Nature's Generator Powerhouse User Manual TYPE-C QC3.
Nature's Generator Powerhouse Contents Important Safety Instruc�ons Warning Cau�on 1 1 2 Introduc�on Unpack Your Nature's Generator Powerhouse Get to Know Your Nature's Generator Powerhouse 3 3 4 Using Your Nature's Generator Powerhouse How to Assemble Your Nature’s Generator Powerhouse How to Recharge Your Nature's Generator Powerhouse How to Use Your Nature's Generator Powerhouse How to Expand the Capacity of Your Nature's Generator Powerhouse How to Maintain and Store Your Nature's Generator Powerhou
Important Safety Instructions 1. Read these instruc�ons. 2. Keep this user manual in a safe and accessible place. 3. Take note of all warnings. 4. Follow all instruc�ons. 5. Do not use this apparatus near water. 6. Do not block any ven�la�on openings. 7. Do not use near flammable gases or fumes or other apparatus that produce a large amount of heat. 8. Only use a�achments/accessories approved by the manufacturer. 9. Only use with the wheels and handles approved by manufacturer, or sold with product.
Replacement Parts When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteris�cs as the original part. Unauthorized subs�tu�ons may result in fire, electric shock, personal injury, or other hazards.
Introduction Congratula�ons on your new Nature's Generator Powerhouse, a state-of-art generator that provides reliable power for emergencies, off grid living, or wherever power is needed. Unpacking Your Nature’s Generator Powerhouse 1. Nature's Generator Powerhouse Generator 2. Nature’s Generator Powerhouse Ba�ery Storage 3. AC Power Cord 4. This User Guide 3 Visit Naturesgenerator.
Get to Know Your Nature’s Generator Powerhouse Front Panel Solar Input: To connect with Nature's Generator Powerhouse Power Panels. This Anderson port is designed to be used with up to 2000 wa�s of solar power. QC 3.0 Output: To provide QC 3.0 quick charge. Type-C Output: To provide Type-c charge. Main Power Switch: Turns on or off the main power to your generator LCD Display: To show the informa�on of the system. AC Output Switch: Turns on or off all the AC outlets on the front of the generator.
Back Panel Grounding Terminal: To Ground Nature's Generator Powerhouse. Some electrical devices might require grounding before use. EXPANSION IN Port: Daisy chain connector. It connects Nature’s Generator Powerhouse Power Pod (sold separately) BATTERY GENERATOR Port: To connect Nature's Generator Powerhouse Ba�ery Storage. Dry Contact Port: To communicate with the other generator. AC Input: To connect to the wall outlet using the included power cord. 5 Visit Naturesgenerator.
How to Read the LCD Display Input Grid: Displays the informa�on of the input from grid. Input Solar: Displays the informa�on of the input form solar panel(s). Input Wind: Displays the informa�on of the input from wind turbine(s). Input kw: Displays the input wa�age in w (wa�s) or kw (kilo wa�s). Input V: Displays the input voltage in volts. Input A: Displays the input current in amps. Input Hz: Displays the input frequency in hertz. Battery Bar: Indicates the ba�ery level in 8 increments.
Protection Code E02: The Nature’s Generator Powerhouse has been protected from high temperature. E03: The Nature’s Generator Powerhouse has been protected from high voltage of ba�eries. E04: The Nature’s Generator Powerhouse has been protected from low voltage of ba�eries. E05: The Nature’s Generator Powerhouse has been protected because of the short circuit of the inverter. E06: The Nature’s Generator Powerhouse has been protected because the output voltage from the inverter is too high.
Using Your Nature’s Generator Powerhouse How to Assemble Your Nature’s Generator Powerhouse 1. Gently move your Nature’s Generator Powerhouse Ba�ery Storage to the desired loca�on. Please be aware that two wheels have breaks. Release the breaks before you start moving Nature’s Generator Powerhouse Ba�ery Storage. 2. Team li� Nature’s Generator Powerhouse Generator and place it on top of the Nature’s Generator Powerhouse Ba�ery Storage. Make sure they are aligned Properly.
How to Recharge Your Nature’s Generator Powerhouse Recharging from Nature’s Generator Powerhouse Power Panels (sold separately): 1. Place your Nature’s Generator Powerhouse Power Panels where they will get as much direct sunlight as possible. While direct sunlight is always preferred, the power panels will also send a small amount of charge to your Powerhouse during hazy or overcast sky condi�ons. 2. Connect two Nature's Generator Powerhouse Power Panels in series.
4. Insert Power Panel Cable plug into Solar Input port on the front of your Nature's Generator Powerhouse. You will know it is recharging when LCD display lights up, solar panel icon is illuminated, and ba�ery bar starts running. The ba�ery bar will stop running when the ba�ery is full or there is not enough power from Nature's Generator Powerhouse Power Panels. 5. It usually takes about 8 to 15 hours to recharge the Nature's Generator Powerhouse if using two Nature’s Generator Powerhouse Power Panels.
