N75-NA User Manual Issue 1.
N75-NA User Manual Copyright © Neoway Technology Co., Ltd 2019. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Neoway Technology Co., Ltd. is the trademark of Neoway Technology Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice This document provides guide for users to use N75-NA.
N75-NA User Manual Contents 1 About N75-NA .......................................................................................... 1 1.1 Product Overview ......................................................................................................................... 1 1.2 Block Diagram .............................................................................................................................. 1 1.3 Basic Features ................................................................
N75-NA User Manual Table of Figures Figure 1-1 Block Diagram .................................................................................................................. 2 Figure 3-1 N75-NA pin definition (Top View) ...................................................................................... 1 Figure 3-1 Top view of N75-NA .......................................................................................................... 2 Figure 3-1 Bottom view of N75-NA ............................
N75-NA User Manual Table of Tables Table 1-1 Variant and frequency bands.............................................................................................. 1 Table 4-1 Electric features .................................................................................................................. 3 Table 4-2 Temperature features ......................................................................................................... 3 Table 4-3 ESD protection features ........................
N75-NA User Manual About This Document Scope This document is applicable to N75-NAseries. It defines the features, indicators, and test standards of the N75-NA module and provides reference for the hardware design of each interface. Reference designs in this document are only for reference. Customers should design applications based on the actual scenarios and conditions.Please contact Neoway FAE if you have any question or doubt.
N75-NA User Manual Related Documents Neoway_N75-NA_Datasheet Neoway_N75-NA_Product_Specifications Neoway_N75-NA_AT_Command_Manual Neoway_N75-NA_EVK_User_Guide Neoway Module Reflow Manufacturing Recommendations Copyright © Neoway Technology Co.
N75-NA User Manual 1 About N75-NA N75-NA is an industrial-grade 4G module developed on Qualcomm platform. It supports GSM/GPRS/EDGE, WCDMAR99 to DC-HSPA+, and LTE Cat4. With various hardware interfaces and optinal GNSS functions, N75-NA is well applicable to wireless metering terminals, in-vehicle terminals, POS, industrial routers, and other IoT terminals. 1.1 Product Overview N75-NA series include multiple variants. Table 1-1 lists the variants and frequency bands supported.
N75-NA User Manual Figure 1-1 Block Diagram ANT_MAIN ANT_DIV ANT_GNSS RF Front-end (PA/ASW/DUP/SAW) for PA/ASW VBAT TRX RF transceiver TRX&MIPI UART SPI I2C CONNECTIVITY VBAT Input PM RFFE I/F S Power Manager RESET ADC Interfaces PWRKEY Output PM VDDs Base Band SPMI VDDs VDDs for MCP I2S/PCM ADC GPIO UIM USB PM_GPIOs SDIO MEMORY SUPPORT SGMII LPDDR2 SDRAM MCP NAND 19.2M crystal 1.3 Basic Features Parameter Physical features Description Dimensions: 30 mm * 28 mm * 2.
N75-NA User Manual Sleep2: < 4 mA Idle3: < 20 mA Operating Current Operating mode4 (LTE networks) Current in data service: about 250 mA Current in max. RX power: about 580 mA (FDD-LTE B1), 380mA (TDD-LTE Band41) MIPS processor ARM Cortex-A7 processor, 1.3 GHz main frequency Memory ROM+RAM: 2Gb+1Gb Operating Bands See Table 1-1. GPRS: Max 85.6 Kbps(DL) / Max 85.6 Kbps(UL) EDGE: Max 236.8Kbps(DL) / Max 236.8Kbps(UL) Wireless rate WCDMA: DC-HSPA+，Max 42Mbps (DL)/Max 5.
N75-NA User Manual Two 15-bit ADC interfaces, detectable voltage ranging from 0.1 to 1.7V One I2S/PCM interface, used to connect to CODEC chipset One SDIO interface, used to control WLAN One SGMII/MDIO interface, used for Ethernet Four GPIO interfaces AT Command Neoway extended commands Data PPP, RNDIS, ECM, RMNET Protocol TCP, UDP, MQTT, FTP/FTPS, HTTP/HTTP(S), SSL, TLS Certification approval FCC, PTCRB, AT&T, CE-R, GCF, RoHS, NCC*, RCM* Copyright © Neoway Technology Co.
N75-NA User Manual 2 Compliant Standards ⚫ 3GPP TS 07.
N75-NA User Manual 3 Pinsand Appearance There are 100 pins on N75-NA and their pads are introduced in LGA package. 3.1 Pad Layout Figure 2-1 shows the pad layout of N75-NA. Figure 3-1 N75-NA pin definition (Top View) Copyright © Neoway Technology Co.
N75-NA User Manual 3.2 Appearance Figure 3-1 Top view of N75-NA Figure 3-1 Bottom view of N75-NA Label in the above figure indicates N75-NA NA variant. Labels of other variants are similar. Copyright © Neoway Technology Co.
N75-NA User Manual 4 Electric Feature and Reliability This chapter describes the electric features and reliability of N75-NA, including current and voltage of each power pin, operating and storage temperature ranges, and ESD protection features. 4.1 Electric Features Table 4-1 Electric features Parameter Minimum Value Typical Value Maximum Value Vin 3.3V 3.8V 4.3V Iin / / 2A VBAT ⚫ If the voltage is lower than threshold, the module might fail to start.
