® Serial No.
1. STANDARD SPECIFICATION 2. SAFETY PRECAUTIONS Portable transmitter with two replaceable 7,2 volt NiCd batteries, neck and waist straps. % Receiver with NBB adapter plate for fastening purposes (PNN-BUS-3), receiver with 4 fixing angles (PNN-BUS-5), with 1 mounting bracket (PNN-R-10) or with integrated mounting holes (PNN-R-6, -16, -CAN and PNN-Compact). % Multi-pin connecting cable for the receiver according to your specifications.
. BATTERY CHARGER Steady light of the green LED (if existing): The battery charger is ready for use. Place the battery in the charger. If the battery is totally discharged, the yellow LED flashes slowly during pre-charging. Steady light of the yellow LED: The battery will now be charged. The yellow LED flashes quickly: The charging process is finished. No harm will come to the battery if it is left in the charger beyond the required charging time.
6. OPERATING THE UNIT Safety equipment in the NBB-radio remote control: In the transmitter, this comprises mainly: % EMERGENCY STOP with automatic disconnection of the power supply. % Automatic zero positioning. In the receiver: % Two diversity units for evaluation of the EMERGENCY STOP signal. % Automatic zero setting when switching back on after radio interruption. % Locking of the radio commands at relay level in the event of a defective EMERGENCY STOP circuit.
Checking the LED at the receiver PNN-R-16 and PNN-R-CAN: LED RADIO ON SERVICE PLUG The Green LED flashes: RADIO PRESENT. If the LED fails to come on: 1. Check that the transmitter is on. 2. Check the power supply of the receiver. 3. (Optional) Irregular flashing of the LED: Check or change the current radio channel. Service plug: Information about this programming plug see customized specifications in the annex. 8.
TECHNICAL DATA ® Operating ambient temperature -20 to +65 °C Insulation class - Protection IP 65 TRANSMITTER Nano-L Transmission frequency range 400 - 477 MHz, 25kHz FM The use of synthesizer technology permits frequencies to be selected in accordance with the appropriate waveband for the country of use. Low frequency modulation FSK signal to CCITT V.23 Data repetition rate about 60 ms Baud rate 1200 baud (bits per sec.
APPROVALS AND CERTIFICATES ® Obtainable at demand: Federal Approvals Office For Telecommunications Of The Federal Republic Of Germany APPROVAL CERTIFICATE No. G120912F S-DE96A0 TYPE-EXAMINATION CERTIFICATE No. G129014H S-EM01A0 05.10.1995 26.08.1996 telefication Certificate EC type-examination Statement of Opinion No. TRQ/97213021/AA/00 S-DE96A0 No. 01214115/AA/00 S-DE96A0 19.11.1997 19.06.2001 TÜV Certificate No.