LCD Projector MT1065/MT1060/MT860 User’s Manual
LIMITED WARRANTY GARANZIA LIMITATA Except as specified below, the warranty that may be provided by the dealer covers all defects in material or workmanship in this product. The following are not covered by the warranty: A parte la specificazione seguente, la graanzia che potrebbe essere fornita dal rivenditore copre tutti i difetti di materiali o nella lavorazione in questo prodotto. I seguenti non sono coperti dalla garanzia : 1.
LIMITED WARRANTY (USA and Canada only) NEC SOLUTIONS’ PROJECTOR PRODUCTS HOW YOU CAN GET WARRANTY SERVICE NEC Solutions (America), Inc. (hereafter NEC Solutions) warrants this product to be free from defects in material and workmanship under the following terms. 1. To obtain service on your product, consult the dealer from whom you purchased the product. 2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage.
DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: Address: Tel. No.: NEC Solutions (America), Inc. 1250 N.
Portable Projector MT1065/MT1060/MT860 English User’s Manual Deutsch Français Italiano Español Svenska
Important Information RF Interference Safety Cautions Precautions WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Soluctions (America), Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Fire and Shock Precautions What's in the Box? 1. Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 3 inches (10 cm) of space between your projector and a wall. Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your MT1065/MT1060/MT860 Projector. 2.
TABLE OF CONTENTS Selecting Video Filter Level .................................................................................... E-39 Selecting Noise Reduction Level ............................................................................ E-39 Signal Type ............................................................................................................ E-39 Picture Management ..................................................................................................
INTRODUCTION Introduction to the Projector This section introduces you to your new MT1065/MT1060/MT860 Projector and describes the features and controls. Congratulations on Your Purchase of The MT1065/ MT1060/MT860 Projector The MT1065/MT1060/MT860 is one of the very best projectors available today.
Part Names of the Projector Remote Sensor (See page E-11) Controls (See page E-7) Image Sensor For Auto Focus and Auto Wall Color Correction. (See page E-47) NOTE: The Auto Focus and the Auto Wall Color Correction are not available on MT860.
. SELECT (+) (–) / Volume Buttons : Use these buttons to select the menu of the item you wish to adjust. When no menus appear, these buttons work as a volume control. : Use these buttons to change the level of a selected menu item. A press of the button executes the selection. When the menus or the Viewer tool bar is not displayed, these buttons can be used to select a slide, or to move the cursor in Folder List or Slide List.
5. S-VIDEO IN Connector (Mini DIN 4 Pin) Here is where you connect the S-Video input from an external source like a VCR. Terminal Panel Features 8 9 10 13 12 NOTE: S-Video provides more vivid color and higher resolution than the traditional composite video format. 3 S-VIDEO AUDIO Input Jacks R/L (RCA) These are your left and right channel audio inputs for stereo sound from an S-Video source. 2 1 5 4 7 6.
9. VIEWER Button Press this button to select the Viewer source. Part Names of the Remote Control NOTE: If you are using a Macintosh computer, you can click either the right-click or left-click button to activate the mouse. 11. LASER Button Press and hold this button to activate the laser pointer. When lit, you can use the laser to draw your audience's attention to a red dot that you can place on any object. CT LE SE ER LAS VIE WE R AU RG B TO AD J. PO WE R VID EO 2.
4 6 MENU 5 8 9 11 SELECT 13 ON OFF POWER RGB VIDEO 7 10 VIEWER LASER AUTO ADJ. 12 14 EN TE CAN R CE L 16 PJ 21 17 20 23 24 25 ASPECT FREEZE 3D REFORM HELP POINTER PIC-MUTE VOLUME MAGNIFY 15 SLIDE 18 19 22 27 ZOOM 26 FOCUS FOLDER SLIDE LIST 28 29 22. PICTURE MUTE Button This button turns off the image and sound for a short period of time. Press again to restore the image and sound.
Battery Installation Remote Control Precautions 1. Press firmly and slide the battery cover off. • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • If you will not be using the remote control for a long time, remove the batteries. • Do not place the batteries upside down. • Do not use new and old batteries together, or use different types of batteries together 2. Remove both old batteries and install new ones (AA).
