Safety Instructions

ManualsBrandsNeo-Neon Development ManualsElectronics16.4FT RGB Neon Flex

Table Of Contents

Page 1

THE GUIDELINE FOR 16.4FT RGB Neon Flex

MODEL: SN-FCB-5050-4W-16.4FT-120V-Ex-RGB

120V,

60Hz, 0.26A

Made in Vietnam

IMPORTANT SAFETY INSTRUCTIONS:

(a)READ AND FOLLOW ALL SAFETY INSTRUCTIONS

(b) Do not cover this product as the covering may cause the flexible light to overheat and melt

or ignite.

(d) Do not puncture, cut, shorten, or splice the flexible lighting.

(e) Do not route the cord or flexible lighting through walls, doors, windows or any like part of the

building structure.

(f) Do not use if there is any damage to the light or cord insulation. Inspect periodically.

(g) Do not submerge flexible light in liquids, or use the product in the vicinity of standing water

or other liquids.

(h) Secure this flexible light using only the hangers or clips provided. Do not secure this

product or its cord with staples, nail

s, or like means that may damage the insulation or

permanently attach to the building structure.

(i) Do not subject flexible lighting to continuous flexing.

(j) This product has a polarized plug (one blade is wider than the other) as a feature to reduce

the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not

fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never

usewith an extension cord unless plug can be fully inserted. Do not alter or replace the plug.

(k) All units must be unplugged before adding additional segment.

(l) Use only the same series extension segments model manufactured by the same

manufacturer,

(m) Ensure all connections and the end cap on the last

segment is tightly secured to preclude

the entry of water. (n) Do not install on gates or doors, where subject to flexing.

(o) Do not mount or secure rope light in a manner that can cut the outer jacket or damage the

cord insulation. Inspect the rope light carefully before use and discard any rope light that have

broken outer jacket, loose connections, or frayed wire insulation.

(p) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not

be removed. Discard product if the attachment plug is damaged.

(q) Do not rub or knead the products continuously, the smallest bending radius is more than

8cm.

(r) Do not operate with the flexible light tightly coiled. To prevent overh

eating do not allow

contact between flexible light cables and parts of light cables. Maintain at least 12mm spacing

between flexible light cables or parts of light cables.

(s) Do not install in cabinets, tanks or enclosures of any kind.

Summary of content (5 pages)

PAGE 1
THE GUIDELINE FOR 16.4FT RGB Neon Flex MODEL: SN-FCB-5050-4W-16.4FT-120V-Ex-RGB 120V, 60Hz, 0.26A Made in Vietnam IMPORTANT SAFETY INSTRUCTIONS: (a)READ AND FOLLOW ALL SAFETY INSTRUCTIONS (b) Do not cover this product as the covering may cause the flexible light to overheat and melt or ignite. (c) Do not operate with the flexible light tightly coiled. (d) Do not puncture, cut, shorten, or splice the flexible lighting.
PAGE 2
CAUTION: a) DO NOT EXCEED THE MAXIMUM NUMBER OF EXTENSIONS OR FLEXIBLE LIGHT LENGTHS PERMITTED BY THE MARKING. b) All units must be unplugged before adding additional segment. c) Maximum total extension length: ’. Ensure all connections and the end cap on the last segment are tightly secured to keep water from entering. Use only extension segments recommended by the manufacturer of this system. WARNING-Risk of fire and electric shock, uncoil flexible light prior to plugging into receptacle.
PAGE 3
HOW TO INSTALL ROPE LIGHT The design of rope light follows the principle of user-friendly and customized. install it in different smooth surface, such as wood, plastic, metal and porcelain, etc. It can be design and apply in different shape, easy to connect. A. Face up lighting part when install clips. B. Check all accessories are in properly installation before plug to electricity. C. Bend only back, do not bend from side. D. Fix mounting clips with nails or screws onto support surfaces.
PAGE 4
IR RECEIVER FUNCTION BUTTON Picture D Picture C Control Box By depressing the button on the Control box (Picture D),the light strip can be controlled to switch between all 16 static colors and preset functions of the light strip. WARNING Remote Control contains button cell battery. HAZARDOUS IF SWALLOWED KEEP OUT OF REACH OF CHILDREN * SWALLOWING THE BATTERY MAY LEAD TO SERIOUS INJURY OR DEATH IN AS LITTLE AS 2 HOURS DUE TO CHEMICAL BURNS AND POTENTIAL PERFORATION OF THE OESOPHAGUS.
PAGE 5
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.