Users Manual

TÜV Rheinland Nederland B.V.
Eiberkamp 10
9351VT Leek
The Netherlands
.
® TÜV, TUEV and TUV are registered trademarks. Utilisation and application requires prior approval.
To whom it may concern,
On behalf of our customer Nedap N.V., we hereby declare the antenna of the following
device:
FCC ID: CGDVP1006B
IC: 1444A-VP1006B
Manufacturer: Nedap N.V.
Brand: Nedap
Model: VP1006B
The VP1006B may be used with the following magnetic loop antennas:
Single Loop Walk Through, Single Loop Walk Over, VP6011, VP6012, VP6030,
VP6040, VP6041, VP6042 and VP6050. All branded Nedap.
Antenna
dimensions (cm)
Antenna Single Loop Walk Through
100 by 195-210
Antenna Single Loop Walk Over
80 by 120
Antenna VP6011
24 by 12,5
Antenna VP6012
24 by 12,5
Antenna for VP6030
28 by 39
Antenna VP6040
2 times 64,6 x 30,3 and 64,6 by 59,2
Antenna VP6041
2 times 47,6 by 38,8
Antenna VP6042
2 times 47,6 by 38,8
Antenna VP6050
47,6 by 117,6
Antenna VP6041 and VP6042 are identical. However, model VP6041 is
adjusted for environments with lots of steel for short distances. The VP6042 is
adjusted for longer distances (1 m) recognition.
Best regards,
TÜV Rheinland Nederland B.V.
R. van der Meer
Test Engineer