How-To Guide

8 – FACTORY RESET
If you need to factory reset the Box 98 for any reason,
press and hold the reset button located on the back
part of it. The LED will start blinking. Hold the reset
button pressed until the LED becomes red and solid
(approximately 40s), then release the reset button. The
Box 98 will be reset after 2 min and all the configurations
will be lost.
Important: This equipment operates in the second
instance, that is, it is not entitled to protection
against harmful interference, even from other
products of the same type, and cannot cause
interference to systems operating in the primary
instance.
BOX 98
www.neocontrolglobal.com
Doc. version - V1.0
Neocontrol US LLC.
Copyright © 2019
All rights reserved.
To ensure safety, please read this manual carefully
before installation and follow the instructions herein.
Prior to installation, make sure that the
power outlet of the place you are installing the
device follows the instruction indicated on
the device's label.
Sensitive to humidity! The device must not come in
contact with liquids or be exposed to excessive
moisture environments.
Fragile. Handle the device carefully, avoid impacts.
Recyclable product. Dispose appropriately in
the proper facilities.
ENGLISH
This is a free manual and part of the product, thus, it cannot
be sold separately, copied or duplicated without the
prior written permission of Neocontrol US LLC.
1 - INTRODUCTION
The Box 98 is the main device of the Neocontrol Pro
Platform. This system was created to integrate
motorized window treatments via APP, voice control,
keypads and more.
2 - SAFETY AND RESPONSIBILY
Please read this guide carefully before installing and using
the product.
3 - FUNCTIONALITY
• Window Treatm
ents Motors Control;
• Create and Customize Scenes;
• Remote
Access;
• Scheduling Feature;
• 32 RF Channels
4 - TECHNICAL INFORMATION
• Input Voltage: 5vdc / 50-60Hzz;
• Communication: RF Commands;
• Radio Frequency: 433.42 Mhz;
• RF Signal Range : 80 ft;
• Storing Temperature Range: 0°C to +50°C;
• Humidity: +5% to 95% non-condensing;
• Wi-Fi network communication (2.4 Ghz)
5 - HOW TO INSTALL
A - Download the APP on your smartphone
• Click on the "+" icon (Add Devices); Select "Other"
and "RF Control". You will be able to name the
device according to your preference and also to choose
the kind of motor and shade you want. Once you
complete the related selection, click on "OK" and the
device will be added and listed among your list of
devices.;
• To pair the motor with the Box 98, set the motor to
the programming mode, then access the channel you
want on the APP, click on "Edit" and then click on
"Program". The motor should indicate that the pairing
was successful and the APP will be controlling the motor;
7 - IMPORT / EXPORT SETTINGS
• To EXPORT your settings to another mobile,
access the "Settings Menu", then "Export Settings".
Choose the exporting mode (Admin or User) and
send the Config File via email.
• To IMPORT the settings on another mobile device,
Download the APP, Start the APP and type your
Name and email. Open the email which contains the
Config File attached to it. Download the file and open
it using the Neocontrol Pro APP.
• When the APP is first launched the following
message will pop up; “Neocontrol would like to send
you notifications”. Click on ”Allow” to receive
important notifications.
• Click on “Start”.
B - Type a user name and password, than press “Enter”
C - Click on the "+" icon (Add Devices) located in
the upper right part of the APP screen. The APP will
ask permission to have access to the camera;
D - Click on “OK” and scan the QR code (located
underneath the Box 98);
E - Plug your Box 98 to the power outlet
F - The hub's LED will star blinking. Follow the
APP instructions.
6 - ADDING AND PAIRING RF MOTORS
• You can add up to 32 RF channels per Box 98. To
sync other motors repeat the same process.