Portable CD Player with AM/FM Stereo Radio NPB-251 Instruction Manual Please read carefully before use and keep for future reference.
Table of Contents Thank You...................................................................... 3 Using the AUX Input.....................................................13 In the Box....................................................................... 3 Warnings and Precautions...........................................14 Before You Start............................................................ 4 Specifications...............................................................18 At a Glance.......
Thank You In the Box We know you have many choices when it comes to technology; thank you for choosing us here at Naxa Electronics. Established in 2001 in Los Angeles, California, we are dedicated to delivering products that entertain and delight. Please take a moment to make sure that you have everything in the list below. Although we make every effort to ensure that each Naxa device is securely packed and sealed, we know a lot can happen in between us and you.
Before You Start Please take note of the following before you start. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO DOT REMOVE COVER (OR BACK). NO USER SER•• Do not block the ventilation openings or holes. VICEABLE PARTS INSIDE, REFER SERVICING TO QUALI•• Avoid installing the unit in locations described be- FIED SERVICE PERSONNEL. low: WARNING: Remove batteries if exhausted or if they will •• Places exposed to direct sunlight or close to not be used again for a long period.
At a Glance 1 REP key Repeat. Press to change the playback mode (repeat, random). 2 STOP key Stop. Press to stop playback. 3 PROG key Program. Press to enter Program mode in order to create a custom playlist. 4 REW key Previous/Rewind. Previous: Press to skip to the previous track. Rewind: Press and hold to scan quickly in reverse through the current track. 5 PLAY key Play/Pause. Press to start, pause, or resume playback. 6 FF key Next/Fast Forward. Next: Press to skip to the next track.
9 Program indicator Lights up when a program playlist is playing. 10 Repeat indicator Lights up when the player is in repeat playback mode. 11 CD compartment Load compact discs here. The label side should face up. Never open the compartment while a CD is playing or spinning! Page 6 12 LED screen Displays player status information. 13 Play indicator Lights up during playback. 14 FM antenna Extend the antenna fully and adjust its position to optimize FM radio reception.
www.naxa.com 16 AUX Input jack Play audio from a device that is connected to this 3.5mm input jack. 17 Volume dial Turn the dial to adjust the volume level. 18 Radio Tuning dial Turn the dial to tune to a radio station. The frequency scale is printed on the dial. 19 FUNCTION switch Set the switch to the position of the desired function mode (CD, AM, FM, OFF). Set the switch to OFF to turn the player off.
Connect Power The unit can be powered by AC household power, or by batteries. AC Power This unit operates on AC 120 V ~60 Hz power. Battery Power Install 6 UM-2 “C” size batteries to enjoy music wherever you are. 1. Remove the lid from the battery compartment [15] found on the bottom of the main unit. With the included AC power cable, connect the AC 2.
Basic Functions Using the Radio Turning the Unit On and Off Set the FUNCTION switch [19] to the AM or FM position to start using the radio. To turn the unit on, set the FUNCTION switch [19] to 1. Select a frequency band. one of the function positions (e.g., CD, AM, FM). The •• To listen to AM stations, set the FUNCTION LED screen [12] will light up. switch [19] to the AM position. To turn the unit off, set the FUNCTION switch [19] to •• To listen to FM stations, set the FUNCTION the OFF position.
Using the CD Player Set the FUNCTION switch [19] to the CD position to start using the CD player. About Compact Discs Loading a Disc 1. Open the CD compartment [11]. Lift up from the CD door latch found towards the front of the player. 2. Load a compatible disc. Place the CD into the comThis player is compatible with all digital audio CDs, partment with its label facing up. digital audio CD-Recordable discs (CD-R) and CD-Re- 3. Close the CD compartment [11].
Playing a Disc With a compatible disc in the CD compartment [11]: •• Press the PLAY key [5] to start playback. •• Play will start from track 1 and the Play indicator [13] will light up. •• To pause playback, press the PLAY key [5] while a disc is playing. •• The LED screen [12] will flash the track number. •• Press the PLAY key [5] again to resume playback. •• To stop playback, press the STOP key [2]. •• To select a track to play: •• Press the FF key [6] to skip to the next track.
Programming a Playlist When the CD is stopped, you can select up to 20 CD tracks to play in any order that you choose. 1. Press the STOP key [2] to make sure that playback has stopped. 2. Press the PROG key [3]. The LED screen [12] will flash “01” and the Program indicator [9] will flash. 3. Use the REW or FF keys [4, 6] to choose a track to enter into the playlist. 4. Press the PROG key [3] to save the track into the playlist. The LED screen [12] will then flash the next playlist track number (e.g., “02”).
Using the AUX Input Set the FUNCTION switch [19] to the CD position to play devices connected to the AUX Input jack [16]. 1. Connect the audio source to the player. Use an optional audio patch cable to connect the 3.5mm headphone or line-out jack of the audio source to the 3.5mm AUX Input jack [16] found on the rear of the player. 2. Prepare the player. Set the FUNCTION switch [19] to the CD position. Turn the VOLUME dial [17] to lower the volume level. 3. Prepare the audio source.
Warnings and Precautions On Protection Against Laser Energy Exposure • • • • The lightning flash with arrowhead symbol within an equilateral triangle is intended to aler the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of significant magnitude to constitute risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and servicing instructions in the literature accompany
Important Safety Information 1. Read Instructions: All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions: The safety and operating instructionshould be retained for future reference. 3. Heed Warnings: All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions: All operating and usage instructions should be followed. 5. Cleaning: Unplug this product from the wall outlet before cleaning.
ing structure,grounding of the lead-in wire to an antenna-discharge unit, size of groundingconductors, location of antenna-discharge unit, connection to groundingelectrodes, and requirements for the grounding electrode (see figure). 15. Lightning: For added protection for this product, unplug it from the walloutlet and disconnect the antenna or cable system during a lightning stormor when it is left unattended and unused for long periods of time.
23. Wall or Ceiling Mounting: The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 24. Heat: The product should be situated away from heat sources such as radiators,heat registers, stoves, or other products (including amplifiers) thatproduce heat. FCC NOTICE This device complies with Part 15 of the FCC Rules.
Specifications Power requirements AC 120 V ~60 Hz DC 9 V (6 x UM-2 “C” batteries) Weight 2.4 lbs Dimensions 8.0 x 9.0 x 5.0 in (LWH) Media Support CD, CD-R/RW Media Formats CD-audio Receiving Bands AM, FM Tuning Range AM 530 – 1710 KHz FM 87.5 – 107.9 MHz Audio output Max 1.2 W x 2 (2.4 W total) Input 3.5mm AUX audio Support If you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at www.naxa.
www.naxa.
