Bedienungsanleitung Operating Instructions Notice d’utilisation DT 150 Studiokopfhörer Professional Headphone Casque de Studio DT 190 Hör-Sprechgarnitur Headset Micro-casque
INHALT / CONTENTS / SOMMAIRE BEDIENUNGSANLEITUNG DT 150 - DT 190 Charakteristik . . . Anschluss . . . . . . . Anwendung. . . . . Pflege . . . . . . . . . Sicherheit. . . . . . . Ausführungen . . . Ersatzteile . . . . . . Zubehör . . . . . . . . Technische Daten. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEDIENUNGSANLEITUNG DT 150 - DT 190 Sie haben sich für den dynamischen Studiokopfhörer DT 150 bzw. für die dynamische Hör-Sprechgarnitur DT 190 von beyerdynamic entschieden. Wir danken für Ihr Vertrauen. Äußerste Präzision bei der Fertigung und eine strenge Qualitätskontrolle garantieren die Zuverlässigkeit und den hohen Komfort, die Sie von beyerdynamic-Produkten erwarten dürfen. Charakteristik DT 150 Der geschlossene Studiohörer DT 150 bietet eine gute Isolation von Außengeräuschen.
vom Fachmann angelötet werden. Bei allen anderen Kabeln mit freien Enden können die Stecker direkt an das Kabel gelötet werden (Anschlussbelegung siehe „Schaltbilder“, Seite 8-9). Anwendung Schließen Sie den Studiohörer DT 150 bzw. die HörSprechgarnitur DT 190 an hochwertige Geräte mit der entsprechenden Impedanz und Belastbarkeit an. Genaue Informationen finden Sie in den „Technischen Daten“. Der verstellbare Kopfbügel kann jeder Kopfgröße angepasst werden.
Wird der Kopfhörer im Stereobetrieb benutzt, sollten im Stecker die Anschlussdrähte für links und rechts getauscht werden, d.h. braun/orange (links) gegen rot/blau (rechts). Außerdem können die Deckel für L + R Kennzeichnung getauscht werden. Das Mikrofon sollten Sie im Abstand von 2 3 cm neben dem Mundwinkel plazieren. So werden Poppgeräusche minimiert. Pflege Aus hygenischen Gründen sollten Sie den Kopfhörer von Zeit zu Zeit mit einem weichen, feuchten Tuch reinigen.
Ausführungen DT 150 DT 190 Studio-Kopfhörer, 250 Ω, schwarz, mit Kabel K 100.07 (Stereoklinke 6,35 mm), Länge 3 m, steckbar . . . . . . . . . Best.-Nr. 455.970 Hör-Sprechgarnitur, 200/250 Ω, schwarz, mit Kabel K 190.00 (freie Enden), Länge 1,5 m . . . . . . . . . . . . . . . Best.-Nr. 455.830 Ersatzteile für DT 150 - DT 190 BN 59-58/A Kopfpolster. . . . . . . . . . . . . . . . Best.-Nr. 377.163 EDT 150 S Ohrmuschelsatz, Softskin . . . . . Best.-Nr. 431.
K 190.40 - 1,5 M Anschlusskabel, 1,5 m, mit 3-pol. XLR-Stecker und 6,35 mm-Stereo-Klinke . . . . . . K 190.40 - 3,0 M Anschlusskabel, 3 m, mit 3-pol. XLR-Stecker und 6,35 mm-Stereo-Klinke . . . . . . K 190.41 - 1,5 M Anschlusskabel, 1,5 m, mit 5-pol. XLR-Stecker . . . . . . WK 190.00 Wendel-Anschlusskabel, 3 m, mit freien Enden . . . . . . . . . . . Best.-Nr. 445.894 . Best.-Nr. 446.750 . Best.-Nr. 445.312 . Best.-Nr. 448.176 Technische Daten DT 150 - DT 190 Hörer Wandlerprinzip . . . . . . . .
DT 190 Mikrofon Wandlerprinzip . . . . . . Übertragungsbereich . . Richtcharakteristik . . . . Störschallauslöschung . Ausgangsspannung bei Besprechung aus 5 cm Entfernung . . . . . Nennimpedanz. . . . . . . Gewicht . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . dynamisch 40 - 12.000 Hz Hyperniere 30 dB . . . . . 3 mV . . . . . ca. 200 Ω . . . . .
OPERATING INSTRUCTIONS DT 150 - DT 190 Thank you for selecting the DT 150 professional studio headphone or the DT 190 professional headset. They have been made in Germany from high-grade materials and assembled under stringent quality and performance tests to provide you with a professional communications tool. Please take some time to read through this instruction sheet to give you an idea of the design criterion and some information on connection, use and maintenance.
to fit crimped brass sleeves to the conductors and then solder the sleeve to the connector. If direct solder connections have to be made, use a high-temperature solder-pot to tin the tinsel conductors before making the solder joint to the connector, but be careful that the nylon thread does not melt. Direct solder connections can be made to all other cables with free ends (for cable connection refer to “Wiring Diagram” pages 14-15). On request, the necessary plugs can be mounted at the factory.
The microphone should be positioned to the side of the mouth, about 20 - 30 mm forward. This will keep it within the direct sound path but out of the breath stream, therefore minimising any ‘pop’ sounds. Of course every user will be different and a degree of experimentation will be necessary to achieve the preferred result. Professional users should note that it is recommended practise that headsets are issued on an individual user basis to preclude any possible health risks.
