Installation Instructions
1. Slimtouch
Slimtouch is a wireless keypad that can be used with the Box 98 to
control window treatment devices.
It has 6 touch-screen pads that can activate up to 6 automation
scenes previously created on the Neocontrol Pro APP.
Document version - v.01
www.neocontrolglobal.com
This is a free manual and part of the product, thus, it can not be
sold separately, copied or duplicated without the prior written
permission of Neocontrol US LLC.
To ensure safety, please read this manual carefully
before installation and follow the instructions herein.
Sensitive to humidity! The device must not come in
contact with liquids or be exposed to excessive moisture
environments.
Recyclable product. Dispose appropriately in the
proper facilities.
Prior to installation, make sure that the power outlet
of the place you are installing the device follows the
instruction indicated on the device’s label.
ENGLISH
2. Technical information
• Power Supply: 2 battery 3V (CR2032)
• Trigger up to 6 scenes
• Does not require infrastructure
• Low battery consumption
• Data communication: RF command (only TX)
• Compatible with Box 98;
• Radio Frequency: 433.42 Mhz;
• RF Signal Range : 80 ft;
• Maximum RF signal power: 10mW
• Operating temperature: -10°C to +70°C
• Humidity: +5% to 95% non-condensing;
Neocontrol US LLC.
Copyright © 2019
All rights reserved.
SLIMTOUCH
3. Sensitivity
• Each time the batteries are inserted into the
product, you can select the key sensitivity.
When the batteries are inserted the 6 keys
will light up sequentially, the keys will stay lit
for 1 second.
• When the batteries are inserted the device will
allow you to adjust the sensitivity by clicking in one of the 6
pads. The rst pad will set the highest sensitivity while the
last sets the lowest sensitivity.
• The product will blink the selected key conrming the selec-
tion, if no key is touched it will keep the last conguration
saved. This can be changed by repeating the process.
5. Registering the Slimtouch
To register the keypad, use the Neocontrol Pro APP, and add a
new device. Scan the QR code located on the upper right corner.
Follow the APP instructions.
Slimtouch is powered by 2 CR2032 batteries.
To insert the battery proceed as follows:
• Remove the cover.
• Insert the batteries with the positive pole facing the wall.
• Place the cover.
4. Battery Exchange
www.neocontrolglobal.com
Fragile. Handle the device carefully, avoid impacts.