User Guide

Page of 1 3 Commercial guidelines Doorframe i7

Commercial guidelines Doorframe i7

The Doorframe i7 is a special product, please follow these commercial guidelines. By doubt contact

The lead time of this product is on request. Informlissa.kooijman@nedap.com (mailto:lissa.kooijman@nedap.com)

yourself in advance because the lead time might be longer than expected.

The best RF system you never see! The Doorframe i7 is a concealed solution especially designed for

narrow entrances and entrances where it is not preferred or practical to place gates on the floor

Create more sales space! Because the detection field is closer to the exit, this also creates less false

alarms by secured items moving in store

Note: be aware that when there is an alarm, people causing the alarm will already be outside of the

store (because it is positioned so close to the exit)

Doorframe i7 has Standard integrated Customer counting

Doorframe i7 is part of !Sense, Intelligent Loss Prevention.

The Doorframe i7 has the option for a real-time !Sense Dashboard. A local API for integrations. Nedap

Retail Analytics, to focus on increasing dwell time, managing staff efficiently, know store’s peak hours

etc. Remote firmware upgrades, so the system can improve over time. Device Management for quick

service to continuously keep shrinkage low

Best homogeneous RF 8.2 MHz rotation detection field

The preferred installation for best performance is to use 2 x i7 in ‘Focussed field’. This means that there

is no detection on the outsides. Focussed field is an unique Nedap !Sense software setting that no

competitor has

PAGE 1
Commercial guidelines Doorframe i7 The Doorframe i7 is a special product, please follow these commercial guidelines. By doubt contact lissa.kooijman@nedap.com (mailto:lissa.kooijman@nedap.com) The lead time of this product is on request. Inform yourself in advance because the lead time might be longer than expected.
PAGE 2
The preferred installation is 2 times an i7 in focussed field. The performance in focused field, with a distance between the i7 of 2 meter [6,6 feet] gives a detection chance of 90% or higher can be reached with a NT4040 label. When the distance is 2,20 meter [7 feet] a detection chance of 75% or higher can be reached with a NT4040 label It is possible to place the Doorframe i7 in ‘Full field’ and use only 1 x i7 in the middle of an entrance.
PAGE 3
The Doorframe i7 should be placed around 20/30 cm [8/12 in] from the floor The Doorframe i7 can be mounted to the wall or be placed on a Floor mount column. The Floor mount column is recommended for best performance The material of the wall or Frame of the retailer can strongly influence the RF performance. Especially when the frame is made of metal. Therefore the installation material includes distance holders (2,5 cm [0,9 in] from the frame) Optional: Metal Detection.