Dishwasher aus Instruction manual S...
Start Reset 3 sec. Setup 3 sec.
aus Table of contents ausI nst r uct i on manual 8 Intended use . . . . . . . . . . . . . . . . 5 ( Safety instructions. . . . . . . . . . . . 5 Before you switch ON the appliance Delivery. . . . . . . . . . . . . . . . . . . . . . . Installation. . . . . . . . . . . . . . . . . . . . . In daily use . . . . . . . . . . . . . . . . . . . . Door lock . . . . . . . . . . . . . . . . . . . . . Button lock . . . . . . . . . . . . . . . . . . . . Damage . . . . . . . . . . . . . . . . . . . . . . Disposal . . .
aus 1 Operating the appliance . . . . . . 26 Changing the settings . . . . . . . . . . . .26 AquaSensor . . . . . . . . . . . . . . . . . . . .26 Sensor setting . . . . . . . . . . . . . . . . . .26 ExtraDry . . . . . . . . . . . . . . . . . . . . . . .26 Auto Power Off . . . . . . . . . . . . . . . . .27 EmotionLight . . . . . . . . . . . . . . . . . . .27 Changing start programme . . . . . . . .27 Tone volume . . . . . . . . . . . . . . . . . . .27 Button volume . . . . . . . . . . . . . . . . . .
Intended use aus 8 Intended use I nt e n d ed u s e ■ ■ ■ This appliance is intended for use in the home and domestic environments. Use the dishwasher only in the home and only for its designated purpose: for washing domestic dishes. This appliance is intended for use up to a maximum altitude of 4000 metres above sea level.
aus Safety instructions Before you switch ON the appliance Please read the instructions for use and installation carefully. They contain important information on how to install, use and maintain the appliance. Retain all documents for later use or for the subsequent owner. You can download the instructions for use from our website free of charge. The relevant Internet address can be found overleaf on these instructions for use. Delivery 1. 2. 3.
Safety instructions aus ■ ■ ■ ■ ■ ■ Also follow the installation instructions for the dishwasher to ensure that all appliances are operated safely. If there is no information or if the installation instructions do not include the appropriate information, contact the manufacturer of these appliances to ensure that the dishwasher can be installed above or below these appliances.
aus Safety instructions : Warning Risk of suffocation! Children may become locked in the dishwasher and suffocate. Always completely close the appliance door when leaving the dishwasher. Activate the child-proof lock (door lock) as follows: 1. Pull the catch of the child-proof lock towards yourself (1). 2. Close the door (2). The child-proof lock is activated. Open the door with activated child-proof lock (door lock) as follows: 1. Press the catch of the child-proof lock to the right (1). 2.
Safety instructions aus Childproof lock (button lock) You can prevent your dishwasher being switched off inadvertently (e.g. by children pressing the buttons). Damage But on l ock Here’s how to activate the button lock: 1. Start the desired programme. 2. Press and hold the F button for about 4 seconds. In the display window you will see ’–. The button lock has now been activated. If any of the buttons are pressed while the programme is running, ’– will appear in the display window.
aus Safety instructions : Warning Risk of injury! ■ To prevent injuries, e.g. caused by stumbling, open the dishwasher only briefly in order to load and unload the dishwasher. ■ Knives and other utensils with sharp points must be placed with the points downwards in the cutlery basket*1Z or horizontally on the knife shelf* or in the cutlery drawer*1*. ■ Do not lean or sit on the open door. ■ In the case of free-standing appliances, ensure that the baskets are not overloaded. The appliance could tip.
Environmental protection aus ■ ■ When opening and closing the door on an eye-level appliance, ensure that children do not become jammed or crushed between the appliance door and the cupboard door below. Children could become locked in the appliance (danger of suffocation) or get into another dangerous situation. Redundant appliances: Pull out the mains plug, sever and dispose of the power cord. Destroy the door lock so that the door can no longer be closed.
aus Getting to know your appliance * Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found at the front of the manual. Individual positions are referred to in the text. Get i ng t o know your ap l i ance Control panel See Fig.