INSTALLATION AND CONNECTIONS This section describes how to set up your projector and how to connect video and audio sources. Your projector is simple to set up and use. But before you get started, you must first: 1 z Set up a screen and the projector. x Connect your computer or video equipment to the projector. See page E-14 – 17. c Connect the supplied power cable. See page E-17. 2 NOTE: Ensure that the power cable and any other cables are disconnected before moving the projector.
Throw Distance and Screen Size The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distance Chart Screen Width Screen Diagonal Screen Height Screen center (B) Screen Bottom Lens Center Throw Angle (움) Throw Distance (C) B = Vertical distance between lens center and screen center C = Throw distance α = Throw angle NOTE: Distances may vary +/-5%.
Making Connections NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector. * If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.
To connect SCART output (RGB) Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection. NOTE: • Audio signal is not available for this connection. • The RGB IN 2 connector does not support Plug & Play. 1. Turn off the power to the projector and your video equipment. 2.
Connecting Your DVD Player RGB 2 IN Optional 15-pin-to-RCA (female)⳯3 cable (ADP-CV1) RGB 1 IN RCA(female)-to-BNC(male) adapter (not supplied) Component video RCA⳯3 cable (not supplied) Audio Equipment DVD player AUDIO IN AUDIO OUT L R L Component Y Cb R Cr Audio cable (not supplied) For a DVD player without component video (Y,Cb,Cr) output, use common RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector.
Connecting Your VCR or Laser Disc Player VIDEO IN S-VIDEO IN Video cable (not supplied) S-video cable (not supplied) Audio equipment AUDIO IN L R VCR/ Laser disc player AUDIO OUT L R VIDEO OUT S-VIDEO OUT Audio cable (not supplied) Use common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector. To make these connections, simply: 1. Turn off the power to the projector and VCR, laser disc player or document camera.
PROJECTING AN IMAGE (BASIC OPERATION) This section describes how to turn on the projector and to project a picture onto the screen. 2. Press the ENTER button to execute the selection. MENU Turning on the Projector NOTE: • When plugging in or unplugging the supplied power cable, make sure that the main power switch is pushed to the off[O] position. Failure to do so may cause damage to the projector.
Selecting a Source Adjusting the Picture Size and Position Selecting the computer or video source Place your projector on a flat level surface and ensure that the projector is square to the screen. Using the Remote Control Lift the front edge of the projector to center the image vertically. ON OFF POWER VIDEO RGB AUTO ADJ. VIEWER LASER Press any one of the RGB, VIDEO or VIEWER buttons.
CAUTION: Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector.
4. Use the SELECT button to select one icon which points in the direction you wish to move the projected image frame. 6. To complete the procedure, right-click anywhere on the screen. The confirmation screen is displayed. 7. Left-click on "OK". This completes the Cornerstone adjustment. * To return the Cornerstone adjustment to the default settings, leftclick on "Reset" in Step 7. You can save your Cornerstone changes. The changes are saved when you turn off the projector.
NOTE: During 3D Reform adjustment, "Aspect Ratio" and "Screen" may not be available. Should this happen, first reset the 3D Reform data and then do each setting. Second repeat the 3D Reform adjustment. Changing Aspect Ratio and/ or Screen setting can limit 3D Reform in its adjustable range. Turning Up or Down Volume Sound level from the speaker and the AUDIO OUT jack (RCA) on the projector can be adjusted. The adjustable ranges for 3D Reform are as follows: Horizontal ........... Max ±35° approx.
Setting the function switch There are two switches on the bottom of the battery case: an applicable projector selector switch (1) and laser enable/disable switch (2). Check the projector being used and decide whether to enable or disable laser, then set these switches as necessary using the tip of a thin ball-point pen. On this model, an applicable projector selector switch (1) is not used.
CONVENIENT FEATURES When using the USB Port Using the Remote Mouse Function The built-in remote mouse function enables you to operate your computer's mouse functions from the remote control (Computer mode). It is a great convenience for clicking through your computer-generated presentations. To return to the projector operation mode (Projector mode), press the PJ button (lit red).
