Safety Instructions

（ 1）
（ 2）
1.
. If you are using this as an outdoor
decoration, use the provided Ground stakes
(C) to secure the tree to the ground.
C
PART
DESCRIPTION QUANTITY
B
1
A
B
C
Body
Base
Ground stake
A
A
C C
THE GUIDELINE FOR 5FT Neon Deer and Gift box Sleigh
Model No.: DSN-XM-OX0022
Adapter Rang : Input 100-240V~ 50/60Hz 0.2A Output 29V 310mA 9W
IMPORTANT SAFETY INSTRUCTIONS A) READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
b)Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are
used in outdoor applicaons, connect the product to a Ground Fault Circuit interrupng (GFCI) outlet. If one is not
provided, contact a qualified electrician for proper installaon.
c) This seasonal use product is not intended for permanent installaon or use.
d)Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat. e) Do not
secure the wiring of the product with staples or nails, or place on sharp hooks or nails. f) Do not let lamps rest on
the supply cord or on any wire.
g)Unplug the product when leaving the house, when rering for the night, or if le unaended.
h)This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not
be played with or placed where small children can reach it. i) Do not use this product for other than its intended
use. j) Do not hang ornaments or other objects from cord, wire, or light string.
k)Do not close doors or windows on the product or extension cords as this may damage the wire insulaon. l) Do
not cover the product with cloth, paper or any material not part of the product when in use.
m) This product is equipped with non-replaceable lamps. Do not twist lamps. And if non-replaceable lamps burn
out or damaged, do not try to repair or replace it, it shall be discarded. n)Read and follow all instrucons that are
on the product or provided with the product.
WARNING: When using outdoor use portable lighng products, basic safety precauons
should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:
READ ALL INSTRUCTIONS
(a) Ground Fault Circuit Interrupter (GFCI) protecon should be provided on the circuits or outlet to be used for
the outdoor use flexible lighng product. Receptacles are available having built-in GFCI
protecon for this measure of safety.
HOW TO ASSEMBLE
Maintain and Care
You should maintain and care for the light kit in the following areas before storage.
1. Clean and wipe all the metal parts. Use rust removal product (not included) such as WD-40 to clean any rusty spots if
there is any when powder coang is damaged. (Note: Follow the rust removal product instrucons when using it.)
2. Repaint any spots where the paint on the metal part is damaged. (Note: Paint not included)
3.
Clean and wipe the light strands and all other parts. (Important: DO NOT let any part of this product submerge or soak in water.)
4. Be sure all parts are dry before storage.