APPLICATION NEXT ASSY REVISIONS PROJECT NO. ECN NO. --- REV 1.13 1.14 1.15 1.16 1.17 APPROVALS DESCRIPTION DATE SPECIFICATION RELEASE UPDATE SPECIFICATION UPDATE SPECIFICATION UPDATE SPECIFICATION UPDATE SPECIFICATION APPROVALS APPROVED 5/6/2015 6/30/2015 7/20/2015 8/19/2015 9/4/2015 DATE HP RESTRICTED DRAWN THIS DOCUMENT ASSOCIATED AND DATA ANY CONTAIN CHECKED RESTRICTED INFORMATION THAT DSGN ENGR IS HEWLETT-PACKARD (HP) PROPERTY.
TABLE OF CONTENTS 1. SCOPE....................................................................................................................................................................................6 2. ORDER OF PRECEDENCE................................................................................................................................................6 3. DESIGN FOR ENVIRONMENTAL REQUIREMENTS (GENERAL PRODUCT REQUIREMENTS)...................6 4. GENERAL EXPECTATIONS.............
REVISION HISTORY Revision Date Author Description 1.10 2/13/15 Nam Nguyen Official release 1.11 4/9/15 Nam Nguyen Dimension change 167.2mm x 90.2mm 1.12 4/16/15 Nam Nguyen Add support for AiO Stand base. Add different support for DC plug for Standalone and AiO stand base.
1.13 5/5/2015 Nam Nguyen Add new part number for power adaptor with 1.5M cable Update GP file Update material, color for top and bottom cover. 1.14 6/22/2015 Nam Nguyen Delete Switch Delete Audible Change LED from Bi-Color to Single Color Update LED behavior table Update GP file (BOLT_GB_DB_15-0618) Update color and material 1.
1. SCOPE This specification defines the requirements for a tri-mode (Qi, PMA, A4WP class 2) wireless charging module for charging a single phone or phablet of up to 6 inch diagonal screen length. The OEM need to provide the complete wireless charging solution and required certifications. This module will be standalone module or integrated to AiO stand base. The standalone module will have cover around the electronic, coil, and shielding. For AiO stand base, only the electronic, coil, and shield. 2.
3.1.1 3.1.1.1 Environmental Design Requirements The following embedded document contains environmental requirements that the product must incorporate into its design to meet both regulated and HP-voluntary initiatives. Any deviation from these requirements will cause this product to not be in compliance with the standards that HP enforces to maintain its responsibility to the environment. Environmental System Specification for 2016 CMIT Acessories - 012914.docx 3.1.2 3.1.2.
4. GENERAL EXPECTATIONS a) All documents shall be provided in electronic form in industry standard formats such as Adobe Acrobat PDF, Microsoft Excel, etc. unless otherwise indicated. Adobe Acrobat documents should be searchable and generated from an electronic document–not from a document which was scanned. b) Any performance related discussions shall be between HP/wireless charge suppliers only. c) Measurement/simulation data shall be provided to HP only. d) Mechanical related information (e.g.
6. WIRELESS CHARGE DESIGN REQUIREMENTS HP reserves the right to modify the design requirements with advance notice. 6.1 WIRELESS DESIGN Technology: Tri Mode (Qi, PMA, and A4WP Class 2) Power: Qi & PMA 5W delivered to receiving device; A4WP Class 2 10W delivered to receiving device. X-Y Dimension: 167.2mm x 90.2mm (of charging surface and electronic) Thickness: As thin as possible.
Certification: ODM need to obtain all applicable regulatory certifications for A4WP and PAM standards body certifications Location of Certification Logo: TBD Icon/Logo: Top icon location for centering the device (Final icon TBD) 6.1.1 Power Adaptor 6.1.2 See spec 794797-A -WAE009-022G2 => 1.5 mm DC cable LED Behavior (preliminary) LED luminance: Flashing: Pulsing: 100 nits.
o 6.1.
7.
Unless otherwise specified in the contract or purchase order, the supplier shall be responsible for the quality of the part as it is delivered to HP. The supplier shall be responsible for having controlled processes to ensure product is in total compliance with this specification. Failing lots shall be subject to return or other supplier-corrective action.
109893_AC_001.pdf NOTE: The USB port is just only for engineering purposes in the factory and cannot not be used by the end-user. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This device complies with part 15 of the FCC rules.