Ate erm Biz Seriies ZA A-SA A350 00G Instrruc ctio on M Man nua al ሩP Please rea ad th his do ocum ment befo ore us sing this prod duct. ሩK Keep this Instrructio on Manua al forr futu ure re efere ence..
&RQWHQWV Contents ....................................................................................................... 1 FCC Regulatory Statement .......................................................................... 2 CANADA Regulatory Statement .................................................................. 4 License for maintenance upgrade function .................................................. 7 License concerning the Security scan function ............................................
)&& 5HJXODWRU\ 6WDWHPHQW Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This radio transmitter FCCID: 2AA5WSA3500G has been approved by FCC to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna List No. 1 Manufacturer Master Wave Part No. 98241PSAX002 Antenna TYPE Omni antenna Peak Gain 3.57dBi for 2.
&$1$'$ 5HJXODWRU\ 6WDWHPHQW ICES-003 Regulatory Statements This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS247.
Limitations and disclaimers All rights reserved. No part of this manual may be copied or reproduced without prior permission. (2) Contents of this manual may change without notice. (3) We take every possible precaution to ensure the accuracy of this manual, but if anything is unclear or erroneous in the content, please contact us.
z This radio transmitter IC: 11813A-SA3500G has been approved by Industry Canada to operate withthe antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
/LFHQVH IRU PDLQWHQDQFH XSJUDGH IXQFWLRQ Maintenance version update function automatically updates through the Internet when there is an important change in the software of this product. "Important Update" means it indicates that NEC Platforms, Ltd. (Hereafter assumed as "Our company") will provide the software version upgrade of the functionality (For example, software update to improve security failure, etc.) of this product when it is determined to be required.
License concerning the Security scan function Please confirm it before using this product. When this product is used, it is assumed that you have the license for this function. To detect the threat, the security scan function is processed through the Internet as follows. x Automatic update of information file (virus information etc.) used by security scan function. x Confirmation of URL that access the Internet.
Sa afetty IInstructio onss Please read d the ese Safe S ety In nstruction ns ca arefu ully befo b re ussing thiss productt. Th hese Saffety Instrructio ons show w ite ems that musst be e followe ed to o pre even nt da angerr to any perrson and d da amag ge to o pro operrty. Alert A t sym mbo ols below b w are e im mporttant to ffully und dersttand thesse Sa afetyy Insstructtionss. $OH HUW V\ \PE EROV V LQ Q WK KLV LLQVWUXFWLR RQ PD DQX XDO W Warn ning Indicate es a haz zardo ous situa ation n wh hich cou
Warning Power supply x Do not use household power voltages other than those displayed on the AC power cord. Doing so may cause fire or electric shock or malfunction. When plugging this product in a wall outlet where other products are already plugged in, be careful that you do not exceed the maximum current rating of the outlet. Otherwise, a fire, electric shock or malfunction may occur. x Do not scratch, damage, or modify the power cord. Also, do not forcibly bend, pull, twist or tie the cord.
x Do not plac ce th he AC A adaptor in a poorly venti v ilated orr con nfine ed uch as in sttorag ge rack r b nd a bo ooks shelf. Th he AC A area su or behi aptorr ma ay ov verh heat and cau use a fire e or dam mage e. Allso, plac ce ada the AC ada apterr nea ar th he powe er ou utlet and d ens sure that you ca an sily p plug in and remo r ove the t AC A powe p er co ord. eas x The e AC C ad dapte er off thiss produc ct is s for indo oor use onlyy. Do D no ot use e the e AC C adapttor o outd doors s.
x Do not inse ert or o drrop m meta als or o co ombustib ble mate m erialls into th he ntilattion slo ots. If th hose e ob bjec cts g get inside this pro oduc ct, ven rem move e the e AC C po ower co ord from f m the e outlet imm mediately an nd con ntactt us. If you y ntinu ue us sing thiss pro oduc ct witho w out havin h ng con it re epaired,, a fiire, elec e ctric shock or o ma alfun nctio on may m occu ur.
x e fla amm mable e ga ases s suc ch a as an a air du uste er orr dust Do not use ay insid de or o arround th his prod p duct. The e ga ases s ma ay ignite e, spra cau using g a fiire or o ex xplossion. Otherr wa arnings s x Turrn offf th his prod p uct in any a plac ce w wherre use of o a wirreles ss dev vice is proh p ibite ed, ffor exam e mple, in an airp plane e orr hos spita al. Oth herw wise, it may m influ uenc ce elect e a med dical dev vices, roniccs and cau using g an incidentt.
x During or after using this product, protruding objects such as this product's body and connector may become very hot. In particular, this product is covered with a metal case, please be aware that there is a risk of burns. Caution Installation place x Do not place this product in an area exposed to direct sunlight, or in a very hot place, for example near a heat generating appliance such as a stove or a heater. Otherwise, the internal parts of this product may heat up, and a fire may occur.
