Smart Camera instruction Product configuration and installation 23AI Power input Reset button T/F card slot Specifications Power Supply：5V/1A Resolution Ratio: 1280x720, 640 x 360 Night Vision Range：5-10M Wireless Type: 2.
Wireless Range: 30M Protocol: IEEE 802.11b/g/n Operating Temperature: 0°C～ 55°C (32°F～131°F) Operating Humidity: 20% ～ 85% Reset: Long press the resetting button for 5-7s. When you hear a prompt tone, the device reset successfully. （56AI reset key on the tail line） FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Register and Login Launch the "Smart life" app.to register,enter your mobile phone number or email address,create a password ,then login to the app. Login if you have an account already. Add Device REMARK:The device only supports QR code net-pairing and Smartconfig mode ●Tap the icon “+” (see top right corner) or tap “ADD DEVICES”; ●Select “Smart Camera” in the device list; ●Follow the instructions in the application to add device. 1.
2. Smartconfig Mode ●Tap “Otherwise”; (see top right corner) ●Power the device on and make sure the indicator is lashing quickly or a prompt tone is heard; ●Tap “next step” and enter Wi-Fi Password and confirm; ●Waiting for connecting. When it is connected, the device will has a prompt tone and app will shows 100%. Main Function Introduction 1. Main Interface HD/SD Sound Screenshot Settings Full Screen Record Speaker Alarm Settings Playback Cloud Storage 2.
3. Two-Way Audio; ●The mobile phone can communicate with the device 4. Motion Detection Settings ●Tap Settings; (see top right corner); ●Select “Motion detection”; ●Motion detection can be turned off in Settings. 5. Cloud Storage (This function needs to be purchased from the APP) ●Video data can be stored in the cloud; ●When the device is offline or lost or stolen, the previous video can also be viewed through the cloud.
. Alarm Notification ●Tap “Me”; (see bottom right corner); ●Select “Message Center” and to view alarm event. 7. Remove Delete and Restart Device ●Tap Settings; (see top right corner); ●At the bottom of the screen, you will see “Remove Delete” and “Restart Device”. Settings 1.
2. Share Device If you want to delete a sharing account, you can slide to the left. 3.
Make Your Home Smarter
