Content 1 2 3 General Information ................................................................................................................................................. 4 1.1 Profile.............................................................................................................................................................. 4 1.2 Safety Information .................................................................................................................................
4 5 Input method ........................................................................................................................................................... 16 4.1 Icons for Input Methods ................................................................................................................................ 16 4.2 To Shift Entry Methods ................................................................................................................................. 16 4.
6 5.12 FM Radio ...................................................................................................................................................... 24 5.13 Audio Player ................................................................................................................................................. 25 5.14 Alarm ............................................................................................................................................................
1 1.1 General Information Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, refer to your phone for details. 1.
SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight. ¾ SWITCH OFF BEFORE ENTERING RISKY AREAS Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas.
Use only in a normal and proper manner. ¾ EMERGENCY CALLS Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so. Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some networks even do not support the emergency call service.
2 2.1 Phone overview 2.
navigate. OK key Press it to confirm your selection. In idle screen, long press OK key can turn on/off torch which situates at the top of the phone. Delete key Press it to delete a character before cursor. Linefeed This key helps to switch to another line when the interface is in the edit interface. Shift key Press this key to switch between input methods. Space key Press it in the edit interface to get a blank.
2.3 Technical specifications Phone Dimensions (W×D×H): Weight: Lithium battery Rated capacity: Continuous standby duration: (Relates to network status) Continuous conversation duration: (Relates to network status) Please refer to their labels for other data related to the battery and the charger. 3 3.
Hold the End key for a while to power off the mobile phone Push the back cover above the battery and remove it. Pull the left battery buckle outward and then lift the battery away. Insert the SIM card into the SIM card slot lightly with the corner cutting of the card aligning to the notch of the slot and the gold plate of the card facing download, till the SIM card cannot be further pushed in.
locked if you input wrong PIN code for three times. Unlocking methods as follows: -Input the correct PUK according to the screen tips to unlock the SIM card. -Then input the new PIN and press the OK key. -Input the new PIN again and then press the OK key. -If the input PUK is correct, the SIM card will be unlocked and the PIN will be reset. Note: The SIM card will be locked if you input wrong PIN code for three times. To unlock the SIM card, you need to input the PUK.
1. The mobile phone cannot automatically identify the T-flash card being inserted when the mobile phone is powered on. You must power off the mobile phone and then power it on, so that the phone can identify the T-Flash card. 2. The T-Flash card is a miniature object. Keep it out of the reach of children for fear that children swallow it! 3.3 Charging the Battery The lithium battery delivered with the mobile phone can be put into use immediately after being unpacked.
During the charging, the battery level grids in the battery icon keep flickering till the battery is fully charged. It is normal of the battery to become hot during the charging period. The battery icon does no longer flicker when the charging process ends. Note: Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are inserted in the right direction. Inserting them in a wrong direction may cause charging failure or other problems.
Immediately stop using the battery if the battery produces odor, overheats, cracks, distorts or has other damage, or if the electrolyte leaks. The battery wears out with use. A longer charging time is required as the battery is put into use for a long time. If the total conversation duration decreases but the charging time increases even though the battery is properly charged, purchase a standard battery from the OEM or use a battery approved by our company.
3.5 Linking to the Network After the SIM card and the mobile phone are successfully unlocked, the mobile phone automatically searches for an available network. After finding a network, the mobile phone enters the standby state. When the mobile phone is registered in the network, the name of the network operator is displayed on the screen. Then you can dial or receive a call. 3.
incoming call when using a function list or browsing the phonebook. 3.7 Using the Headset It would enter headset mode automatically when you insert headset to the slot. Make sure of inserting it at the bottom of the slot, or you can’t use it normally. 4 Input method This mobile phone provides two input methods, including English input and numeric input. You can use these input methods when editing the phonebook, short messages, files and greeting text. 4.
4.3 Numeric Input You can input numbers with the numeric input method. Press a number key to input the corresponding number. 4.
4.5 To input a blank, press Space. To clear wrong inputs, press the delete key. Inserting a Symbol Press the sym key to enter the Select symbol interface and select a symbol you want. 5 5.1 Using the menu Messaging If the short message memory is full, a blinking SMS icon appears on the top of the screen. To normally receive short messages, you need to delete some of the existing short messages. Write message Access this menu to create a text message or a multimedia message.
Outbox The messages which are sent failed are stored in the Outbox. Sent messages Sent messages are listed in this menu. Delete messages You can delete messages stored in Inbox, Outbox, Drafts, etc through this function. Broadcast Message This network service enables you to receive a variety of text messages, such as broadcast messages about weather forecast or road conditions. At present, few networks provide this service. Please consult the network operator.