Turning Off the Image and Sound Enlarging and Moving a Picture Press the Picture Mute button to turn off the image and sound for a short period of time. Press again to restore the image and sound. You can enlarge the area you want up to 400 percent. To do so: PIC-MUTE 1. Press the Pointer button to display the pointer. POINTER Freezing a Picture Press the Freeze button to freeze a picture. Press again to resume motion. FREEZE 2. Move the pointer to the area you want to enlarge.
Using the USB Mouse Using the USB HUB Function Using the supplied USB mouse gives you a smooth operation. A commercially available USB mouse can be also used. When using the projector with a PC via the supplied USB cable, both the USB port(type A) on the projector can be connected to a USB-supported scanner or other USB-supported device.
Changing Background Logo You can change the default background logo using the PC Card Files feature. NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP are not available. 1. From the menu, select [Tools] → [PC Card Files] to display a list of all the files stored in the PC card so that you can select a file you want to use as a background logo.
USING THE VIEWER NOTE: • To use the Viewer, first you need to create presentation materials on your PC using the Dynamic Image Utility 2.0 contained on the supplied NEC Projector User Supportware CD-ROM. For installation, see the printed NEC Software Utility Installation Guide. For creating presentation materials, see the Slide show function on the on-line manual of the Dynamic Image Utility 2.0. • Selecting Viewer sets the audio input for DVI input.
Operating the Viewer Function from the Projector (playback) This section describes the operation for showing slides of presentation documents created using the Viewer function with the projector. It is also possible to make slides directly from the images projected with the projector. When the tool bar is not displayed: Press the FOLDER LIST button or the SLIDE LIST button on the remote control to display folders or from a PC card in the projector's PC Card slot. FOLDER Projecting slides (Viewer) 1.
NOTE: You can also use the and button on the remote control to select folders or slides. If you use the and button on the remote control for Viewer operation, press the PJ button to switch to the Projector mode and the PJ button lights red. Works as the Select button on the projector. EN 1. Project the image you wish to store on the projector. 2. Select the "Capture" from the Tools menu. L SELECT Preparations: Insert the PC card into the card slot.
Deleting Captured Images Using the Delete button on the tool bar for Viewer can delete captured images. Prev Play Jump Delete Drive Drag Next Stop Select Setup View To delete captured images: 1. Select Viewer and display a folder list of captured images. 2. Use button to select the Capture folder [Cap] in the right bottom of the screen. 3. Press the MENU button to display the tool bar. 4. Use the or button to select the Delete icon and press the ENTER button or click with a mouse button.
USING ON-SCREEN MENU The default Custom Menu items are: Basic Menu Operation Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or projector cabinet to display the Basic, Advanced or Custom Menu. NOTE: When using a USB mouse, click the mouse button to display the menu. For other operations, do the same way as you use your PC mouse. 2.
Menu tree Advanced Menu RGB1 Source Select Picture RGB2 Video Sound S-Video Image Options DVI (DIGITAL)* User1 Picture Management Projector Options Viewer LAN User2 User3 Tools more Entry List Help Factory Default Picture Brightness, Contrast, Color, Hue, Sharpness Volume, Bass, Treble Aspect Ratio Blanking Position/Clock Resolution Overscan Video Filter Noise Reduction 4:3, Letterbox, Wide Screen, Crop / 4:3 Window, Letterbox, Wide Screen, 4:3 Fill Top, Bottom, Left, Right Horizontal, Ve
Advanced Menu Source Select Picture Sound Image Options Picture Management Projector Options Tools Help Factory Default Cornerstone Keystone Off, User 1, User 2, User 3, User 4 (Auto Adjust Button) 3D Reform Wall Color Correction Menu Setup Lamp Setting Screen Auto Functions* LAN Mode Password Security Menu Page 1 Language English, Deutsch, Français, Italiano, Español, Svenska Menu Mode Basic Menu, Custom Menu, Advanced Menu Custom Menu Edit Projector Pointer Pointer 1-8 Menu Display Time Manual, Aut
Lamp Mode Normal, Eco Lamp Type Standard Lamp, Extended Life Lamp Advanced Menu Source Select Picture Volume Image Options Picture Management Projector Options Tools Help Factory Default Screen Type 4:3, 16:9 / Position 3D Reform Wall Color Correction Menu Focus* On, Off Wall Color Correction* On, Off Setup LAN Mode Lamp Setting Screen IP Address Automatic Manual Auto Functions* LAN Mode Password IP Address, Subnet Mask,Gateway Projector Name Security DNS Configuration Domain Name Network T
Menu Elements Highlight Help Button Title bar Close Button Tab Radio button OK Button Cancel Button Solid triangle Check box Slide bar Drag Tool bar Menu windows or dialog boxes typically have the following elements: Cancel button ..... Press to cancel your setting. You will return to the previous menu. Title bar .............. Indicates the menu title. Close button ....... Click to close the window with saving changes. (USB mouse only) Highlight .............
