User's Guide
© 2020 Nectar, Inc. All rights reserved • 1
Nectar Smart Caps
Before using smart caps, review the User Guide at
https://help.getnectar.com/hc/en-
us/categories/360002037854-Devices-settings
Description
Nectar Smart Caps are designed to measure
container levels using ultrasound and broadcast a
BLE packet containing the measurement to the
Nectar Base Station.
They have a BLE broadcasting range of 20–30 feet
in radius.
Features
● Pourer dimensions: 3.6 × 3.6 × 12cm
● Stopper dimensions: 3.6 × 3.6 × 5.2cm
● Pourer weight: 52g
● Stopper weight: 50g
● Power: Battery
● Radios: BLE 4.0
● Activation button
Installation
⚠
Configure your base station(s) before
activating your smart cap(s)
1. Download and install the Nectar app to your
mobile device
2. Place the smart cap on its assigned
products (check the printed label on the
back of each cap)
3. Press and hold the Nectar logo for 3
seconds to turn on and activate each cap
Note: It may take up to 2 minutes for the first
measurement to appear in the Nectar mobile app.
Battery
Do not attempt to replace the battery yourself—you
may damage the battery, which could cause
overheating, fire, and injury. The battery in the
smart cap should only be serviced or recycled by
Nectar, and must be recycled or disposed of
separately from household waste. Dispose of