x Do not block the ventilation slots of this product. This product may heat up, and then a fire may occur. Avoid the following. Placing this product in narrow, poorly-ventilated spaces such as storage racks, bookshelves, and boxes. Placing this product on a carpet and a mat. Covering this product with a tablecloth, etc. x Do not stack this product. Stacking this product may cause a fire because of overheating inside this product.
x If this product will not be used for a long time, remove the AC power cord from the outlet for safety reasons. x When or after using this product, the AC adaptor can reach high temperatures. Be careful of burn injuries. Restrictions x During thunderstorms, do not touch the power cord or connect to any surrounding device. Otherwise, an electric shock caused by a thunderbolt may occur. x Do not climb on this product. Especially be cautious if you have small children in your family.
Preventing damage to this product Follow these instructions to retain performance and prevent malfunction of this product. Installation place x Do not place this product in any of the following locations.
Restrictions x Do not drop or hit this product. Otherwise, it may malfunction. x Do not leave this product in a cold place such as an ice warehouse. Otherwise, this product may operate abnormally. x Disconnect all cords before moving this product. Otherwise, it may malfunction. x This product may operate abnormally if the connecting cords are disconnected when it is on, or if the connection is unstable. When this product is on, do not touch the connecting parts.
1. Precaution for Data and Security For data corruption x If this product turns off or disconnects during data communication, a communication error may occur and cause data corruption. Security notes on wireless LAN products Wireless LAN has the advantage of a LAN connection without the use of Ethernet cables if the device is placed within the reach of radio waves.
You should be fully aware of problems which may happen to you if you do not do your security configuration. We recommend that you use this product only after making the security setting you judged to be necessary based on a proper understanding of the problems which may occur if security settings are not configured. We, NEC Platforms, Ltd.
2. Security scan functions This product offers the following security scan functions. x x x x x x Anti-virus Programs which include virus and dangerous codes are blocked. Web browsing, receiving emails, and the communication of other applications are observed, and checks whether a virus exists in a downloaded file. Intrusion Prevention Security measure level is improved by sensing and defending the network, such as company Intranet, against unauthorized intrusion and attack.
3. Pac P cka age e Con C nte entts This pro oducct pa acka age cont c ains s the follo owin ng ite ems. If som s e ite ems s are e missin m ng from f m the e packa age or if th he page p es of o th his doc cume ent are nott in the corrrect ord der o or miss m ing, con ntactt us s from the info orma ation n on the back k of this doc cume ent fo or in nquirries.
Op ptio on Ƒ Wall-mo ountting kit (PProducct numbber: ZAA-SA/M MK1) Wall-m W mou unting Wo ood screw s ws (2 pie eces) brrackket (1piece) Ƒ USB cla amp p kit (Produ ( uct num mber: ZA-SA/ Z /UC1) USB U ffaste ening de evice e (4 piieces) US SB faste f ening g cable band b d (2 pieces s) 23 of o 51 1 W Wall -mo ounting sscrew ws (22 piecees)
4.
Name (4) ALERT1 lamp Lamp color Explanation Illuminating in orange. 60 seconds after blinking orange. Blinking in orange. 60 seconds after threat is detected. OFF No threat detected. Illuminating in green. Illuminating in orange. Preparing for security scan function. Security scan function activation*** is not done. Ongoing security scan function activation. Security scan function license has expired. 30 days until the license expiration of the security scan function is cut.
Port Name Display Explanation Port for connecting USB devices. (9) USB port* (12) WAN port WAN Port for connecting broadband modem, etc. (13) LAN port LAN Port for connecting computer, etc. via Ethernet cable. * USB function is scheduled for future support. Configuration switch Name (10) WPS switch* (11) Security scan function switch Display WPS OPT1 Explanation This switch is used to set the wireless LAN by using the wireless LAN setting (WPS) function.
Ba ack k ( Antenna (3) a conn necto or (5)) Anti--theft hook k (4) AC A ad daptor connecto or (1)) OPT T2 sw witch (2 2) RES SET s switch h Co onfig gurratio on swit s tch Na ame (1 1) OP PT2 s switc ch (2 2) RE ESET T switch Dis spla ay O OPT2 RE ESET T Ex xplanation This switch T h is us sed when w firmw ware is up pdated d. T This switch h is fo or initializa ation. (R Referr to ³1 10.
Ports and others Name (3) Antenna connector* Display Explanation ANT Separately sold optional external antenna (ANT) is installed in 2 places. Please note that the performance is not demonstrated in the installation of only one place. Connect the AC adaptor to this jack. (4) AC adaptor connector (5) Anti-theft hook * ** − Anti-theft key installation hole. This product is protected from theft by installing a commercially available security wire.
