Frequently Asked Questions

D2423 Capsule Max FAQ
Display Related
How do I use the keystone correction?
Capsule Max supports both automatic (vertical ±40°) and manual (horizontal ±40°) keystone
correction. When adjusting the horizontal keystoning, go to Settings>Projector Settings to turn off auto
keystone correction and adjust manually.
How to I activate Capsule Max's autofocus?
You can slightly move the device or press and hold the "menu" button for 2-3 seconds to trigger the
autofocus. If necessary, you could press the volume +/- buttons to manually adjust the focus.
How to do zoom the image in and out? Capsule Max doesn't have a zoom function.
Adjusting the Brightness
Capsule Max will automatically switch to a lower brightness mode when it is not charged in order to
save battery. Battery saving mode is the default mode for Capsule Max. If you want a brighter image,
please choose Standard Mode: Settings>Projector Settings>Image Mode>Standard Mode
How do I adjust the color display?
If you find the color temperature is too slightly blue, please adjust color temperature by going to:
Settings>Projector Settings>Color Temperature, and choose between “normal”, “cool”, and “warm”.
What's Capsule Max's full projection range?
The distance between Capsule Max and the projection surface must be a minimum of 23 inches (0.58
meters) and a maximum of 121 inches (3.08 meters) to get a projection image from 40 to 80 inches.
For the best results, set the projector between 20 and 100 inches away
Operation Related
How do I screen mirror on Capusle Max?
IOS Devices:
1. Make sure your phone and Capsule Max are connected to the same Wi-Fi network
2. Enable the Screen Mirroring on your iOS device in the control center
3. Once Capsule Max shows up on your phone's Screen Mirroring List, select it to connect
Android Devices:
a. Switch on Capsule Max and go to Settings>General>Screen Mirroring>Android
b. Enable the Screen Mirroring on your phone via the pull-down menu, Settings, or WLAN settings
c. Select ""Nebula-xxxxxx"" to connect
Please note that copyrighted content won't be able to be mirrored or cast.
How do I play videos when no Wi-Fi is
available?
- Download the videos to a USB drive
- Plug the USB drive into Capsule Max to play
How do I pair the remote with Capsule Max?
Capsule Max's remote is an IR remote, so you will need to point it to the IR receiver (black dot) on the
device to control the Capsule Max.
How do I switch to Bluetooth speaker mode? You can press the Bluetooth Switch button on the device to switch
Software Related
How do I control Netflix on my Capsule Max? It's recommended to use our Nebula Connect app's mouse mode to control.
How to download Nebula Connect app? You can download it from Google Play Store on your Android devices or the App Store on iOS devices.
How do I use the Nebula Connect app？
1. Make sure that your phone's Bluetooth is turned on
2. Open the Nebula Connect app on your phone and click the "+" on the top right to connect with
Capsule Max
3. Once connected, you can select either mouse mode or controller mode to operate
How do I upgrade the firmware? Go to Settings>Upgrade>Check Updates
How do I recover/reset Capsule Max? Go to Settings>About>Recovery
Can I sideload Android apps to my Capsule
Max?
Yes, you can download the APK file of the app to a USB drive and plug the USB drive into the Capsule
Max to install.
External Device
connection
related
What USB drive formats are supported? FAT32/NTFS/exFAT
Does Capsule Max support HDCP? Yes. We are a member of HDMI, and the interface of HDMI supports HDCP protocol.
What are the supported interfaces? USB/HDMI/Bluetooth
What is the maximum supported hard drive
size?
Up to 2TB