PC Expanion User’s Manual (U200, U2000 Series) © Copyright by Ncomputing Co. Ltd. 2004 . - Illegal copying of this software, hardware and this documentation is prohibited by law. All other brand- and product names are trademarks of registered trademarks of the respective owners.
Safety Instructions Warning - Do not use this system on an unstable cart, stand or table. The product may fall, causing serious damage to the product. - Slots and openings in the cabinet and the back have been provided for ventilation. To ensure reliable operation of your computer, and to protect it from overheating, do not block or cover these openings. - Never push objects of any kind into the system through the cabinet openings.
FCC Information to Use Note : This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. May cause harmful interference to radio communications.
Contents overview and Hardware installation of PC Expanion 1. Introductions - Configuration of PC Expanion 2. Overview - Front - Rear I Installation device driver and NCU-2000/XP Software 1. Connecting PC Expanion to the Computer 2. Installing the Driver in Windows XP 3.
Overview & H/W installation of PC Expanion 1. Introductions PC Expanion is the world’s first terminal unit that does not require a CPU, hard-driver, or CD-ROM yet executes as if it’s an ordinary PC with hardware, With PC Expanions exclusive UTMA(Ultra Thin Multi Access) technology. PC Expanion is executed under windows and USB2.0. Also, PC Expanion have the VGA solution under USB2.0.
2. Overview 1. Front 1 2 3 4 5 ① Power button Turn on/off PC Expanion. ② Power Indicators Light up when the system on. ③ Power Indicators 2 Light up when the system on. ④ Keyboard operation Indicators Blinks when Keyboard operation ⑤ Mouse operation Indicators Blinks when Mouse operation ⑥ USB Hub Indicators Light up when PC Expanion USB ready to use.
2. Rear 1 2 3 4 5 6 7 ① Power Inlet (DC-IN) Jack Connection for ac adapter power cord ② PC Connect USB 2.
Installation device driver and NCU-2000/XP Software PC Expanion can be installed in the operating systems Windows XP and Windows 2000. 1. Connecting PC Expanion to the Computer 1. Switch on your computer 2. Remove the enclosed USB cable from the package. The USB cable hast two different plugs one that is flat and square (known as the Series-B connector) and one that is rectangular ( known as the Series-A connector). 3. Insert the flat "series A" plug in your computer s USB port. 4.
2. Installing the Driver in Windows XP Once you have connected PC Expanion to the computer, press the button from the PCExpanion for Power On, now the Plug & Play mechanism of Windows XP recognize the PC Expanion automatically. The found New Hardware assistant is started. Insert the PC Expanion CD and follow the instructions on the screen. Note the following: 1. When asked: “ What do you want the wizard to do?”, select the option “Install the software automatically (Recommended)” and confirm with “Next”.
3. When the Hardware Wizard reports that “The wizard has finished installing the software for USB 2.0 Display Device(USB)" click "Finish". 4. After your confirm the Hardware Wizard comes a second time and asked. “What do you want the wizard to do?", select teh option "Install the software automatically ( Recommended)” and confirm with “Next”. 5. In the next window, confirm "USB 2.0 Display Device(DISPLAY)" as the Hardware match by clicking “Continue Anyway”.
6. When the Hardware Wizard reports that "The wizard has finished installing the software for USB 2.0 Display Device(DISPLAY)" click "Finish". In the next step, install the NCU-2000/XP software. For more information, see the section "Installing the NCU-2000/XP Software".
2. Installing NCU-2000/XP Software Insert PC Expanion installation CD into your PC’s CD-ROM and follow the instructions. 1. Installation programm will start automatically. When the installation screen appears, click [SETUP] 2. If your computer is connecting to the internet, it is recommended to install the latest software version directly from FTP-server via Internet. To do so, click [Yes] and wait until download of the software has been finished.
5. Please read the End User License Agreement and check the [I agree] box, 6. Please read the Terms of Use, check the [I agree] box and click [Next]. 7. “Select installation folder” windows appears. Click [Next] button, if you want to install NCU-2000-XP in the default folder.
8. Enter the Serial Number and Activation Key you find on the buttom side of the PC Expanion and type in the user’s information. 9. 10. Click [Next] or go [Back], if you want to change something. 11. System copies files needed for installation. 12. Add now the user profile: At this point you can install new user profiles. To do so, the software provides you with the program “user accounts” from the Windows control panel. 13.
