User's Manual

ManualsBrandsNational Electronics & Watch ManualsElectronicsBLE 4.0 Heart Rate Belt

RDY13

User Manual

M12-2753D BLE 5.3k HRM chest belt w/ 3D sensor

Introduction

NEWCO Blutol Heart rate belt using 5.3k RF analog wireless technology is an accessory for

I-phone or other devices with 3D accelerometer motion sensor using BLE 4.0 (Bluetooth Low

Energy version 4.0). It will gather heart rate signals from your body and transmit it to the

phone wirelessly through Bluetooth 4.0 transmission technologies.

Basic parts of the BLUTOL HRM chest belt:

1) Main body (Front)

2) Main body (Back)

3) Strap

Pairing your Heart Rate monitor with the phone

The HRM belt is on standby and ready to send data to your phone. Wear the belt directly on

your skin just below your breastplate. It should be snug enough to stay in place during your

run.

1) Attach the fabric strap to the main body by snapping the button connectors.

2) Wet both electrodes with a damp cloth on the back of the fabric strap. This will help

create a strong electrical connection between your chest and the HRM transmitter.

3) Wrap around the chest belt around your rib cage just below the pectoral muscles and

attach the other end of the strap to the HRM transmitter. The elastic fabric strap should

be adjusted so that it is snug enough so that it will not move during use but not so tight

as to restrict breathing.

Summary of content (4 pages)

PAGE 1
User Manual M12-2753D BLE 5.3k HRM chest belt w/ 3D sensor 3) Strap Introduction NEWCO Blutol Heart rate belt using 5.3k RF analog wireless technology is an accessory for I-phone or other devices with 3D accelerometer motion sensor using BLE 4.0 (Bluetooth Low Energy version 4.0). It will gather heart rate signals from your body and transmit it to the phone wirelessly through Bluetooth 4.0 transmission technologies.
PAGE 2
4) Open the NEWCO HR application by taping its icon on the phone. 7) Tap the “LAP” tab to take a lap. 8) Tap the “Stop” on the phone to pause or halt your activity. How to Set your Personal Information on the Phone 5) 6) Tap the “Pair” or the cross logo the phone. 1) Tap the “Set” to set the different information. 2) User’s have the options to set the following: Units, Gender, Age, Weight, Height and HR Training zones.
PAGE 3
) Tab “OK” to confirm setting and tap “Done” after completing all the settings and it will automatically return to the main screen. 2) Tap “YES” to confirm and “NO” to resume the activity. How to disconnect the HRM on the phone 1) Tap the “Discon.” Tab to disconnect.
PAGE 4
Help functions: If the heart rate data does not appear on the phone Please follow the tips below: 1) 2) 3) 4) 5) 6) 7) Make sure the HR belt is snugly fit to your body. Apply water or electrode gel to the electrode of the HR belt. Clean the electrodes from possible contamination that may interfere with heart rate signals. Wear a cotton shirt or if possible wet your shirt. Synthetic fabrics that rub with your skin may create static electricity and interfere with the heart rate signal.