Quick Start Manual

SmartTag Ear / Quick start manual

5288215 / Version 00.001 / November 2020 / EN

Dairy Farming

Quick start manual

SmartTag Ear

How to attach the SmartTag Ear

Put the SmartTag Ear and male part of the tag into the plier and attach to the cow's ear. Make sure the SmartTag Ear is

in the correct position in the ear:

• The SmartTag Ear should be on the front side of the ear.

• The Tag should be in the middle of the ear (not in the outside of the ear, in the auricle itself, or into any of the ear's

nerves).

• When there is already a tag in the ear, there should be no contact in any way between the tag and the SmartTag

Ear.

PAGE 1
Quick start manual SmartTag Ear How to attach the SmartTag Ear Put the SmartTag Ear and male part of the tag into the plier and attach to the cow's ear. Make sure the SmartTag Ear is in the correct position in the ear: • The SmartTag Ear should be on the front side of the ear. • The Tag should be in the middle of the ear (not in the outside of the ear, in the auricle itself, or into any of the ear's nerves).
PAGE 2
Figure 1: Correct positions Figure 2: Wrong positions Additional information SmartTag Ear / Quick start manual 5288215 / Version 00.
PAGE 3
Technical specifications SmartTag Ear Item Speciﬁcation Electrical supply Supply voltage Lithium coin cell 3,0 V (internal) Antenna Operating frequency (center) 433,3 - 434,5 MHz Max. transmit power <1mW E.r.p.
PAGE 4
CE Hereby NEDAP N.V. declares that the subject equipment is in compliance with the directives 2014/53/ EU (Radio Equipment Directive) and 2011/65/EU (Restriction of the use of certain hazardous substances). The full text of the EU declaration of conformity is available at our Business Portal: http://www.nedap.com/ livestockmanagement-portal.