5. Installation space This product should be installed and operated with a minimum separation of 7 cm (2.76 inch) from any nearby walls or computers (on all sides except the bottom, or all sides except the wall-mounted side if mounted on a wall.). :DUQLQJ x Please do not drop this product. The fall may cause breakdown, and when it is used just as it is, fire and electric shock may occur.
30 of o 51 1
7c cm 7 7cm 7cm m 7c cm 7 7cm W ning Warn g Plea P ase n note the follo owing g wh hen conn c nectiing and a insta i alling g the e AC C ada apterr. x Use U only y the e AC C ada apto or an nd po ower cord su uppllied for this t prod duct.. Do D not use th he AC A adapttor and a pow p wer co ord of o otther prod ductts. x The T AC adaptorr and d power cord d su upplied for f th his p product mus st be e used u d togethe er.
6. Prod P duct ins sta alla atio on Pre epa arattion Ple ease prepare e a head h d scrrewd driver. Fo or vert v tica al plac p cem men nt (1)) Ins sert the stan s nd to o the side e of the main n unit. Ins sert the stan s nd intto th he moun m nting hole es. (2)) Fa asten n the e sta and and a tthe main m n unit with th he prrovid ded stan nd sc crew w.
(3) Atttach the rubb ber feet (pro ovide ed) at a the e ba ack of o the e sta and.
Fo or wal w l-m mou unting (1)) De eterm mine e the e po ositio on to o mount the e ma ain unit, an d in nstall the e wo ood screwss ho orizo ontally in nto the t w in ttwo plac wall ces. hten the e wo ood scre s ews untiil the e en nd a and leav ve a spa ace * Do not tigh out 3mm 3 m fro om tthe wall. w . abo (2)) Th he wall-m moun nting g bra acke et is insta alled d on the bas se off the e ma ain unit u w with the e wa all-mounting scre ews.
7. Netw work Se etup (1) Co onne ect the supp s plied d Eth hern net cable c e be etwe een the WA AN port p of tthis pro oducct an nd the LA AN p port of o yo our broa b adband mode m em, etc. %URDG GEDQG G PRG GHP H HWF ,QWHUQ QHW Compu uter * Wh hen sta artin ng th his pro duc ct fo or th he fiirst tim e, p plea ase turn n it on witthou ut conn c nect ing an Eth hern net cab ble to t the t WA AN port p t.
8. In nitia al Co onffigu ura atio on Ple ease e inittializze th his produ p uct acco a ording g to the e followin ng proce edure e. With W tthis se etting g, acctivation is done d e as the e tarrget prod duct of the t licen nse agre eeme ent, ma ainte enan nce and a repai r ir. (1)) Co ompu uter and d the e LAN N po ort off this s pro oduc ct are e co onnected d with h an n Eth hern net cable c e. (2)) Se et the co omputer''s IP P ad ddres ss to o 16 69.25 54.xx xx.xx xx/16.
(5)) Wh hen inpu ut is com mpletted, click k "Ap pply". (6)) At the login sc creen n, en nter the t user u rnam me and pass p sword d be elow. User U rnam me adm min Pass P sword d Set adm min pa assw word base ed from p proce edure e (4). (7) Please sele ect th he meth m od for f settin ng th he IP P add dress of this productt. An n IP dresss th hat can c mmu unica ate over o r the e In ntern net is neces ssarry. T The add com follo owin ng arre th he tw wo tyypes s of setu up m metho od.
iv. E Each h ite em is s sett. D DHC CP Clie C nt Func F ction n R move Rem e the che eck on o [E Enab ble] IPv4 I 4 add dres ss/ne etma ask (bit spe ecific catio on) IP ad ddre ess/n netm mask k of this p product is i inputte ed. Fixe F ed ad ddre ess IP ad ddre ess o of the e de efault gattewa ay is s inputted d. IPv4 I 4 priimarry DNS D IP ad ddre ess o of primarry DNS sserv ver is s inp putted. IPv4 I 4 secondary y DN NS IP ad ddre ess o of se econdary y DN NS se erve er is inpu utted d. v.
(8)) Th his produ uct is s acttivated. Ac ctivattion mea ans valid v datio on off the e seccurity y sca an fu uncttion and a the starrt of using tthe licen nse. i. The e lam mp displa ay off this s pro oduc ct co onfirm ms th he fo ollow wing. POWER R lamp p NETW WORK K lamp ALE ERT2 lamp illum minating g in gree en iillumina ating in green illuminating in orange ii.