Getting to know your appliance aus Setting up Factory setting Description § Rinse aid §:‹† Amount of rinse aid affects drying. When using Multitabs, select setting 0. †“:‹‹ Adjustment of soiling detection for optimum cleaning result. š:‹‹ / Off Improved drying for glasses and plastic tableware. ‘:‹‹ / Off The dishwasher can be connected to either hot (40-60°C) or cold water (<40°C). ˜:‹‚ Appliance automatically switches off at the end of each wash. “:‹‚ / On Interior light.
aus Rinse aid Setting amount of rinse aid , Rinse aid The rinse aid ensures stain-free dishes and clear glasses. Use only rinse aid for domestic dishwashers. As soon as the rinse aid refill indicator h lights up in the control panel, there is still a rinse aid reserve of 1-2 rinse cycles. Top up the rinse aid. Ri nse ai d Top up the rinse aid as follows: 1. Open dispenser 1j; press lug on the lid (1) and lift (2). 2 1 2. Add rinse aid up to the max. mark.
Utensils aus - Utensils Loading the dishwasher Not suitable is not necessary to prerinse utensils under running water. 2. Place the utensils so that – they are secure and cannot tip over. – all utensils with their openings face down. – parts with curves or indentations are at an angle, thereby allowing water to drain. – does not obstruct rotation of the two spray arms 1: and 1J. Ut ensi l s Cutlery and utensils made of wood. Delicate decorative glasses, craft and antique utensils.
aus Utensils Note: Utensils must not be placed above the tablet collecting tray 1B. These may block the lid of the detergent dispenser and prevent it from opening fully. Tip: Other examples, such as the best way of loading your dishwasher, can be found on our homepage. These can be downloaded free of charge. The corresponding Internet address can be found on the back page of these instructions for use. Cutlery basket * Place cutlery, always unsorted with the tips face down, in the cutlery basket *.
Utensils aus Depending on the features of your dishwasher, you can fold down the side shelves to provide more room for taller items of cutlery. The front rows of prongs can be folded down to provide room for wider handles. Etagere * The etagere and the space underneath can be used for small cups and glasses or for larger items of cutlery, such as wooden spoons or serving cutlery. If you do not require the etagere, it can be folded up. Et ager e &/,&.
aus Utensils Folding spikes * Knife rack * Fol di ng spi kes Kni f e r ack * Depending on the features of your dishwasher, the spikes can be folded down. This facilitates arrangement of pots, bowls and glasses. Fold down the spikes as follows: 1. Press lever forwards (1). 2. Fold down spikes (2). Small items holder * * Depending on the features of your dishwasher, the upper basket is fitted with small items holders. The small items holders can be used to securely attach light plastic parts.
Utensils aus Baking sheet spray head * * depending on the features of your dishwasher Large trays or grilles as well as large plates (gourmet plates, pasta plates, dinner plates) can be cleaned with this spray head. Baki ng she t spr ay head Insert the spray head as follows: 1. Remove upper basket 12. 2. Insert spray head as illustrated and turn to the right. Spray head is engaged.
aus Utensils Adjusting the height of the basket * * depending on the features of your dishwasher If required, the height of the upper basket 12 can be adjusted to create more space for taller utensils either in the upper or lower basket. Arrange large plates up to a diameter of 31/34* cm in the lower basket 1b as illustrated. Adj ust i ng t he hei ght of t he basket Appliance height 81.5 cm With cutlery basket Upper basket Lower basket Setting 1 max. ø 22 cm 31 cm Setting 2 max. ø 24.5 cm 27.
detergent aus Upper basket with side levers 1. Pull out upper basket 12. 2. Hold the sides of the basket along the upper edge. This prevents it from suddenly dropping. 3. To lower the upper basket; press in both levers on the left and right on the outside of the basket. The upper basket lowers. 4. To lift the upper basket; grip the sides of the upper basket along the upper edge and lift. 5. Ensure that both sides of the upper basket are at the same height. 6. Push in upper basket.
aus detergent Adding detergent 1. If the detergent dispenser 9" is still closed, actuate locking bar 9* to open it. 2. Pour detergent into the dry detergent dispenser 9" only (insert tablet flat, not on its edge). 3. Dosage: see manufacturer’s instructions on the packaging. Use graduated detergent dispenser. Usually 20 ml–25 ml are adequate for normal soiling. If using tablets, one tablet is adequate. 50 ml 25 ml 15 ml 4. Close cover on the detergent dispenser. Cover “clicks” into position.
