Installation and User Instructions Smart Probe Version 3 1 Feb 2021 Version 2.
DISCLAIMER Navitas Digital Safety Ltd makes no representations or warranties with respect to this manual and, to the maximum extent permitted by law, expressly limits its liability for breach of any warranty that may be implied to the replacement of this manual with another. Furthermore, Navitas Digital Safety reserves the right to revise this publication at any time without incurring an obligation to notify any person of the revision.
General Notice: Some product names used in this manual are used for identification purposes only and may be trademarks of their respective companies. Product Modifications Year Type Modifications Document Revisions Date Version Number Document Changes 27-07-2020 1.0 Initial draft 18-02-2021 2.0 Added IC and ICC warnings Approvals This document requires following approvals: Name Title Paul Elton Chief Operating Officer 3 Feb 2021 Version 2.
Table of Contents 1 PREFACE 7 1.1 Description of the User 7 1.2 Explanation of Safety Warnings 8 1.3 Retaining Instructions 8 1.4 Obtaining Documentation and Information 1.4.1 Internet 1.4.2 Ordering Documentation 1.4.3 Documentation Feedback 1.4.4 Support and service 2 DESCRIPTION OF THE PRODUCT 9 9 9 9 9 10 2.1 Intended Use and Reasonably Foreseeable Misuse 10 2.2 Geographical Restrictions 10 2.3 Technical Data 10 2.4 Product Compliance 11 2.
3.1.7 3.1.8 3.1.9 Maintenance safety information Service and repair safety information Safe Disposal 14 14 15 3.2 Graphical Symbols 3.2.1 Explanation of safety information on the packaging and product 18 18 4 19 PREPARATION OF THE SMART PROBE 4.1 How to Install the Product 4.1.1 Unpacking the product 4.1.2 Packaging contents 4.1.3 Charging the Smart Probe 4.1.4 Switching on/off the Smart Probe 4.1.5 Configuring the WiFi connection 19 19 19 20 21 22 5 26 USING THE SMART PROBE 5.
7.1 How to Identify and Solve Problems 7.1.1 User Troubleshooting 55 55 8 56 DISPOSAL 1. 2. Disposal of electronic components Disposal of packaging waste 56 56 3. APPENDIX I – SUPPLIED ACCESSORIES, CONSUMABLES AND SPARE PARTS 57 a. Supplied accessories 57 6 Feb 2021 Version 2.
Smart Probe User Manual 1 PREFACE 1.1 Description of the User The Smart Probe 3 is intended for use by staff within commercial kitchen environments to probe and record the temperature of food items. It is not intended for domestic use.
Smart Probe User Manual 1.2 Explanation of Safety Warnings Danger indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury Warning indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. Caution indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. Indicates information considered important, but not hazard-related. 1.
Smart Probe User Manual 1.4 Obtaining Documentation and Information 1.4.1 Internet The latest version of the documentation is available at the following address: https://support.navitas.eu.com 1.4.2 Ordering Documentation Documentation, user instructions and technical information can be ordered by calling Navitas Digital Safety Ltd at 0808 164 3773. 1.4.
Smart Probe User Manual 2 Description of the product 2.1 Intended Use and Reasonably Foreseeable Misuse The Smart Probe is intended to be used as digital food temperature probe. The Smart Probe enables the taking of hot and cold food temperatures using a separately available needle as well as taking surface temperatures using the in-built Infrared sensor.
Smart Probe User Manual Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates 100mW Complies with 802.11 a/b/g/n/ac Weight 350 grams Performance data Operating temperature -10 to 55 degrees Celsius Supply data for power, gas, water and other consumables (for example detergents, lubricants) 5V DC 2A Table 1. Technical Data 2.
Smart Probe User Manual 2.5 Product elements a. Power/Action – This button turns the unit on/off when held for 3 seconds. During operation pushing this button for short bursts performs actions. b. Charge Port – for connecting the supplied power charger and additional, optional Food Needle. c. Camera – Integrated camera d. Infrared Sensor – Integrated infrared sensor for reading surface temperatures e.
Smart Probe User Manual 3 Safety Instructions Read and understand this manual and its safety instructions before using this product. Failure to do so can result in serious injury or death. 3.1 How to Use the Product Safely 3.1.1 • • • • • 3.1.2 • • • • • • • Safety information for vulnerable people This product is intended for professional use only. Do not use this product at home or in an untrained environment The product is not designed for use by children.
Smart Probe User Manual 3.1.3 • 3.1.4 • • • 3.1.5 • • 3.1.6 • • 3.1.7 • • • 3.1.8 • Safety information related to the use of the product in residential areas The Smart Probe has been tested and is compliant with safety standards for electromechanical devices. If handled properly and according to the Safety Instructions and the User Manual, the Smart Probe is safe to use.
Smart Probe User Manual 3.1.9 • Safe Disposal Follow the instructions in the section "Disposal" in this User Manual for safe disposal of the Smart Probe. 3.2 IC Caution 3.2.1 RSS-Gen Issue 3 December 2010"&"CNR-Gen 3e édition Décembre 2010: This device complies with Industry Canada licence-exempt RSS standard(s).
Smart Probe User Manual 3.3.3 15.105 Information to the User Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Smart Probe User Manual 3.3.6 FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Smart probe FCC ID: 2AYVU-SP3 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the body is 0.1291W/kg. This device was tested for typical portable device operations . To maintain compliance with FCC RF exposure requirements.