If the ALERT2 lamp is not turned off, activation of this product has failed. Please confirm the following. Can this product communicate over the Internet? ĺ Confirm the NETWORK lamp of this product illuminates green. ĺ Confirm the setting of the higher-level device of this product (broadband modem etc.). ĺ In case the IP address of this product is set by Web, confirm that the IP address, the default gateway address, and the DNS server address of this product are correctly set.
9. Firmware Update The firmware of this product is updated by using the maintenance upgrade function. 1. This product regularly accesses the management server and confirms the presence of a new firmware. 2. The INFO lamp of this product illuminates orange when there is a new firmware. 3. The OPT2 switch of this product is pressed for two seconds or more. 4. The INFO lamp blinks orange when firmware update starts. 5. This product restarts automatically when firmware update is completed.
10 0. Init I tia aliz zatiion n Initializa ation n is to dele d te th he conte c ents sett forr this s pro oducct and set s iti to its se tthis productt is nott op peratting well an nd is s ussed deffault values. In cas diffe eren ntly u until now w, it is reccom mmen nded d to initia alize this prod ductt and d sett it frrom the beg ginning.
In nitia aliza atio on wit w th the RE ESE ET sw witc ch Inittializ ze ussing the RES SET T swiitch of th his produ uct. 1. Co onfirm m that th he POWER lamp l p of this prod duct is green g n. Wa ait ffor abou a ut 140 seconds s when w po ower is turn ned on aga ain or imm med diately affter turni t o th he po owerr. ng on 2.
11. Se ecu urin ng th he US USB in plac ce In order to o sec cure e the e US SB de evice fro om ccomiing loose e fro om th he USB U portt, a SB clam c mp kit k (P Product num mber: ZA A-SA A/UC C1) is so old ssepa arate ely. Plea P ase US pu urchase it if nec cess sary. When the cab W ble band b d is u used d onc ce, iti is nece essa ary to t cu ut it with nipperss to de etach h it.
(2 2) The c cable e band is s insstalle ed. Be ca arefu ul wh hen tigh htening. Whe en th he cable c e band is pu ulled d too o mu uch, th he U USB connecttor m might be e dam maged and a the faste enin ng de evice e miight co ome e off. Afte er tig ghtening g, use nip pperrs to cut the exce ess cable ba and. * Be sure e to cut the e cab ble strap s p ussing a cutterr be efore e dettach hing the B de evice e.
12. Product Specifications Item Aterm SA3500G Product name WAN interface LAN interface Wireless LAN interface* Function Physical Interface 8 PIN modular jacks(RJ-45) Number of ports 1 port Type 1000BASE-T/100BASE-TX(IEEE802.3ab/ IEEE802.3u)Auto MDI/MDI-X Physical Interface 8 PIN modular jacks(RJ-45) Number of ports 4 port Type 1000BASE-T/100BASE-TX(IEEE802.3ab/ IEEE802.3u)Auto MDI/MDI-X Antenna Built-in antenna IEEE802.11n Frequency 2.
13. Software License Agreement NEC Platforms Ltd. (Hereafter assumed as "Our company") allows the customer to use the software (Hereafter assumed as "This software") installed in our Aterm SA3500G (Hereafter assumed as "This product") and the related document (Hereafter assumed as "This document") (Collectively, software and this document is referred to as the "Licensed product") based on the software license agreement (Hereafter assumed as "This contract").
4. Contract period and contract cancellation (1) Customer can terminate this contract by written notice to the company at least 30 days before the contract termination. (2) When the customer does not comply with any provisions of this contract, our company can cancel this contract any time. (3) After cancelling this contract, the customer cannot use this product and this document for any purpose.
14. Contact Information (As of January, 2016) 3URGXFW 6XSSRUW http://www.necplatforms.co.jp/product/security_ap/ Aterm SA3500G support information such as manual for downloading and useful information are published. For questions on the function and handling method of the Aterm Biz product, you can contact us by mail. Please follow the procedure in the website below and input your questions. https://www.necplatforms.co.jp/scripts/net_s/form.
Aterm Biz ,QIRUPDWLRQ &HQWHU For questions on Aterm Biz's function, operation, setting, fault diagnosis, maintenance, repair, optional purchases, etc., please contact the Aterm Biz Information Center. Request NaviDial TEL: 0570-025225 (Same number from a mobile phone.) * * * Call charge is customer charged. It is not likely to connect from some parts of IP lines (050 numbers). When not connecting, please use other means of communication such as mobile phones.
+DQGOLQJ RI 3HUVRQDO ,QIRUPDWLRQ In our company, we established the privacy protection policy and we strive for the protection of the customer's personal information. Customer personal information included in the information provided by the customer is acquired in order to answer inquiries and contact customers, and is never used for other purposes. Moreover, personal information is never offered to a third party without the consent of the customer.
Store AM1-002912-002 NEC Platforms, Ltd.