Warranty

How to Connect Your Nature's Generator Power Pod to Nature’s Generator
You can connect your Nature's Generator Power Pod to your Nature’s Generator to extend the
overall run me.
1. Open the top cover of the Nature's Generator Power Pod, locate the expansion cable, and run
the expansion cable out of Nature's Generator Power Pod through the opening on the back of the
Nature's Generator Power Pod.
2. Locate expansion port on the back of your Nature’s Generator and open the rubber cover.
3. Connect the expansion cable to the expansion port. Due to the amount of voltage running
between the Nature's Generator and Nature's Generator Power Pod, this is a very ght fit to
ensure no electrical shock while connecng.
4. The Expansion (chain link) Icon will be illuminated on the display of Nature’s Generator to
indicate Nature's Generator Power Pod is connected.
You will experience an increased run me of approximately 167% by adding one Nature's
Generator Power Pod, approximately 333% by adding two Nature's Generator Power Pods and
500% by adding three Nature's Generator Power Pods.
How to Maintain and Store Your Nature’s Generator Power Pod
Please recharge your Nature's Generator Power Pod once every four months and store in a
venlated, cool and dry locaon. If possible, please connect your Nature's Generator Power Pod
to the solar panel while in storage to top off the baery voltage. This keeps the baery healthy
and prolongs its life. Failure to maintain Nature's Generator Power Pod by these steps can result in
baery damage which will void the product warranty.
Please clean your Nature's Generator Power Pod with a so, lint-free cloth. If your Nature's
Generator Power Pod is especially dirty, moisten a so, lint-free cloth in a weak detergent soluon,
squeeze the excess moisture from the cloth, then wipe the cabinet with the cloth. Use a clean cloth
to dry your Nature's Generator Power Pod.
Troubleshoong
My Nature’s Generator Power Pod won’t charge when I connect my solar panel to it.
Please follow these steps.
1. Make sure the solar panel is pointed directly toward the sun. It is preferred to posion the solar
panel facing south. The solar panel may produce lile or no power if it is posioned in shade.
2. Check the cable connecon on your Nature's Generator Power Pod and make sure it is properly
connected.
3. If the LEDs light up, but are not running. It means Nature's Generator Power Pod is being fully
charged by the solar panel or solar panel does not have high enough voltage to recharge the
Nature's Generator Power Pod.
14
Visit Naturesgenerator.com for More Information