Overview of programmes aus / Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. The programme data has been measured in the laboratory according to AS/NSZ 2007. Over vi ew of pr ogr ames Type of utensils Programme and soiling ±/° all Á/Ù 1.) 1:45 - 2:55 2.) 0,95 - 1,60 3.) 4.) 7 - 18 all Sensor-controlled: Is optimised according to the soiling with the aid of sensors. 1.
aus Overview of programmes Type of utensils Programme and soiling Programme data 1.) Duration: hs/mins 2.) Energy consumption in kWh 3.) Water consumption in litres 4.) With Aquasensor Possible additional options sensitive utensils, cutlery, temperature-sensi tive plastic and Glass glasses slightly adhesive, 40° fresh food remnants 1.) 1:25 - 1:30 2.) 0,85 - 0,90 3.) 14 4.
Additional functions aus 0 Additional functions Ï intensiveZone * Perfect for a mixed load. You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increased slightly. i nt ensi veZone * Depending on the features of your dishwasher, you can select different additional functions `.
aus Operating the appliance 1 Operating the appliance Oper at i ng t he ap l i ance Changing the settings The dishwasher has been preset with certain settings for your convenience. You can change these factory settings. Here’s how to change the settings: 1. Switch on ON/OFF switch (. 2. Press and hold the ‹ button for 3 seconds. In the display window @ you will see §:‹... and ‘ . 3. Press the ‹ button to access the individual settings. 4. Adjust the setting using the buttons and + H. 5.
Operating the appliance aus Auto Power Off (Automatic switch off after end of programme) To save energy, the dishwasher is switched off 1 minute after the programme ends. You can also change this setting. Aut o Power Of Possible settings are: ■ ˜:‹‹: The dishwasher does not switch off automatically. ■ ˜:‹‚: The dishwasher switches off after 1 minute. ■ ˜:‹ƒ: The dishwasher switches off after 2 hours. Note: Note that with the settings ˜:‹‚ and ˜:‹ƒ the interior lighting 1" is switched off.
aus Operating the appliance Time preselection * Interrupting the programme Ti me pr esel ect i on Caution! Expansion (overpressure) may cause the appliance door to jump open and/or water to escape! If the door was opened on an appliance which has a hot water connection or is heated, always leave the door ajar for several minutes and then close it. * depending on the configuration of your specific dishwasher You can delay the start of the programme by up to 24 hours. Here’s how to set up the delay: 1.
Cleaning and maintenance aus 2 Cleaning and maintenance A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems. Cl eani ng and mai nt enance Overall status of the dishwasher *The interior of your dishwasher is predominantly self-cleaning. In order to remove deposits, your dishwasher automatically changes the running of the programme (such as by increasing the cleaning temperature) at certain intervals.
aus Cleaning and maintenance Easyclean Š * Rinse aid Easyclean used in combination with commercially available machine cleaning detergent is a suitable programme for cleaning your dishwasher. Deposits such as grease and limescale can cause your dishwasher to malfunction. In order to avoid such faults and to reduce the development of odours, we recommend cleaning the dishwasher at regular intervals.
Cleaning and maintenance aus 3. Remove any residue and clean filters under running water. 4. Re-install filter system in reverse sequence and ensure that the arrow marks are opposite each other after closing the filter system. Spray arms Limescale and contaminants in the rinsing water may block nozzles and bearings on the spray arms 1: and 1J. 1. Check outlet nozzles on the spray arms for blockages. 2. Unscrew the upper spray arm 1: (1) and remove downwards (2). 3.
aus Fault, what to do? 3 Fault, what to do? Experience has shown that you can rectify most faults which occur in daily operation yourself. This ensures that the appliance is quickly available to you again. In the following overview you can find possible causes of malfunctions and helpful information for rectifying them.
Fault, what to do? aus Fault table Fault Reason Solution “Check water supply” display )" lights up. Supply hose kinked. Install supply hose without kinks. Tap turned off. Turn on the tap. Tap jammed or calcified. Turn on the tap. Flow rate must be at least 10 l/min. when water supply is open. Filter in the water supply blocked. Switch off the appliance and pull out the mains plug. Turn off the tap. Unscrew water connection. Clean filter in the supply hose. Screw water connection on again.
aus Fault, what to do? Fault Reason Solution Fault code “:ƒˆ is lit. Mains voltage too low. No appliance fault, have the mains voltage and electrical installation checked. A different fault code is indicated on the digital display. (“:‹‚ to “:„‹) A technical fault has probably occurred. Switch off the appliance with the ON/OFF switch (.After a short time, restart the appliance. If the problem recurs, turn off the tap and pull out the mains plug. Call customer service and mention the fault code.