Entering Alphanumeric Characters by Using the Menu Prev Alphabet or numeric characters are used for your IP address or projector name. To enter IP Address or projector name, use the software keyboard. For using the software keyboard, see page E-60. Play Delete Stop Select Setup View Drag ............... Drags to move the tool bar. (for USB mouse operation only) Prev ............... Returns to the previous slide or folder. Next ............... Advances to the next slide or folder. Play .............
Entry Edit Command Picture (not available for Viewer and LAN) Adjusting Brightness, Contrast, Color, Hue, and Sharpness Brightness ...... Adjusts the brightness level or the back raster intensity. Contrast ......... Adjusts the intensity of the image according to the incoming signal. Color .............. Increases or decreases the color saturation level (not valid for RGB). You can edit signals on the Entry List. Load ............... Enables you to select a signal from the list. Cut .................
Masking Unwanted Area (Blanking) This feature allows you to mask any unwanted area of the screen image. Adjust the Top, Bottom, Left or Right blanking with the SELECT or button. Adjusting Position and Clock This allows you to manually adjust the image horizontally and vertically, and adjust Clock and Phase. Selecting Noise Reduction Level (not available for RGB, Viewer and LAN) Select one of the three levels for reducing video noise: Low, Medium or High.
Selecting Gamma Correction Mode Use the or buttons to choose one mode from three options. Each mode is recommended for : Projector Options Using 3D Reform This feature corrects trapezoidal distortion so that the projected image is rectangular. Two options are available for correcting procedures. You can save adjustment settings by using the 3D Reform Save option on Setup (See page E-45). Dynamic ......... For true color reproduction of natural tones Natural ........... Normal settings Black Detail ...
2. Highlight "Automatic". Using Adapting Color Correction [Wall Color Correction] This function allows for correcting the color of the projected images on textured walls using the image sensor on the projector. There are two ways for color correction: Automatic and Manual. Automatic correction affects all colors; Manual correction allows you to correct each color R, G, B, and W respectively. Off .................. Disables this function User 1 to 4 ..... Executes correction. Four settings can be saved.
4. Place the white paper for Wall Color Correction over the working area in the Manual Wall Color Correction (Red) screen. Paste the white paper for Wall Color Correction loosely or get someone to hold it. 6. Use the SELECT button to move the yellow box to select a color density. Moving the yellow box changes the color density of the selected portion in the palette.
Menu Allows you to set preferences for the on-screen menu. Press "OK" to save your changes for all the features of Page 1 and Page 2. [Page 2] [Page1] Turning On / Off Source Display [Source Display]: This option turns on or off input name display such as RGB1/2, Video, and No Input to be displayed in the top right corner of the screen. Selecting Menu Language [Language]: You can choose one of seven languages for on-screen instructions.
Setup Enables you to set operating options. Press "OK" to save your changes for all the features of Page1, Page2, Page3, Page 4, Page 5 and Page 6. [Page 2] [Page 1] Selecting Projector Orientation [Orientation]: This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection.
[Page 3] Enabling Auto Start [Auto Start]: Turns the projector on automatically when the power cable is inserted into an active power outlet and the main power switch is turned on. This eliminates the need to always use the "Power" button on the remote control or projector cabinet. Enabling Power Management [Power Management]: When this option is on and there is no input for five minutes or more, the projector will automatically turn itself off.
[Page 5] [Page 6] Remote Sensor: This option determines which remote sensors on the projector are enabled in wireless mode. The options are: front, rear, right, or left. All checked boxes indicate that they can accept the infrared signal from the supplied remote control. Selecting Communication Speed [Communication Speed]: This feature sets the baud rate of the PC Control port (Mini DIN 9 Pin). It supports data rates from 4800 to 38400 bps. The default is 38400 bps.
