Nebula Mars Mars Ⅱ II Pro User Manual Owner’s Manual
Table of Content 01 Safety Instructions 04 What’s Included 04 Overview 09 Getting Started 11 Nebula App 11 Settings 14 Using the Nebula Mars II Pro 16 Specifications 17 Troubleshooting 18 Notice 20 Trademarks 20 Warranty
English Safety Instructions Read and understand all instructions before you use this device. Do not make any changes or settings that are not described in this manual. If physical injury, loss of data or damage is caused by failure to follow instructions, the warranty does not apply. Setup • To reduce the risk of fire and/or electric shock, do not expose the device to rain or moisture, and objects filled with liquids, such as vases, should not be placed on the device.
Power Supply • Use only the provided power adapter. English • Power off the device before removing the power supply from the socket. • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from this device. • Unplug this device if there are lightning storms or when unused for a long period of time.
Cleaning English • Power off the device and remove it from the power supply before cleaning the surface. • Use a soft, lint-free cloth. Never use liquid, gaseous, or easily flammable cleansers (like sprays, abrasives, polishes, and alcohol). • Do not use any liquid cleaning agents to clean the lens as they may damage the protective coating on the lens. • Wipe over the surfaces gently. Be careful that you do not scratch the surfaces. • Use lens cleaning paper to clean the lens of the projector.
English What’s Included Remote control with batteries Main unit Owner’s Manual Power Adapter Power cord Manual Overview 1.
2.
3.
English 4. Bottom View 1 1 Tripod socket 5.
1 English • Power on / off / switch to standby 2 • Press to enter / exit mouse key mode. 3 • Press to confirm a selection or entry • Pause / resume during play 4 • Press to access the home menu 5 • Access more options during play (availability of options are dependent on the source input).
English Getting Started 1. Placement Place Mars II Pro on a stable, flat foundation in front of the projection surface. For the best results, the projection surface should be white and flat. The distance between the projector and the projection surface must be a minimum of 1 meter (39.4 inches) and a maximum of 3 meters (118 inches). 8” 11 1 .4” 39 T • It is unnecessary to tilt the projector towards the projection surface. You can correct the projection image with the built-in keystone correction.
2. Prepare the Remote Control English ① For first-time use, remove the plastic battery insulation tab to activate the remote control batteries. ② To replace the battery, slide off the battery compartment backplate to open the battery compartment, insert new batteries (matching the polarity (+/-) indicated), and close the battery compartment. 3. Get Started ① Fully charge the built-in battery before using for the first time.
English Nebula App To easily control the projector, we recommend you to download the devoted Nebula App, Nebula Connect. Using this app, you can use your smartphone’s keyboard to input text and control the projector by operating a mouse on the screen. ① Download the Nebula Connect app from the App Store (iOS devices) or Google Play (Android devices). ② Enable Bluetooth on your smartphone and select [Nebula] as the device to be connected.
Projector Mode English You can connect Bluetooth headphones or a speaker to Mars II Pro while it’s in projector mode. ① On the home menu, select [Settings] > [Bluetooth] and press . ② Follow the on-screen instructions to complete the Bluetooth connection. 3. Projector On the home menu, select [Settings] > [Projector], and press .
4. App Manager English ① On the home menu, select [Settings] > [App Manager] and press . ② Select an app and check the current version, open or force stop, check the storage used, clear data or cache, or uninstall it. T When more than 3 apps are installed, you can select [All] at the bottom line of the home page to enter the [Apps] page. Select an app and press on the remote control, and then you can select [Move To Home] or [Uninstall]. 5.
Using the Nebula Mars II Pro English 1. Connect to HDMI Playback Devices This projector supports connections with various HDMI playback devices such as TV stick, TV box, DVD player, set-top box (STB), game console or other devices. ① Connect this projector to an HDMI playback device with an HDMI cable (not provided). . (*It will ② On the home menu, select [HDMI] , and press automatically start the HDMI playback when connected to an HDMI playback device for the first time.) HDMI 2.
English For Android devices: T Certain content may be unavailable to be cast due to copyright restrictions. In this case, you can stream the content via the same app installed in your Nebula Mars II Pro. 3. Select an App Once connected to a wireless network, you can access online services, enjoy movies, music, and pictures, and browse online. Apart from the pre-installed apps, you can also install additional apps from the Nebula Store or from a USB flash drive.
English Specifications Specifications are subject to change without notice. Power supply: DC 19V 3A Power consumption: < 57W Standby power consumption: < 0.5W Display technology: 0.3 inch 1280 × 720p DLP Light source: RGB LED Projection image size: 30 - 150 inch Resolution: 1280 × 720 pixels Brightness: 500 ANSI Lumens Contrast ratio: 1000:1 Projection ratio: 1.2 Speaker drivers: 10 w × 2 Bluetooth: V4.2 Built-in battery type: Li-Polymer Capacity: 3350 mAh 14.
Troubleshooting English ① Fail to power on by the remote control? • Make sure that the device is connected to the power supply. • Slide down the lens cover. ② Fail to power on by sliding down the lens cover? • Make sure that the device is connected to the power supply. • Slide up the lens cover and wait for 10 seconds, then try again. ③ The remote control doesn’t work? • Remove the battery insulation tab to activate the remote control batteries. • Replace new batteries.
English Notice Declaration of Conformity This product complies with the radio interference requirements of the European Community. Hereby, Anker Innovations Limited. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the Declaration of Conformity, visit the Web site www.seenebula.com. BT Maximum output power: 8 dBm; BT Frequency band: 2402~2480 MHz; Wi-Fi Max Output Power: 19 dBm (2.
English interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the partly responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
English Trademarks HDMI, and HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries. The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
+1 (800) 988 7973 (US) Mon-Fri 9:00am - 5:00pm (PT) +44 (0) 1604 936200 (UK) Mon-Fri 6:00 - 11:00 (GMT) +49 (0) 69 9579 7960 (DE) Mo-Fr 6:00 - 11:00 +81 03 4455 7823 ( 日本 ) 月 - 金 9:00-17:00 ©Anker Innovations Limited. All rights reserved. NEBULA and the NEBULA logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
