User Manual

Kno
w The Device
NaviTech regulated power supply is a simple, accurate DC power source with full indicated power.
It provides power source for factory maitenance, calibration positions, and can be integrated into
test&equipment cabinet. It powers the DIY circuit in our work bench at home and is also a
necessary tool for educational institute particularly for those involve electronics and
Featues and Technical Specifications
a. Features:
High as 80% power effici
encey
A secondary voltage stabilizati
on circuit through MOS ensuring a superb voltage output
F
ull angle protection include overload,overheating, Overvoltage, Short-circuit Protection etc.
Smal
l size as 3U high appropriately fit for work station or test equipment cabinet.
b
. Technical Sp
ecifications
110V/220 switch
3-Pin power Jack
220
Turn the 110V/220V switch at back of power supply to a correct position according to
your local voltage standard,before Plugging in the power cord.
For Safety Use
1) The device is intended for indoor use only.
2) ÿÿDo not open to repair the device or it will void the warranty
3) Do not use the device in a damp environment
4) Keep the device away from heat or water, magnetic field.
5) Keep the device and all loose parts (if any) away from children, pets and unauthoried
persons.
6) Don't sharply bend, cut, extend knot, step on or pull the cord but on the plug when
disconnecting the power cables.
You are kindly suggested to follow the tips below carefully when operate this unit
telecommunications majorities.