User's Manual

ManualsBrandsNational Electronics & Watch ManualsElectronicsSmart Gear

National Electronics & Watch Co, Ltd.

User Guide

(M13-963SW123)

Bluetooth Smart Gear device

Introduction

Thank you for purchasing the Bluetooth (BLE 4.0) Fit Band OLED display. This product can record

your Exercise time, Calorie, Distance, Pace; Speed, Steps and Sleep that will track your total

sleep time, light sleep, deep sleep, wake-up time and target % sleep. It also monitors the weather

and the temperature. It also has a vibration function when there is an incoming call or message.

The product has two (2) buttons on the sides of the screen.

Note that the actual color and artwork may vary from style to style.

How to pair your Smart Gear device with smart phone:

• Press and hold the S1 or S2 button of the Smart Gear device from OFF screen. Or press and

hold S1 button from ON screen (any view). The Bluetooth icon and SYNC will flash

followed with SYNC and status bar scrolling.

While the “SYNC” appears in the Smart Gear device, tap the smart phone App to sync.

Notes:

¾ If pairing is successful, the “OK” and Bluetooth icon appears. After 2-3 seconds, it

will show “PHONE CONNECTED”.

¾ If pairing is unsuccessful, after 1 minute, the “X” and Bluetooth icon appears.

¾ In any mode, press and hold S1 button to turn off the Bluetooth. It will then display

“BLE OFF”.

• Open the Apps by tapping the Smart Gear icon on the Smartphone. The Welcome Smart

Gear screen appears and continue tap as highlighted in red as shown.

• Continue tap the icon highlighted in red of the screen as shown.

User can select the various screens such as, HOME, ACTIVITY, SLEEP and EXERCISE.

Summary of content (7 pages)

PAGE 1
National Electronics & Watch Co, Ltd. User Guide (M13-963SW123) Bluetooth Smart Gear device Introduction Thank you for purchasing the Bluetooth (BLE 4.0) Fit Band OLED display. This product can record your Exercise time, Calorie, Distance, Pace; Speed, Steps and Sleep that will track your total sleep time, light sleep, deep sleep, wake-up time and target % sleep. It also monitors the weather and the temperature. It also has a vibration function when there is an incoming call or message.
PAGE 2
National Electronics & Watch Co, Ltd. Important reminder: • Press S2 button to scroll the different modes; SLEEP, EXERCISE, DATA and SET mode. Before use of the Smart Gear device, you may delete device data through the ff. steps: • Go to MENU screen on your smart phone and tap RECORD highlighted in red as shown. • Tap “Clear all device’s data” and “Clear all my data” on the Smartphone. • Tap “Yes” to confirm.
PAGE 3
National Electronics & Watch Co, Ltd. View your progress Goal CALORIE or STEP EXERCISE mode While doing your exercise, you can view the progress of your Goal Calorie or Goal Steps. • Press S2 button from OFF screen to enter EXERCISE mode. • Press and hold S2 and wait until “HOLD START” stops blinking and release the button to start your exercise.
PAGE 4
National Electronics & Watch Co, Ltd. DATA mode SET How to view the Data • • • • • • Press S2 button from OFF screen to enter DATA mode. Press and hold S2 to enter DAILY data. While DAILY is blinking, press S1 to select EXERCISE data, SLEEP data and DAILY data. Press S2 button to view the data. Press S2 button from display OFF screen to enter SET mode. Press and hold S2 button to enter setting mode.
PAGE 5
National Electronics & Watch Co, Ltd. How to reset the Smart Gear device Size and Weight The user can reset the Smart Gear device by pressing and holding S1 and S2 together for 2-3 seconds. Device size (L x W x T): approx. 69.8 x 16.9 x 7.8 mm. Device weight: approx. 25.0 grams Data Memory Water Resistance Exercise data: 30 files Daily data: 30 days Sleep data: 10 days or 10 files Note that when Memory is full, Memory is managed in First in – First out basis.
PAGE 6
Statement This device complies with Industry Canada licence-exemptRSSstandard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,and (2) this device must accept any interference,including interference that may cause undesired operation ofthe device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.
PAGE 7
   Battery Caution : Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. The product shall only be connected to a USB interface of version USB2.0 Temperature：35℃ Hereby , National Electronics & Watch Co. Ltd ， hereby declares that this Smart Gear is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.