Recharging from the Nature’s Generator Powerhouse Wind Turbine (sold separately): 1. Place your Nature's Generator Powerhouse Wind Turbine where it will get sufficient wind. 2. Follow the manual of Nature’s Generator Powerhouse Wind Turbine to set up the wind turbine. 3. Insert the wind turbine cable connector into Wind Input port on the front of your Nature's Generator Powerhouse. You will know it is recharging when LCD display lights up, wind turbine icon is illuminated, and ba�ery bar starts running.
How to Maintain and Store Your Nature’s Generator Powerhouse Turn off the main switch and AC switch when your Nature’s Generator Powerhouse is not in use. Recharge your Nature's Generator Powerhouse once every four months and store it in a ven�lated, cool and dry loca�on. This keeps the ba�ery healthy and prolongs its life. Failure to maintain Nature's Generator Powerhouse by these steps can result in ba�ery damage which will void the product warranty.
My AC device(s) are not powering up from my Nature’s Generator Powerhouse. Please follow these steps: 1. Verify your device is suitable for use with your Nature's Generator Powerhouse. The Nature's Generator Powerhouse Line 1 and 2 outlet works only with 240V AC 30A maximum. (7200 wa�s). Line 1 or Line 2 outlets work only with 120V AC 30A maximum (3600 wa�s). Some devices might require grounding`before they can be used. Ground Nature's Generator Powerhouse before power this type of devices. 2.
Technical Specifications Battery: Type: AGM Sealed Lead Acid Capacity: 48V 100Ah (4800Wh) Self-discharge: Recommend to recharge every 4 months Inverter: Output Power: 7200 wa� max Output voltage: 120V/240V Split Phase Output frequency: 60Hz Output Sine Wave: Pure sine wave Output Phase: Split phase Ports: USB Output: QC 3.0 Type-C Output: PD3.
Limited Warranty One Year Limited Warranty Natures Generator Inc. warrants to you, the original purchaser of this new product, that the product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the original date of your purchase of the product (“Warranty Period”). This product must be purchased from an authorized dealer and packaged with this warranty statement. This warranty does not cover refurbished product.
What does the Warranty not Cover? This warranty does not cover: • Cosme�c damage • Damage due to force majeure, such as lightning strikes, fire, flood, etc.. • Accident • Misuse • Abuse • Negligence • Commercial use • Modifica�on of any part of the product • Damage due to incorrect opera�on or maintenance • Connec�on to an incorrect voltage supply • A�empted repair by anyone other than a facility authorized by Natures Generator Inc.
V1.
Nature's Generator Powerhouse Wind Turbine User Manual
Nature's Generator Powerhouse Wind Turbine Contents 1 Welcome Important Safety Instruc�ons Warning Cau�on 1 1 2 Introduc�on Unpack Your Nature's Generator Powerhouse Wind Turbine Get to Know Your Nature's Generator Powerhouse Wind Turbine 3 3 4 Using Your Nature's Generator Powerhouse Wind Turbine How to Choose the Loca�on How to Choose the Tower How to Install Your Nature's Generator Powerhouse Wind Turbine How to Use Your Nature's Generator Powerhouse Wind Turbine 7 7 8 8 12 Maintenance 14 Troub
Welcome Congratula�ons on the purchase of your new Nature’s Generator Powerhouse Wind Turbine, a state-of-art wind turbine that recharges your Nature’s Generator Powerhouse or Nature’s Generator Powerhouse Power Pod with wind power. Please read these instruc�ons thoroughly prior to installa�on, then store this manual in a safe place for future reference. If at any �me you have ques�ons about this product, or require addi�onal assistance, please do not hesitate to email us at support@naturesgenerator.
Replacement parts When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteris�cs as the original part. Unauthorized subs�tu�ons may result in fire, electric shock, personal injury, or other hazards.
Unpack Your Nature's Generator Powerhouse Wind Turbine 1. Nature’s Generator Powerhouse Wind Turbine main body 2. Hub 3. Nose cone 4. Blades x 3 5. 100-foot-long wind turbine cable Visit NaturesGenerator.
6. Controller box 7. This user manual 8. Accessory bag that includes. M8 bolt x 7 (1 spare pieces) M8 nut x 7 (1 spare pieces) M8 lock washer x 7 (1 spare pieces) M20 lock nut x 1 M20 lock washer x 1 Rubber pad x 1 Hex key 8mm Hex key 6mm Gasket Ground line 4 Visit NaturesGenerator.
Get to Know Your Nature's Generator Powerhouse Wind Turbine Blade × 3 Main Body Hub M8 Bolt × 6 Nose Cone M8 Nut × 6 M20 nut M8 Bolt × 4 M8 Nut × 4 Gasket Rubber Pad × 1 M8 flat washer × 6 M20 lock washer Pipe (not included) Controller box TYPE-C QC3.