Fault, what to do? aus Fault Reason Solution Utensils not dry. Not enough rinse aid in the dispenser, or none at all. Refill rinse aid. Programme without drying was selected. Select programme with drying. Water collecting in depressions on the utensils and cutlery. Arrange utensils in a sloping position, arrange affected utensils as sloping as possible. The combined detergent used has a poor drying performance. Use different combination detergent with better drying performance.
aus Fault, what to do? Fault Reason Solution Food remnants on the utensils. Utensils placed too closely together, utensils basket overfilled. Arrange utensils with adequate clearance between them ensuring that the spray jets can reach the surface of the utensils. Prevent contact points. Spray arm rotation obstructed. Arrange utensils so that the spray arm can rotate without obstruction. Spray arm nozzles are blocked. Clean the spray arm nozzles.
Fault, what to do? aus Fault Reason Solution Water stains on plastic parts. Droplet formation on plastic surface is physically unavoidable. After drying, water stains are visible. Use a more intensive programme (more water changes). Arrange utensils in a sloping position. Use rinse aid. Washable or water-soluble Detergent substances are Change detergent brand. coatings in the container or deposited. These coatings cannot Clean appliance mechanically. on the door.
aus Fault, what to do? Fault Reason Solution Plastic parts discoloured. Rinsing temperature too low. Select programme with higher rinsing temperature. Utensils precleaned too intensely; Do not prerinse utensils.Remove only sensors therefore decide on large food remnants. weak programme sequence. Stubborn soiling cannot be completely removed. Removable streaks on glasses, glasses with metallic appearance and cutlery. Too much rinse aid. Set rinse aid amount to lower setting setting.
Fault, what to do? aus Fault Reason Solution The door is difficult to open. Child-proof lock is activated. Deactivate child-proof lock.(See instructions for use at the back) Door cannot be closed. Door lock has been activated. Close door with increased force. Door cannot be closed due to installation. Check appliance installation: Door or attached parts must close without obstruction. Cover on the detergent dispenser cannot be closed. Detergent dispenser or cover Remove detergent residue.
aus Customer service 4 Customer service If you are unable to rectify the fault, please contact your customer service. We will always find an appropriate solution in order to avoid unnecessary visits by engineers. Contact information for your nearest customer service can be found on the back of these instructions for use or on the enclosed customer service list. When calling, please state the appliance number (E-Nr.
Installation and connection aus Delivery Installation Your dishwasher has been checked thoroughly in the factoryto ensurethatitis in working order. This may cause small water stains. These will disappear after the first wash cycle. The required installation dimensions can be found in the installation instructions. Level the appliance with the aid of the height-adjustable feet. Ensure that the appliance is situated securely on the floor.
aus Installation and connection Drinking water connection 1. Fasten the drinking water connection to the tap according to the installation instructions using the enclosed parts. Ensure that the drinking water connection is not kinked, crushed or twisted. 2. When replacing the appliance, always use a new water supply hose. Water pressure: at least 0.05 MPa (0.5 bar), maximum 1 MPa (10 bar). At a higher water pressure: connect pressure-reducing valve ahead.
Installation and connection aus Removal Protection against frost Also observe the sequence of worksteps here. 1. Disconnect the appliance from the power supply. 2. Turn off the tap. 3. Undo the waste water and drinking water connection. 4. Loosen fastening screws for the furniture parts. 5. If fitted, remove the base panel. 6. Pull out the appliance, carefully pulling the hose behind.
&RQVWUXFWD 1HII 9HUWULHEV *PE+ &DUO :HU\ 6WUDH ' 0QFKHQ $48$ 6723 JXDUDQWHH GRHV QRW DSSO\ WR DSSOLDQFHV ZLWKRXW $TXD 6WRS ,Q DGGLWLRQ WR ZDUUDQW\ FODLPV DJDLQVW WKH VHOOHU EDVHG RQ WKH SXUFKDVH FRQWUDFW DQG LQ DGGLWLRQ WR RXU DSSOLDQFH ZDUUDQW\ ZH ZLOO SD\ GDPDJHV XQGHU WKH IROORZLQJ FRQGLWLRQV ,I RXU $TXD 6WRS V\VWHP LV GHIHFWLYH DQG FDXVHV ZDWHU GDPDJH ZH ZLOO PDNH JRRG WKH GDPDJH IRU SULYDWH XVHUV 7R HQVXUH ZDWHU GDPDJH SURWHFWLRQ WKH DSSOLDQFH PXVW EH FRQQHFWHG WR WKH SRZH
