User's Manual

National Electronics & Watch Co,. Ltd.

RDY13

BLE TEMP iPhone App User Manual

(Preliminary-Subject to change without prior notice)

Ref: BLE TEMP 4.4

About BLE

Bluetooth low energy (BLE) is a feature of Bluetooth 4.0 wireless radio technology,

aimed at new, principally low-power and low-latency, applications for wireless devices

within a short range (up to approx. 10 meters / 32 feet). This facilitates a wide range of

applications and smaller form factor devices in the healthcare, fitness, security and home

entertainment industries.

Features:

This wireless Temperature Tag with build in Bluetooth 4.0 LE system is designed to

measure the temperature and broadcast the temperature data. It can be mounted

anywhere indoor or outdoor. Smart phone such as iPhone 4S, iPhone 5, iPad 3, etc can

pick up data from several sensors and displayed on the screen.

How to turn ON or OFF the NEWCO BLE TEMP Tag

 Press & hold the button shown on the picture above 2 to 3 seconds to turn ON or OFF

the BLE TEMP Tag.

 It will display a green light for 1 second if it is ON.

 While it is ON, it will transmit the Temperature data to the iPhone continuously until

you turn it OFF.

 It will display RED light for 1 second if it is OFF.

Pairing your BLE TEMP Tag device with iPhone

 There is no need to pair the BLE TEMP Tag to the iPhone. Just turn ON the BLE

TEMP App in the iPhone and it will immediately connect with any available BLE

TEMP Tag device within range.

 The BLE TEMP App can connect up to 6 devices at the same time. You can place

your BLE TEMP Tag in separate locations as long as it is within range (around 50

meters in open field). The data from these devices will be simultaneously display in

the App.

Using the BLE TEMP App

 Tap the BLE TEMP app icon in your iPhone. The Main screen of the app will display

and should look like below:

PAGE 1
National Electronics & Watch Co,. Ltd. BLE TEMP iPhone App User Manual (Preliminary-Subject to change without prior notice) Ref: BLE TEMP 4.4 Pairing your BLE TEMP Tag device with iPhone About BLE Bluetooth low energy (BLE) is a feature of Bluetooth 4.0 wireless radio technology, aimed at new, principally low-power and low-latency, applications for wireless devices within a short range (up to approx. 10 meters / 32 feet).
PAGE 2
National Electronics & Watch Co,. Ltd.  The data is presented in tabulated form with 5 columns. Following are the brief description of the columns: o Pod  This is the serial number of your BLE TEMP Tag device. You cannot change this number. 0 0 0 o Temp F or Temp C. You can change the UNIT by tapping on the Degree C or 0 F on the lower side of the screen. o High  This is the highest temperature that the BLE TEMP Tag device has measured. It will be reset if you turn OFF the BLE TEMP Tag device.
PAGE 3
National Electronics & Watch Co,. Ltd. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.