Grounding Every wind turbine and turbine tower need to be grounded at the tower base. Grounding the tower at its base may help prevent shocks to persons touching the tower due to lightning or electrical faults. Please take the �me to review the Na�onal Electrical Code (NEC) and local building and zoning regula�ons for complete requirements. Your Nature’s Generator Powerhouse Wind Turbine has a grounding cable included for this purpose.
Using Your Nature's Generator Powerhouse Wind Turbine How to choose the location The wind speed has drama�c effects on your Nature’s Generator Powerhouse Wind Turbine. The loca�on should be carefully considered to achieve the op�mal performance of your Nature’s Generator Powerhouse Wind Turbine, prior to the moun�ng of your Nature’s Generator Powerhouse Wind Turbine.
How to choose the tower Your Nature’s Generator Powerhouse Wind Turbine is designed to mount on nominal 1.5 inch schedule 40 steel tubing or piping. The outside diameter of the tubing or piping shall be around 1.875 inch to 1.900 inch. The steel tubing or piping should be available through your local hardware store. Under no circumstances should plas�c pipe be used to construct a tower. Towers must be capable of withstanding 270 pounds of load in the horizontal direc�on at the wind turbine.
Step 3: The rubber gasket that is stored inside of the yaw and the included rubber pad will help to prevent the the yaw from contac�ng the pipe directly. The rubber gasket and rubber pad will assist in reducing the transmission of noise and vibra�on down the pipe. Slide the yaw sha� all the way down over the top of the pipe and be careful not to pinch the cable. There may be some slight variances of the thickness or size of the pipe from different makers or models.
Step 5: Place one of the blades on one of the hub sockets. Place a lock washer and then a flat washer on the bolt and then insert the bolt through the blade and the socket. Place a nut on the other side of socket and �ghten the bolt with the 5mm hex key. Repeat this process on all three blades. Make sure the lock washer and flat washer are placed in the right order. The blades will become loose if they are not installed properly.
Step 7: Insert the 8mm hex key into the rotor sha�. Hold the blade assembly and �ghten the M16 nut by turning the 8mm hex key counter clockwise. It is recommended to use a hex key extender (not included) that provides more leverage to �ghten the lock nut. Finally, spin the blades slowly to be sure they turn freely and the hub does not move in along the rotor sha�.
How to Use Your Nature’s Generator Powerhouse Wind Turbine Step 1: Connect the wind turbine cable to the round connector from one side of the controller box by pushing and twis�ng the connectors. Step 2: Connector the square connector from the other side of controller box to your Nature's Generator Powerhouse's or Nature's Generator Powerhouse Power Pod's “WIND INPUT” port. TYPE-C QC3.
Step 3: For use with Nature’s Generator Powerhouse. When your Nature's Generator Powerhouse Wind Turbine spins at a certain speed, you will see that the whole display on your Nature's Generator Powerhouse lights up if your Nature's Generator Powerhouse main power is switched off. This means your Nature's Generator Powerhouse Wind Turbine is recognized by your Nature's Generator Powerhouse, but it is not yet powerful enough to recharge your Nature's Generator Powerhouse.
MAINTENANCE Your Nature’s Generator Powerhouse Wind Turbine has been designed to run for long periods without requiring any maintenance. Performance will be enhanced if you periodically inspect your system. Review the following simple maintenance procedures and implement every six months. Caution: Do not go near the wind turbine during operation. • Check blades for superficial damage. Replace blades if damaged.
Technical Specifications Material: Wind turbine blades: fiberglass nylon composite Wind turbine body: cast aluminum alloy with powder coa�ng Wind turbine cable: 12AWG pure copper cable Connectors: Wind turbine cable connectors: weatherproof M19 3P connectors. Wind input connectors: Anderson connectors. Yaw: fits 1.5 Inch schedule 40 pipes or towers Power Ra�ng: Rated power: 350 wa�s @ 27 MPH Maximum wind speed 110 mph General: Rotor diameter: 63 in / 1.
Limited Warranty One Year Limited Warranty Natures Generator Inc. warrants to you, the original purchaser of this new product, that the product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the original date of your purchase of the product (“Warranty Period”). This product must be purchased from an authorized dealer and packaged with this warranty statement. This warranty does not cover refurbished product.
What does the Warranty not Cover? This warranty does not cover: • Cosme�c damage • Damage due to force majeure, such as lightning strikes, fire, flood, etc.. • Accident • Misuse • Abuse • Negligence • Commercial use • Modifica�on of any part of the product • Damage due to incorrect opera�on or maintenance • Connec�on to an incorrect voltage supply • A�empted repair by anyone other than a facility authorized by Natures Generator Inc.
V1.
