User Guide NX9200 Ver. 1.0 2006. 01.
LIMITED WARRANTY STATEMENT 1. WHAT THIS WARRANTY COVERS: CHMC offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for ONE (1) year beginning on the date of purchase of the product.
(9) Products operated outside published maximum ratings. (10) Products used or obtained in a rental program. (11) Consumables (such as fuses). 3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. CHMC Co., Ltd.
SUBJECT The NX9200 phone has been designed to operate on the latest digital mobile communication technology, Code Division Multiple Access (CDMA). This CDMA digital technology has greatly enhanced voice clarity and can provide a variety of advanced features. Currently, CDMA mobile communication technology has been commercially used in Cellular and Personal Communication Service (PCS). The difference between them is the operating frequency spectrum. Cellular uses 800MHz and PCS uses 1.9GHz.
Introduction Highlights Congratulations! Your new mobile phone will change your way of communicating and is a compact, lightweight personal communication system with added features for the person on the go. Our advanced digital mobile communication technology allows you to do the followings.
using your phone. Caution for Battery Use z Do not disassemble. z Do not short-circuit. z Do not exposure to high temperature : 60℃ (140℉) z Do not incinerate. Caring for Battery Use z Must be recycled or disposed of properly Caution for Adapter (Charger) Use z Using the wrong battery charger could cause damage to your phone and void your warranty may burst causing injury to person and damage. z The charger or adapter is intended for indoor use only.
Unlocking Your Phone If you received your Verizon Wireless NX9200 in the mail, you may need to unlock it before making calls. 1. Press the END/PWR Switch for 2~3 seconds. 2. Highlight Unlock and press . 3. Enter your four-digit lock code. For security purposes, the code will not be visible as you type. Note: If you can’t recall your lock code, try using the last four digits of your Social Security number, the last four digits of your Verizon Wireless Phone Number or 0000. View of Phone 1.
Turning Your Phone On and Off To turn your phone on, move the On/Off Switch (near the antenna) to the ON position. Your phone performs a short self-test before letting you know it is operational. If your phone does not turn on, make sure the battery is installed correctly and is adequately charged or has external power (via the AC Adapter, Cigarette Lighter Adapter or Hands-Free Car Kit). To turn your phone off, move the On/Off Switch to the OFF position.
As you navigate through a menu, the options are highlighted (Highlighted Test Example ) . Select an option by highlighting and pressing it. The scroll bar at the right of the menu keeps track of your position in the menu at all times. For example, if you want to view your last incoming call: 1. From the Main Menu, highlight and press . (It may already be highlighted.) Recent Calls 2. Press the Navigation Key down to highlight and press .
Display Icons Display icons are the symbols your phone uses to communicate important information.
Indicator Bar Icon STATUS DESCRIPTION Indicator Bar ICON DESCRIPTION RINGTONE TEXT MESSAGE VOICE MAIL MISSED CALL CALENDAR SPEAKER PHONE ALARM IM Antenna The antenna on your NX9200 provides maximum reception without the inconvenience of extending of retracting it. !!! WARNING – CHOKING HAZARD – ANTENNA MAY BECOME DISLODGED Attempting to remove or repeated twisting of the antenna will loosen the materials securing it into antenna.
Battery Capacity Your Verizon Wireless NX9200 is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your battery before it is fully drained. The battery provides approximately hours of continuous digital talk time or approximately 170hours of continuous digital standby time. Note: Long backlight settings affect the battery’s talk and standby times. When the battery reaches 5% of its capacity, the battery icon blinks.
3. When you are finished with your call, highlight and press . If the phone is in Active Flip Mode , closing the Flip will also end the call. Roaming With Your Phone When you use your phone outside the Verizon Wireless Network, it’s called roaming. If you’re roaming in areas where agreements are in place with PCS CDMA providers, you will pay the roaming rate plus longdistance charges, where they apply. (See “Display Icons” for network indication icons.
z Roam Call – Dials the phone number using the current PCS CDMA or analog cellular network. z Save – Saves the phone number in your Phone Book. (See “Saving a Phone Number” on the following page.) z Find – Displays phone numbers in your Phone Book that contain the entered numbers. (See “Finding a Phone Number” ) z Wait – Inserts a Hard Pause. (See “Dialing and Saving Phone Numbers With Pauses” ) z 2- Second pause – Inserts a two-second pause.
Incoming Call Notification Depending on your settings, your phone notifies you of incoming calls in the following ways: z The phone rings or vibrates z The backlight illuminates z The screen displays an incoming call message z The phone number of the caller is displayed of the phone number available z The caller’s name is displayed if the phone number is in your Phone Book The following options are also displayed. To select an option, highlight it and press [SEND]. z Answer – answers the call.
