Quick Guide

Smartbrief Quick Guide
1. Grab a new Smartbrief, fold over the front
2. If the transmitter was not in use, wake it up by
attaching it to the new brief *
3. Put the brief on the resident & attach the transmitter
4. Conrm “Dry” status on the dashboard.
- Fold about 2” of the front edge outwards
- Makes sure black lines are straight
- Tabbed end goes on resident’s back side
- Align the transmitter lines with brief lines
- Hold tightly until the light ashes to wake it up
- No need to lock the latch
- Take the transmitter o afterwards
- Align the transmitter lines with brief lines
- Hold tightly until the light ashes once
- Push the latch down all the way to lock it
- Double-check the alignment
* Skip this step if you are changing the brief
[e-mail]