Selecting Aspect Ratio and Position for Screen [Screen] Screen Type: Select either 4:3 Screen or 16:9 Screen for the screen to be used. See also "Aspect Ratio" on page E-38. NOTE: When "Resolution" is set to "Native", this selection is inactive. Position: This feature adjusts the vertical position of the image when viewing video with an aspect ratio selected. When some aspect ratios are selected in Image Options, the image is displayed with black borders on the top and bottom.
Setting LAN Mode DNS Configuration This feature allows you to set various setting items when the projector is used on your network. Consult with your network administrator about these settings. ....................... Type in the IP address of DNS server on the network connected to the projector. 12 numeric characters are used. NOTE: • A LAN card is required for LAN connection; NEC's optional wireless LAN card is available. For more information on inserting or ejecting a LAN card, see page E-28.
WEP (for Wireless only) Mail Select this option whether using the WEP (Wired Equivalent Privacy) key for encryption or not. To use encryption, specify WEP key. NOTE: To the Mail Alert feature on wireless LAN connection, select "Infrastructure" for "Mode" in "Network Type." "Test Mail" is available only when there is a LAN card in the PC card slot of the projector. Disable ........... Will not turn on the encryption feature. Your communications may be monitored by someone. 64bit ...............
Make sure that " " is highlighted and then press the ENTER button. The Software keyboard appears. Use the Software keyboard to type a password and then highlight "OK" on the “Enter the Password” screen and press the ENTER button. The [Confirm Password] screen will be displayed. Status 2. Type the same password again. Highlight "OK" on the “Enter the Password” screen and press the ENTER button. Your password will be assigned. Delete To delete your password: 1.
Security The Security function enables you to protect your projector so that the projector will not project a signal unless you enter a keyword. There is also an option to lock the projector by using a registered PC card as a protect key. Once you have registered your PC card as a protect key, you are required to insert the registered PC card into the PC card slot of the projector each time you turn on the projector. You can enable the Security function by using a keyword only. 4.
If you've lost your registered PC card, proceed as follows: NOTE: NEC or your dealer will provide you with your Release Code in exchange for your registered keyword and Request Code. See more information at the end of this section. Using ChalkBoard The ChalkBoard feature allows you to write and draw messages on a projected image. See page E-27 NOTE: This feature is available only when using with USB mouse. See page E26. 1. Press and hold the POWER button for a minimum of two seconds.
MAINTENANCE This section describes the simple maintenance procedures you should follow to replace the lamp and the filter, and to clean the filter, the cabinet and the lens. 4. Insert a new lamp housing until the lamp housing is plugged into the socket. Replacing the Lamp After your lamp has been operating for 2000 hours (Normal mode on the standard life lamp) or longer, the "Lamp" indicator in the cabinet will blink red and the message will appear.
3. Reinstall the new filter cover. Cleaning Cleaning or Replacing the Filter Catch The air-filter sponge keeps the inside of the projector from dust or dirt and should be cleaned after every 100 hours of operation (more often in dusty conditions). If the filter is dirty or clogged, your projector may overheat. CAUTION • Turn off the power and unplug the projector before replacing the filter. • Only clean the outside of the filter cover with a vacuum cleaner.
TROUBLESHOOTING This section helps you resolve problems you may encounter while setting up or using the projector. Power Indicator Indicator Condition Blinking light Off Green blinking Green blinking Orange blinking Steady light Projector Condition 0.5 sec ON, 0.5 sec OFF 2.5 sec ON, 0.5 sec OFF 0.5 sec ON, 0.5 sec OFF Green Orange Note – The main power is off The projector is getting ready Wait for a moment. to turn on. The projector is in Sleep mode. – The projector is cooling down.
Common Problems & Solutions Problem Check These Items Does not turn on • Check that the power cable is plugged in and that the power button on the projector cabinet or the remote control is on. See pages E-17 and 18. • Ensure that the lamp cover or lamp housing is installed correctly. See page E-53. • Check to see if the projector has overheated or the lamp has reached the end of its usable life.