Setting the Ring Volume to Vibrate To set the phone to Vibrate Mode, press the down Volume Control key until Ring Volume Vibrate is displayed or press and hold Shift Key(*) . To set the phone to Vibrate Mode using the Main Menu, see “Adjusting the Volume.” New Massage Alerts If it is a voicemail message, the following options are displayed. To select an option, highlight it and press [SEND]. z END – clears the message pop-up. (You can also press [CLR].
[OK]. z View Now – Displays the message. z View Later – Returns to the Main Menu. (You can also press [CLR].) Retrieving Page/Text Messages To retrieve page/text messages: 1. From the Main Menu, highlight Inbox and press [OK]. 2. Highlight an entry and press [OK]. ☞Tip! You can also access page/text messages from the Main Menu by pressing the Navigation Key up/down. 3. Highlight the message you want to display and press [OK]. Press the Navigation Key down to display additional text.
To save the received number in the message into Contacts: 1. While displaying a text message, press RSK to display options. 2. Highlight Add To Contacts and press [OK] to save the number in Contacts. Erasing Inbox 1. From the Main Menu, highlight Inbox and press [OK]. 2. Press [RSK] to erase Inbox. Page/Text Message Storage Your NX9200 can store up to 50 page/text messages. When the message memory is 90% full, a warning message prompts you to erase messages to obtain more memory space.
1. From the Main Menu, enter Settings and Tools. 2. Choose Sounds Settings to press [OK]. 3. Highlight any entries you want to adjust to press [OK]. 4. You can adjust Master Volume, Call Sounds, Alert Sounds, Keypad Volume, Earpiece Volume, Service Alerts, Power On/Off and Alarm Sounds in Sound Settings menu. ☞Tip! You can use the Volume Control keys to adjust the Ring Volume or the Voice Volume during a call with side volume keys.
4. Choose an entry among TXT Msg , PIX-FLIX Msg or Voicemail Msg and press [OK]. 5. You can adjust Tone, Vibrate or Reminder in each screen above. Alert Notification To enable Service Alerts: 1. From the Main Menu, enter Settings & Tools. 2. Choose Sounds Settings to press [OK]. 3. Highlight Service Alerts and press [OK]. 4. Choose an entry among ERI , Minute Beep or Call Connect and press [OK]. 5. You can turn on/off ERI , Minute Beep or Call Connect in each screen above.
2. Choose Phone Settings to press [OK]. 3. Highlight Security and press [OK]. 4. Enter your lock code. Locking Your Phone When your phone is locked, you can only make calls to 911, Customer Care and Special Numbers or receive incoming calls. To lock your phone: 1. From the Security menu, highlight Lock Mode and press [OK]. 2. Choose an entry among Device or Location and press [OK]. 3. You can lock/unlock Device and Location. ☞Tip! There is an option of On Power Up in Device Lock Mode.
3. Highlight Security and press [OK]. 4. Enter your lock code and highlight Edit Code. 5. You can adjust your lock codes in Device and Location screens respectively. Safety Guidelines Provided herein is the TIA Safety Information for Wireless Handheld phones. Inclusion of this text in the terminal unit’s owner’s manual is required for CTIA Certification. TIA Safety Information Provided herein is the complete TIA Safety Information for Wireless Handheld phones.
(C95.1). The design of your phone complies with the FCC guidelines (and those standards). ANTENNA CARE Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. PHONE OPERATION NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.
with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers: • Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON; • Should not carry the phone in a breast pocket; • Should use the ear opposite the pacemaker to minimize the potential for interference .
BLASTING AREAS To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio”. Obey all signs and instructions. POTENTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
devices near you, please visit www.recyclewirelessphones.com. FDA Consumer Update The U.S. Food and Drug Administration’s Center for Devices and Radiological Health Consumer Update on Mobile Phones 1. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe.
authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.
exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document. 3.
studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don’t know with certainty what the results of such studies mean for human health.
6. What is FDA doing to find out more about the possible health effects of wireless phone RF? FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996.
Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the body’s ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects. Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (http://www.fcc.
If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.
11. What about wireless phone interference with medical equipment? Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI).
Safety Information 1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS .POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death. INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone.
SAFETY INFORMATION FOR RF EXPOSURE Body worn operation This device was tested for typical body-worn operations with the back of the phone kept 20 mm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 20 mm. separation distance between the user’s body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly.
SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
