B20 Quick Guide Bluetooth Enabled GPS Receiver English Main Features • 20 parallel satellitetracking channels for fast acquisition and reacquisition. • Supports NMEA0183 v2.2 or v3.0 data protocol or SiRF binary code. • 100% compatible with Bluetooth™ Serial Port Profile (SPP). • Bluetooth™ version 1.2 compliant. Draws power from car battery; no power adapter required.
Instructions for First Use 1. Insert the Receiver • Insert the GPS Receiver into your car’s lighter slot. • Slide the power switch to the ON position. 2. Switch on the Power 3. Establish Bluetooth Link To link the receiver with a PDA (Personal Digital Assistant), follow these steps: • Activate the Bluetooth Manager, select Search and then link. • Select the “NAVMAN GPS “icon and choose SPP slave to establish the Bluetooth link.
Warning Do not place the B20 under strong sunlight for a long time. Do not place it in a hightemperature environment, or near heat radiating devices such as a stove or radiator. Doing so will cause the device to malfunction. Notes: 1. It is prohibited to operate this system while driving your car. 2. GPS signals are unable to go through non-transparent objects, such as tall buildings, tunnels, underpasses, and forests. Bad weather may also effect the signal reception.