User's Manual

Bluetooth Cracker device
Introduction
Thank you for purchasing the Bluetooth (BLE 4.0) Cracker device. This device can record the
Calories, Steps, Pace, Distance and Sleep that will track your sleep time, light sleep, deep
sleep, and wake-up time. It has one (1) button in the middle.
Note that the actual color and artwork may vary from style to style.
How to sync or pair your Cracker device with smart phone
 Press S1 button from LED OFF to enter SYNC mode (red light appears).
 Press and hold S1 for 2-3 seconds and the red light will flash. Then tap the smart phone App
to pair.
You may follow the function flow as shown.
Notes:
 During the pairing process, the 3 LED’s will flash alternately and once pairing is
successful, the red light will flash.
 If pairing is unsuccessful, the flashing red light will turn OFF.
 Open the Apps by tapping the Smart Gear icon on the Smartphone.
The Welcome Smart Gear screen appears and continue tap as highlighted in red as shown.
 Continue tap the icon highlighted in red of the screen as shown.
User can select the various screens such as, HOME, ACTIVITY, SLEEP and EXERCISE.
Important reminder:
 Before use of the Cracker device, you may delete device data through the ff. steps:
 Go to MENU screen on your smart phone and tap RECORD (highlighted in red as
shown).
 Tap “Clear all saved data on device” then tap “YES” and tap “OK” on the phone.
 Tap “Clear current user data in the app” then tap “YES” and tap “OK” on the phone.
 Tap “Clear all user data in the app” then tap “YES” on the phone.
 Tap “Home” button on the phone.
 Go to “Settings” and turn Bluetooth OFF then turn back ON.