Installation Instructions

ManualsBrandsNeewer ManualsElectronicsRGB LED Photography Video Light with Bluetooth

Table Of Contents

OﬃcialHomePage

www.neewer.com

Theactualproductmaydifferfromthepictureinthismanualincolorandappearance.

SmartMetalLEDLight

InstructionManual

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between theequipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

IC warning statements:

- English:

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause interference,

and (2) This device must accept any interference, including interference that may cause undesired

operation of the device.

- French:

Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest

susceptible d'encompromettre le fonctionnement.

Summary of content (15 pages)

PAGE 1
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 2
Table of Contents 1.Package Contents 1 2.Applications 2 3.Functions 3 4.Power Supply 7 5.Modes 8 6.Quick-start Guidance 10 7.Control the LED Light via the App 11 the basic operation procedures and functions of the light. 8.Delete or Disconnect a Device 14 the application environment and safety use of the light. 9.Installation Procedures 15 10.Safety Notes 19 11.Caution 20 12.Product Parameters 20 13.Warranty Policy 21 14.Trademark and Statement 22 15.
PAGE 3
1.Package Contents 2.Applications Upon receiving the package, please check whether all the items are included. If there is any missing or broken items, please contact Neewer Customer Service (support@neewer.com).
PAGE 4
3.Functions Control Panel Battery Compartment Heat Dissipation Plate NEEWER NEEWER Screen OFF Left Knob Mode/Channel Button MODE MIN Right Knob HSI MAX MIN BRR DC12-15V MAX Power Port Power Switch Angel Adjustment Knob Display Color Temperature Tripod Securing Knob Scene Standby Mode Hue, Saturation and Intensity Bluetooth Channel Intensity Mode/Channel Button Quickly press the Mode/Channel Button to switch from CCT, HIS, to Scene mode.
PAGE 5
3.Functions Control Panel Battery Compartment Heat Dissipation Plate NEEWER NEEWER Screen OFF Left Knob Mode/Channel Button MODE MIN Right Knob HSI MAX MIN BRR DC12-15V MAX Power Port Power Switch Angel Adjustment Knob Display Color Temperature Tripod Securing Knob Scene Standby Mode Hue, Saturation and Intensity Bluetooth Channel Intensity Mode/Channel Button Quickly press the Mode/Channel Button to switch from CCT, HIS, to Scene mode.
PAGE 6
NEEWER App Guide Available Scenes are as follows: 8:00 RGB Light A R100 B C Scene G100 A B C Squad Car A B C Ambulance A B C Fire Engine A B C Party A B C Firework 1 A B C Firework 2 A B C Lightning 1 A B C Lightning 2 A B C Screen Color Disk B100 360 100 100 5600k ALL 8 7 Color Temperature 6 Hue 5 4 Saturation 3 Intensity 2 Channel 1 Hues Power Button Saturation BRR 1 CCT CH.
PAGE 7
5.Modes 4.Power Supply Channel Via DC adapter NEEWER NEEWER OFF OFF MODE MIN MODE MIN HSI MAX MIN BRR HSI MAX MIN BRR DC12-15V MAX Power on the light, then long press the “MODE/CH.” button for three seconds until the symbol“ CH.0” shows ﬂickering on the display. Next, turn the Left or Right Knob to switch channels between 0 and 8. DC12-15V MAX Note: Channel number“ 0” on the light serves as backup channel and will only work when the "ALL" button is clicked in the App.
PAGE 8
6.Quick-start Guidance Hue Please scan the QR code on the left to download and install the NEEWER app on your smart phone with Android or iOS system. NEEWER Android OFF MODE MIN HSI MAX MIN BRR DC12-15V MAX IOS Quick press the“ MODE/CH.” button until the symbol“ HST” shows on the display. Next, rotate the Left Knob to adjust the hue angle of the light(0°~360°). Under the HST mode, quick press the Left Knob to switch between the hue and saturation settings.
PAGE 9
6.Quick-start Guidance Hue Please scan the QR code on the left to download and install the NEEWER app on your smart phone with Android or iOS system. NEEWER Android OFF MODE MIN HSI MAX MIN BRR DC12-15V MAX IOS Quick press the“ MODE/CH.” button until the symbol“ HST” shows on the display. Next, rotate the Left Knob to adjust the hue angle of the light(0°~360°). Under the HST mode, quick press the Left Knob to switch between the hue and saturation settings.
PAGE 10
7.Control the LED Light via the App Demo: control multiple LED lights respectively Demo: control a single LED light NEEWER NEEWER MODE MIN HSI MAX MIN BRR MODE DC12-15V MAX MIN Power on the light, then press the“ MODE/CH.” button for 2 seconds until the symbol“ CH.0” shows ﬂickering on the display. HSI MAX MIN BRR DC12-15V MAX Set the channel of LED light A as any number from 1 to 8 (demo: "1"). When“ CH.
PAGE 11
8.Delete or Disconnect a Device Demo: control multiple LED lights altogether Disconnect a device NEEWER-SNL*** Set the channel of LED light A as any number from 1 to 8 (demo: "3"). Set the channel of LED light B as any number from 1 to 8 (demo: "6"). Set the channel of LED light C as any number from 1 to 8 (demo: "8").
PAGE 12
9.Installation Procedures Install the barndoor Install the diffuser 1 Please refer to the diagram to locate the following filter parts: 2 1 2 1 Screw 2 Screw Nut 1 Diffuser Clasp Place the four screw nuts 2 into the screw holes of the light body and turn them clockwise one by one until they are tight. 2 Diffuser With the light facing toward you, insert the diffuser into light body from its right side 2 until it reaches the metal slot on the left.
PAGE 13
NEEWER NEEWER NEEWER Insert the four screws into 2 the screw nuts and twist 1 clockwise to tighten them one by one. Close up the barndoors on the four sides. Turn the securing knob on the both sides of the light until the light body is loosened. Adjust the light body to your desired position. Connect the light to a stand and adjust the barndoor NEEWER NE Turn the securing knob of the stand counterclockwise until it is loosened.
PAGE 14
10.Safety Notes 11.Caution Please do not stare at the light directly while it is in use, or there might be risk of visual impairment. Please do not cover the heat dissipation holes on the product with cloth or other items, or there might be risk of product damage. Please do not touch the light with wet hands in case of safety hazard. Please do not dismantle or modify the circuit of the item (unless professionally certified). Please do not expose the item to the sun for a long time.
PAGE 15
13.Warranty Policy Warranty Period 14.Trademark and Statement NEEWER® is a registered trademark of NEEWER® Technology Company, Ltd, which is protected by law. NEEWER® company reserves all rights for this trademark. You can register your NEEWER® product for its free 1-year warranty at www.neewer.com.Thanks！ Your questions or suggestion are highly valued and appreciated. Please feel free to contact us, and we will do our best to fully satisfy you.E-MAIL:support@neewer.