® Receiver Type / Version Transmitter Type / Version Factory No. Factory No.
1. STANDARD SPECIFICATION % % % Portable transmitter. Receiver with integrated mounting holes. Multi-pin connecting cable for the receiver according to your specifications. The actual delivery specification is as detailed on the confirmation of order or the delivery note accompanying the goods! 2. SAFETY PRECAUTIONS Even if you are accustomed to working with radio control systems, read these operating instructions carefully before using this equipment.
8 Operation: The red dot flashes. L Quickly flashing: Batteries are nearly empty. Transmitter can be operated for appr. 30 minutes more. When the letter "L" flashes quickly on the Planar display, the batteries (rechargeable or not rechargeable) are nearly empty. The transmitter can be operated for approximately 30 minutes more in this condition.
. Base Unit for Planar-B, Planar-C and Planar-D When a transmitter is operated with AA Mignon 1,2 V NiMH rechargeable batteries, these batteries automatically charge inside the transmitter in the optional base unit. To start the charging process simply slide the transmitter into base unit (see image 1). An automatically controlled charging process keeps batteries from over-charging. Base unit has to be connected to a power supply (optional also with dc-charger) – (see image 2).
4. RECEIVER R-16, R-CAN Compact-M, Compact-V R-16 Mounting possibility of the receiver R-16, R-CAN or the Compact-M. R-CAN Compact-M Compact-V The receiver is connected to the unit to be controlled with the multi-pin connecting cable supplied.
5. OPERATING THE UNIT Safety equipment in the NBB-radio remote control: In the transmitter, this comprises mainly: RADIO ON / HORN CHANNEL % STOP (transmitter ON/OFF) with automatic disconnection of the power supply. % Automatic zero positioning. In the receiver: L. STOP STOP % Automatic zero setting when switching back on after radio interruption. % Locking of the radio commands at relay level in the event of a defective STOP circuit.
6. FUNCTION CHECK To maintain operational safety, a regular function check of the NBB radio remote control is necessary. In single-shift day-to-day operation, we recommend performing this check at least once a week. Checking is possible using the display lights provided on the receiver. To do so, the transmitter must be set to the ready-to-operate state. % First connect just the receiver - the transmitter remains switched off.
7. RATING PLATES The rating plates state the type of transmitter or receiver, the factory number, the frequency range and the approval number for non EU countries. Always state the factory number in all your queries. Example: Transmitter Type / Version: Planar-B (or C or D) Factory No.: 999 899 4990 Frequency: 915 -916.65 Mhz Receiver Type / Version: Compact-V Factory No.: 999 899 4990 Frequency: 915 -916.65 Mhz 8. MAINTENANCE Your NBB radio remote control is largely maintenance-free.
11. US-FCC and CANADA IC USA: NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
TECHNICAL DATA ® Operating ambient temperature -20 to +70 °C Insulation class - Protection IP 65 TRANSMITTER Planar-B, Planar-C, Planar-D Transmission frequency range see product label The use of synthesizer technology permits frequencies to be selected in accordance with the appropriate waveband for the country of use. Low frequency modulation GFSK Data repetition rate about 15 ms / 60 ms Baud rate 1200 - 9600 Baud (Bit / sec.
APPROVALS AND CERTIFICATES ® USA FCC ID: SJ7BCD915 CANADA IC: 2634B-BCD915 © NBB Controls + Components AG Otto-Hahn-Straße 3-5 DE-75248 Ölbronn-Dürrn Tel.: 0 72 37 / 9 99 - 0 Fax: 0 72 37 / 9 99 - 1 99 eMail: sales @ nbb.de http://www.nbb.de We reserve the right to alter specifications without notice. Bedienungsanleitung Planar-B, -C, -D, USA, Kanada, 915 Mhz, englisch, Teile-Nr. 3.150.1340, Stand 06.