Models DT 150 DT 190 Studio headphone, 250 Ω, black, with K 100.07 cable (stereo jack 6.35 mm), 3 m long, plug-in type . . . . . . . Order # 455.970 Headset, 200/250 Ω, black, with bare-ended K 190.00 cable, 1.5 m long . . . . . . . . . . . . . . . . Order # 455.830 Spares for DT 150 - DT 190 BN 59-58/A Hearband pad. . . . . . . . . . . . . . Order # 377.163 EDT 150 S Ear cushions pair, soft PVC . . . . Order # 431.532 Supplied Accessories BN 56-79/A Pop-shield (for DT 190). . . . . . . Order # 108.
K 190.40 - 1,5 M Connecting cable, 1.5 m, with 3-pin. XLR plug and 1/4" jack plug . . . . . . . . . . . . . K 190.40 - 3,0 M Connecting cable, 3 m, with 3-pin. XLR plug and 1/4" jack plug . . . . . . . . . . . . . K 190.41 - 1,5 M Connecting cable, 1.5 m, with 5-pin. XLR plug. . . . . . . . WK 190.00 Coiled connecting cable, 3 m, free ends. . . . . . . . . . . . . . . . . . Order # 445.894 . Order # 446.750 . Order # 445.312 . Order # 448.
DT 190 Microphone Transducer type . . . . . . . . . . Frequency response . . . . . . . Polar pattern . . . . . . . . . . . . Interference discharging . . . Output voltage at a distance of 5 cm . . . . . . . . . . Nominal output impedance . Weight . . . . . . . . . . . . . . . . . . . . . dynamic 40 - 12.000 Hz hypercardioid 30 dB . 3 mV . approx. 200 Ω .
NOTICE D’UTILISATION DT 150 - DT 190 Nous vous félicitons pour l’achat de ce casque / microcasque professionnel. Pour exploiter au mieux ses possibilités, nous vous conseillons de lire attentivement cette note explicative. Description DT 150 Casque de studio professionnel de type fermé, assurant une parfaite isolation contre les bruits ambiants. Il est livré sans câble. (La liste des câbles disponibles figure ci-après dans la rubrique accessoires).
Le microphone des micro-casques est d’origine monté côté gauche. En cas de nécessité vous pouvez modifier ce montage pour avoir le micro côté droit. DT 190 1. Soulevez le couvercle avec un petit tournevis. 2. Enlevez la vis 3. Retournez le disque 180°. La marque du disque est orienté vers le haut du bras de support. 4. Resserrez la vis et encliquetez le couvercle sur l’articulation.
Les mousses de protection «POP» des micros se lavent simplement à l’eau tiède. Évitez de les replacer sur le microphone avant qu’elles ne soient totalement sèches. Les oreillettes, le bandeau de l’arceau serre-tête et les mousses «POP» étant soumis à une usure naturelle provoquée par la transpiration, la séborrhée et la salive, il est indispensable de les changer régulièrement. La construction modulaire de cette série de casques et microcasques permet un service après-vente simple et rapide.
Accessoires fournis BN 56-79/A Mousse protection «POP» (pour DT 190) . . . . . . . . . . . . . . . . Art. N° 108.677 Accessoires en option pour DT 150 K 100.00 - 3,0 M Câble droit, 3 m, extrémités libres . . . . . . . . . . . . Art. K 100.07 - 3,0 M Similaire au K 100.00 mais avec fiche Jack Stéréo 6,35 mm . . . . Art. WK 100.00 Câble torsadé, 3 m, extrémités libres . . . . . . . . . . . . Art. WK 100.07 Similaire au WK 100.00 mais avec fiche Jack Stéréo 6,35 mm . . . . Art. N° 101.710 N° 101.753 N° 101.
WK 190.00 Câble torsadé, 3 m, extrémités libres . . . . . . . . . . . . Art. N° 448.176 Spécifications techniques DT 150 - DT 190 Écouteurs Type de transducteur . . . . . . Fonctionnement acoustique Bande passante . . . . . . . . . . Impédance nominale . . . . . . Pression sonore nominale à 1 kHz . . . . . . . . . . . . . . . . . . . . . dynamique fermé 5 à 30.000 Hz 250 Ω . 97 dB SPL à 1 mW = 0,5 V à 250 Ω Charge nominale efficace . . . 100 mW 117 dB = 5 V à 250 Ω Atténuation du bruit ambiant . . . . .
DT 190 Microphone Type de transducteur . . . Bande passante . . . . . . . Directivité. . . . . . . . . . . . Supression de bruit . . . . Voltage de sortie à 5 cm Impédance de sortie nominale . . . . . . . . . . . . Poids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . dynamique 40 - 12.000 Hz hypercardioïde 30 dB 3 mV . . . . env. 200 Ω . . . .
beyerdynamic U.K. Ltd. 17 Albert Drive Burgess Hill RH15 9TN Tel. +44 (0)1444 / 258258 Fax +44 (0)1444 / 258444 sales@beyerdynamic.co.uk www.beyerdynamic.co.uk beyerdynamic Inc. USA 56 Central Ave. Farmingdale, NY 11735 Tel. +1 (631) 293-3200 Fax +1 (631) 293-3288 salesUSA@beyerdynamic.com www.beyerdynamic.com DEF 6/BA DT150_DT190 (01.06)/382.264/Hoh. · Änderungen und Irrtümer vorbehalten · Subject to change without notice · Sous réserve de modifications · Printed in Germany. beyerdynamic GmbH & Co.