5.2 Phonebook The mobile phone can store up to 300 telephone numbers. The number of telephone numbers that an SIM card can store depends on the storage capacity of the SIM card. The telephone numbers stored in the mobile phone and in the SIM cards form a phonebook. After selecting a telephone number in the phonebook, select Options to perform the following operations: View: View the content of the telephone number. Sent text message: sent text message to this number.
group name, set caller alert, call ringtone and caller picture. Phonebook setting: To set some parameters of phonebook. 5.3 Calendar Once you enter this menu, there is a monthly-view calendar for you to keep track of important appointments, etc. 5.4 Call history Through this function, you can view a list of missed calls, dialed call and received calls. 5.
Homepage: indicates the default website of the internet Bookmarks: used to save most commonly-used websites Input Address: input the website to be searched and press finish button to access to the network directly. Last web address: you can view your last web address through this function. Recent Pages: browse the record of the recently browsed web pages. Settings: set up WAP-related service Note: Consulting the local network operator for related fee and specific setup.
Video recorder This function enables you to record dynamic pictures. In the capture interface, press left or right direction key to tune exposure value; up or down direction key to zoom in and zoom out; OK key to capture videos clip. Video player You can use this video player to play 3gp/mp4 format video files, and the AVI format video files captured by video recorder can also be played through this function.
interface, you can press left or right direction key to search channels manually, down direction key to play/pause the playing process of the current channel, up direction key to enable auto search (once this is enabled, you can press left or right direction key to search channels automatically). You can press I/- or O/+ key to tune volume. 5.9 Camera The phone is provided with a camera, which supports the photographing functions.
5.13 Audio Player Use this function to play audio files. By pressing the direction key can you control the playing process of audio player: play/pause(up direction key), switch to last song/next song (press left or right direction key), fast forward (press and hold right direction key) and rewind (press and hold left direction key), stop (down direction key), play list( OK key). In audio player interface, you can press I/- or O/+ key to tune volume. 5.
not changed the directory, the root directory contains the default folders only. Format You can use this function to format all the data in the memory. The system will re-create a default folder. The formatted data cannot be recovered. Therefore, think twice before using the formatting function. 5.17 Settings Triple SIM switch Manually selected by user and automatically decided by SIM cards are available for you to choose. You can select one of them as per your needs.
Language: Select the display language for the mobile phone. Pref. input method: Select an input method as preferred input method as per your need. Shortcuts: Access this menu to select shortcuts function to display on idle screen.
wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then contact the network. A moment later, the network will make a response and send the operation results to the mobile phone. Line switching: Switch to Line 1 or Line 2. By default, Line 1 is used. Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network operator.
is registered will be displayed. Security Settings This function provides you with related settings about safety use SIM1 security ¾ PIN lock: To activate PIN lock, you need to input the correct PIN code. If you set PIN lock to On, you need to input the PIN each time you power on the mobile phone. In the case you input a wrong PIN for three consecutive times, you need to input the PIN Unblocking Key (PUK). The PUK is used to unlock and change the locked PIN.
5.18 Display Users can access this item to set wallpaper, screen saver, power on/off display, etc. 5.19 Organizer Calendar Once you enter this menu, there is a monthly-view calendar for you to keep track of important appointments, etc. Days with events entered will be marked. Alarm Five alarm clocks are set but deactivated by default. You can activate one, multiple or all of them as needed. For each alarm clock, the ringing date and the ringing time can be set.
specific events and environments. Customize the user profiles according to your preference and then activate the user profiles. The user profiles fall into five scenarios: General, Silent, Meeting, Outdoor and My style. When you insert an earpiece to the mobile phone, the mobile phone automatically enters the Headset mode. There is no option for activating the Headset mode on the screen. For details on operation, refer to General.
5.24 Yahoo Log on Yahoo through a web. 5.25 Twitter Log on twitter through a web. 5.26 Lock keypad Select this function to lock keypad. When the keypad is locked, you can press right soft key then space key to unlock keypad. 5.27 Power off Select this function to power off the mobile phone. When the phone is powered off, you can long press end key to power on it.
Poor received signal quality The SIM card is not in position. The metal face of the SIM card is polluted. Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
Line congestions occur when you use the mobile phone in high-traffic hours Avoid using the mobile phone in high-traffic hours The mobile phone cannot be powered on The battery energy is exhausted.
The mobile phone cannot connect the network The battery cannot be charged The SIM card is invalid Contact your network service provider The mobile phone is not in a service area of the GSM network Move to the network operator's service area The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the
Poor contact Ensure the charger plug is in good contact with the mobile phone -36-
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.