Quick Start Guide

ManualsBrandsneoway ManualsComputers & AccessoriesLTE OBD dongle



1.AboutN2610‐US

N2610‐US is an intelligent OBD solution, which integrates 2G/3G/4G modem, Wi‐Fi, BT, GPS,

acceleration sensor and ECU communication module. Developed on Qualcomm chipset and ST

MCU, it can provide vehicle position, collect statistics on vehicle trajectory, reconstruct driving

behavior,collectstatisticsonfuelconsumption,track

vehicletopreventtheft,readvehiclestatus,

read/clear vehicle fault codes, etc. It also supports Wi‐Fi hotspot function. This OBD solution is

well applicable to individual consumers, fleet management, UBI, vehicle rental and vehicle

maintenance



1.1ProductFunctions

 GPRS/UMTS/LTEcommunications

 Realtimevehicledata



 VehicleDTCcode

 GPS/GLONASS/

 BS/A‐GPSpositioning

 SupportWi‐Fihotspot

 Bluetoothcommunications

 Supplementarytransmissionfor

 blind‐areadata

 Swappingalarming

 FOTAupgrade

 Sleepingandawaking

 Drivingbehavioranalysis



1.2PackageContent

part unit Quantity

N2610‐USOBD pcs 1

Quickstartguide Copy 1



2ProductFeatures

Features Description

Developednetwork

standardscompliant

DevelopedonQualcommchipsetabletooperateonnetworksof

multiplecountries

Wideoperatingvoltage

range

12V/24Vpowersupply,applicabletodifferentvehiclemodels

Drivingbehavioranalysis

Built‐inaccelerationsensorandgyroscopetocollecttheinformation

aboutdrivingbehaviors

Complete&stable

Applications

Devicemanagement,positionfix,vehiclediagnosis,drivingbehavior

analysis,andotherapplications

Summary of content (4 pages)

PAGE 1
.About N2610‐US N2610‐US is an intelligent OBD solution, which integrates 2G/3G/4G modem, Wi‐Fi, BT, GPS, acceleration sensor and ECU communication module. Developed on Qualcomm chipset and ST MCU, it can provide vehicle position, collect statistics on vehicle trajectory, reconstruct driving behavior, collect statistics on fuel consumption, track vehicle to prevent theft, read vehicle status, read/clear vehicle fault codes, etc. It also supports Wi‐Fi hotspot function.
PAGE 2
Wi‐Fi Hotspot In‐vehicle Wi‐Fi hotspot provides network access for in‐vehicle terminals  Various OBD‐II Protocols    ISO 9141‐2, ISO14230‐4, ISO15765‐4, SAE J1850 VPW (GM vehicles) SAE J1850 PWM (Ford vehicle) SAE J1939 3 How to Install and Start 3.1Install When the vehicle is shut down, insert the device into the OBDII interface. This interface is usually located under the dashboard of the vehicle and above the accelerator pedal. If not, refer to the schematic or your owner's manual.
PAGE 3
Status Colour describe GNSS Red positioned: always on Not positioned: on for 1 second and off for 1 second Net green Unregistered network: on for 1 second and off for 1 second Registered network: on for 2 seconds and off for 1 second Login platform: always on 3.5 Platform Operation Set the dialup prof ile, server IP address, and port through an SMS message to log in to the server. Then you can query and set the device parameters.
PAGE 4
§ 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body.