N75-NA User Manual 4.3 ESD Protection Electronics need to pass ESD tests. Table 4-3 shows the ESD capability of key pins of this module. It is recommended to add ESD protection based on the application scenarios to ensure product quality when designing a product. Humidity 45% Temperature 25℃ Table 4-3 ESD protection features Testing Point Contact Discharge Air Discharge VBAT ±8kV ±15kV GND ±8kV ±15kV ANT ±8kV ±15kV Cover ±8kV ±15kV Others ±2kV ±4kV Copyright © Neoway Technology Co.
N75-NA User Manual 5 RF Features N75-NA supports 2G/3G/4G network modes and frequency bands as well as GNSS function.This chapter describes the RF features of N75-NA. 5.
N75-NA User Manual 5.
N75-NA User Manual Positioning precision (in air) < 3m (CEP50) Hot start (in air) <2.5s Cold start (in air) <35s Update frequency 1Hz by default CNRin/CNRout 3dB Max. positioning altitude 18000m Max. positioning speed 515m/s Max.
N75-NA User Manual 6 Mechanical Features This chapter describes the mechanical features of N75-NA. 6.1 Dimensions Figure 6-1 N75-NA dimensions The unit is mm. Copyright © Neoway Technology Co.
N75-NA User Manual 6.2 Label The label is made of materials that are deformation-resistant, high-temperature-resistant and it can endure high temperature up to 260 °C. fade-resistant, and Figure 6-2 N75-NA label ⚫ The picture above is only for reference. ⚫ The silk-screen printing must be clear. No blur is allowed. ⚫ The material and surface finishing must comply with RoHS directives. 6.
N75-NA User Manual N75-NA module Tape Copyright © Neoway Technology Co.
N75-NA User Manual Reel 6.3.2 Moisture N75-NA is a level 3 moisture-sensitive electronic elements, in compliance with IPC/JEDEC J-STD-020 standard. If the module is exposed to air for more than 48 hours at conditions not worse than 30°C/60% RH, bake it at a temperature higher than 90 degree for more than 12 hours before SMT.Or, if the indication card shows humidity greater than 20%, the baking procedure is also required.Do not bake modules with the package tray directly. Copyright © Neoway Technology Co.
N75-NA User Manual 7 Mounting N75-NA onto Application Board N75-NA is introduced in 100-pin LGA package. This chapter describes N75-NAV5 foot print, recommended PCB design and SMT information to guide users how to mount the module onto application PCB board. 7.1 Bottom Dimensions Figure 7-1 Bottom view Copyright © Neoway Technology Co.
N75-NA User Manual 7.2 Application Foot Print Figure 7-2 Recommended Application Foot Print (Top View) 7.3 Stencil The recommended stencil thickness is at least 0.12 mm to 0.15 mm. 7.4 Solder Paste The quality of the solder joint depends on the solder paste volume and the PCB flatness. Do not use the kind of solder paste different from our module technique. ⚫ The melting temperature of solder paste with lead is 35 °C lower than that of solder paste without lead.
N75-NA User Manual 7.5 SMT Furnace Temperature Curve Thin or long PCB might bend during SMT. So, use loading tools during the SMT and reflow soldering process to avoid poor solder joint caused by PCB bending.
N75-NA User Manual 8 Safety Recommendations Ensure that this product is used in compliant with the requirements of the country and the environment. Please read the following safety recommendations to avoid body hurts or damages of product or work place: ⚫ Do not use this product at any places with a risk of fire or explosion such as gasoline stations, oil refineries, etc ⚫ Do not use this product in environments such as hospital or airplane where it might interfere with other electronic equipment.
N75-NA User Manual A Conformity and Compliance A.1 Approvals ⚫ FCC ⚫ PTCRB ⚫ AT&T ⚫ CE-R ⚫ GCF ⚫ RoHS ⚫ NCC* ⚫ RCM* A.2 American Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. A.2.
N75-NA User Manual A.2.3 FCC Class B Digital Device Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
N75-NA User Manual Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). 3. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations 4. For FCC Part 15.
N75-NA User Manual Band GSM850 GSM1900 WCDMA B2 WCDMA B4 WCDMA B5 Antenna type External antenna External antenna External antenna External antenna External antenna Peak Gain (dBi) 3 3 3 3 3 Band LTE B2 LTE B4 LTE B5 LTE B7 LTE B12 Antenna type External antenna External antenna External antenna External antenna External antenna Peak Gain (dBi) 3 3 3 3 3 Band LTE B13 LTE B25 LTE B26 LTE B66 LTE B71 Antenna type External antenna External antenna External antenna E
N75-NA User Manual List of applicable FCC rules This module has been tested and found to comply with part 22, part 24, part 27, and part 90 requirements for Modular Approval. The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.
N75-NA User Manual B Abbreviation Abbreviation English Full Name ADC Analog-Digital Converter bps Bits per second BLSP BAM low-speed peripheral DC-HSPA+ Dual-carrier HSPA+ EDGE Enhanced GSM EV-DO Evolution Data Optimized FDD Frequency Division Duplex GNSS Global Navigation Satellite System GPIO General-Purpose Input/Output GPRS General Packet Radio Service HSPA+ High-Speed Packet Access I2C Interintegrated Circuit I2S Inter-IC Sound LGA Land Grid Array LTE Long-Term Evolution
N75-NA User Manual UART Universal asynchronous receiver-transmitter USIM Universal Subscriber Identity Module UMTS Universal Mobile Telecommunications System USB Universal Serial Bus USB-OTG Universal serial bus on-the-go WCDMA Wide-band Code Division Multiple Access WCI Wireless Coexistence Interface WLAN Wireless Local Area Network Copyright © Neoway Technology Co.
