Digital Home Health Scale Model DHH-10BT Operator Manual July 15, 2019 PN 196008
Contents 1.0 2.0 Contents Introduction ................................................................................. 1 1.1 Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Assembly ..................................................................................... 3 2.1 Scale Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery Installation . . . . . . . . . . . . . . . . .
Introduction 1.0 Introduction The DHH-10BT is efficiently designed to provide accurate, reliable and repeatable weight measurements. Figure 1-1.
DHH10-BT 1.1 Safety Safety Signal Definitions: DANGER WARNING CAUTION IMPORTANT Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Includes hazards that are exposed when guards are removed. Indicates a potentially hazardous situation that, if not avoided could result in serious injury or death. Includes hazards that are exposed when guards are removed.
Assembly 2.0 Assembly Place the shipping container in an open area with room for unpacking. Ensure the shipping container is free of any outside damage. If there is damage, do not open the shipping container, take pictures of the damage and notify Rice Lake Weighing Systems and the shipper immediately. IMPORTANT Retain the original shipping materials and container should the product need to be returned.
DHH10-BT 2.1.2 Battery Troubleshooting If you are having difficulty turning off or on the scale, there may be an issue with battery placement or battery power. Power On Failure If the scale fails to turn on, check whether batteries are properly installed. Insert or replace batteries. If you cannot resolve the problem, please contact your dealer for help.
Assembly 2.1.3 Unit Conversion To convert between kilogram (kg) and pound (lb) units: 1. Locate the KG/LB button on the back of the scale next to the battery compartment. KG/LB Button Figure 2-2. DHH-10BT KG/LB Button 2. Push the KG/LB button to switch scale between kg-lb unit of measure.
Operation 3.0 Operation 3.1 DHH-10BT Wireless Scale Operation 3.1.1 Wireless Scale Connection The following sections are for DHH-10BT operation. The sections explain how to connect and operate your wireless scale with the AccuroFit application. 1. Turn on Bluetooth in your smart device’s settings. 2. Download the AccuroFit app. Figure 3-1. AccuroFit App Note The AccuroFit application is available for Apple® and Android™. 3. Create an account and set up a profile. 4.
DHH10-BT 5. Click on “My Body” at the bottom of the screen. Figure 3-3. My Body Screen 6. Click “Connect To Scale”. 7. Make sure you are near the scale. The message, “please select your scale type” will appear. Select “Bluetooth Scale” and press “Continue”. Figure 3-4. Bluetooth Scale Selection Screen Note You must connect to the scale before every weigh-in.
Operation 3.1.2 Wireless Scale Operation 1. To ensure accuracy, place the scale on a hard, flat surface. Make sure there are no objects beneath the scale before weighing. 2. Make sure other smart devices in the area that also have the AccuroFit app installed have Bluetooth turned off (the smart device closest to the scale will receive the new weight measurement). 3. Open the AccuroFit app and navigate to the “Weight” screen by clicking “My Body”. 4. Make sure Bluetooth on your smart device is turned on.
DHH10-BT 3.1.3 Wireless Scale Troubleshooting If you are having difficulty operating with wireless, there may be an issue with Bluetooth connection or app and wireless scale connection. Bluetooth Connection Failure Turn Bluetooth OFF and then ON on your smart device to re-establish the connection. If the problem persists, restart your smart device. App and Wireless Scale Connection Failure Make sure your smart device is within range of the scale and your Bluetooth is turned ON.
FCC Statement 4.0 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.