SPECIFICATIONS This section provides technical information about the MT1065/MT1060/MT860 Projector's performance Model Number Optical LCD Panel Resolution Lens Lamp Color Image Sensor Image Size Projection Distance Projection Angle Electrical Inputs Outputs USB Port Video Compatibility Scan Rate Video Bandwidth Color Reproduction Horizontal Resolution External Control Sync Compatibility Built-in Speakers Power Requirement Input Current Power Consumption Mechanical Installation Dimensions MT1065/MT1060/MT
APPENDIX 323(12.7") Cabinet Dimensions 334(13.15") Lens center 115(4.53") Lens center 78.6(3.1") 139(5.47") 92.2(3.63") Unit = mm (inch) 16(0.63") NOTE: The DVI connector is not available on MT860. Pin Assignments of D-Sub RGB Input Connector Mini D-Sub 15 Pin Connector 5 4 3 2 1 10 9 8 7 6 15 14 13 12 11 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level * RGB 1 Input only Pin No.
Compatible Input Signal List Signal # # # # # # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## NTSC PAL SECAM VESA IBM MAC MAC MAC VESA VESA IBM VESA IBM VESA IBM IBM VESA VESA VESA VESA VESA MAC VESA VESA VESA MAC VESA VESA VESA MAC SUN SGI VESA VESA MAC HP SUN VESA VESA SXGA+ HDTV (1080p) SDTV(576i)(625i) SDTV(576p)(625p) HDTV (1080i)(1125i) HDTV (1080i)(1125i) HDTV (720p)(750p) SDTV (480p)(525p) VESA VESA VESA VESA DVD YCbCr DVD YCbCr Resolution ( Dots ) – – – 640 ⳯ 480 640 ⳯ 480
PC Control Codes and Cable Connection Using Software Keyboard PC Control Codes Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OFF 02H 01H 00H 00H 00H 03H INPUT SELECT RGB 1 02H 03H 00H 00H 02H 01H 01H 09H INPUT SELECT RGB 2 02H 03H 00H 00H 02H 01H 02H 0AH INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H INPUT SELECT DVI (DIGITAL)* 02H 03H 00H 00H 02H 01H 1AH 22H INPUT SELECT VIEWER 02H 03H 00H 00H 02H 01H 1FH 27H PICTURE MUT
Power: This controls the power of the projector. On .................. Power is switched on. Operation Using an HTTP Browser Off .................. Power is switched off. Overview The use of HTTP server functions will allow control of the projector from a web browser without the installation of special software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser.
TravelCare Guide 6) Problems or damage caused by expendable supplies or devices connected to the product other than those designated by NEC. TravelCare - a service for international travelers 7) Problems caused by natural consumption, wear or deterioration of parts under normal usage conditions. This product is eligible for "TravelCare", NEC's unique international warranty. Please note that TravelCare coverage differs in part from coverage under the warranty included with the product.
In Asia and Middle East NEC Viewtechnology, Ltd. Address: 686-1, Nishioi, Oi-Machi, Ashigarakami-Gun, Kanagawa 258-0017, Japan Telephone: +81 465 85 2369 Fax Line: +81 465 85 2393 Email Address: support_pjweb@nevt.nec.co.jp WEB Address: http://www.nec-pj.com ABBA Electronics L.L.C. Address: Tariq Bin Ziyad Road, P.O.Box 327, Dubai, United Arab Emirates Telephone: +971 4 371800 Fax Line: +971 4 364283 Email Address: ABBA@emirates.net.
Date: / / P-1/ , , TO: NEC or NEC's Authorized Service Station: FM: (Company & Name with signature) Dear Sir (s), I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your following conditions, and also the Service fee will be charged to my credit card account, if I don't return the Loan units within the specified period. I also confirm following information is correct. Regards.
Condition of your TravelCare Service Program Enduser is requested to understand following condition of TravelCare Service Program and fill necessary information into the application sheet. 1. Service Options: There are 3 types of "Service" available. Enduser has to understand following condition and is required to fill in the Application Sheet. 1) Repair and Return: The 'Faulty unit' is sent or collected from the customer. It is repaired and returned within 10 days to the customer, excluding transport time.
Printed in Japan 7N8P1912
