Quick Start Guide

12”

Quick start guide

4 5 6

Insert plug behind the charge

base. Shorten the cord as

needed by wrapping it behind

the charge base.

Download the MyNeato

application.

Select a clear area with good Wi-Fi

coverage. Make sure the charge base

is against the wall and plugged in.

Check your mobile device setting

to make sure the Bluetooth is

switched on.

Place the robot against the

charge base. When docked

properly, the battery icon will

light up.

Finish your set up process

with the MyNeato application.

PAGE 1
Quick start guide 1 Insert plug behind the charge base. Shorten the cord as needed by wrapping it behind the charge base. 2 Select a clear area with good Wi-Fi coverage. Make sure the charge base is against the wall and plugged in. 12” 3 Place the robot against the charge base. When docked properly, the battery icon will light up. 6 Finish your set up process with the MyNeato application. 12” 12” 4 Download the MyNeato application.
PAGE 2
Helpful hints Set up your house Keep your charge base secure Before the robot starts to vacuum, pick up items that could become tangled, such as cables, socks, and shoelaces. Tuck fringes under rugs. Your charge base comes with a pad designed to keep it secure on a hardwood floor. Remove these pads if you plan to place the charge base on carpet.