User's Manual

ManualsBrandsNational Electronics & Watch ManualsElectronicsHEART RATE WATCH

National Electronics & Watch Co,. Ltd.

M08-729D User Manual

This is an HRM watch Men’s version. Features includes

HRM with recovery function, Chrono, Dual time T1/T2, two

alarms. three lines LCD and calendar programmed from

2008 to 2057. The watch is using the latest 2.4Ghz digital

data transmission technology to communicate with the

HRM belt.

General Operations

All Modes:

Press S3 to toggle to different modes, Time mode, HRM

mode, HRM Data mode, Chrono mode, Alarm mode and

ID LINK mode. Press S4 to switch ON the EL back light.

Time Mode:

User can also select T1 or T2 as primary display. Press

and hold S2 for 2 seconds to toggle from T1 to T2.

User can toggle Chime ON/ OFF by pressing S1

TIME Setting mode:

Press and hold S4 for 1 seconds until the watch will

display “SET HOLD”. 2 seconds later, the hour digit will

blink. Press S1 to increase setting, press and hold S1 for

fast forward setting. Press S2 for backward setting, press

and hold S2 for fast backward setting. Press S4 to exit

time setting mode. Press S3 to set the next digit. If there is

no key operation after 2-3 minutes, the watch will auto exit

time setting mode.

In time setting mode the sequence is Hour—Minute—

Second—Year—Month—Day—Weekday—12H/24H—

LCD Contrast. Display contrast range is from –4 to +4.

Default is 0.

HRM Mode:

It is recommended that the user set up first his/her

personal details before doing the exercises. Please refer

to HRM setting mode on how to set up the personal details.

Press S3 shortly from Time mode to HRM mode. The

watch will automatically search for HRM signal. If the

watch has not been linked before with HRM belt, it will

proceed to ID Link mode. See Link mode for details. If the

watch has been linked before and link is successful, it will

proceed to display the current heart rate in target range /

current HRM.

User can select different views according to his/her

preference. The views available are Heart rate in target

zone/ current HRM, Calorie/ Current HRM, Exercise

Time/Current HR/ % Max, and Calorie/% max. User can

toggle through these views by pressing S2.

Summary of content (5 pages)

PAGE 1
National Electronics & Watch Co,. Ltd. M08-729D User Manual User can toggle Chime ON/ OFF by pressing S1 This is an HRM watch Men’s version. Features includes HRM with recovery function, Chrono, Dual time T1/T2, two alarms. three lines LCD and calendar programmed from 2008 to 2057. The watch is using the latest 2.4Ghz digital data transmission technology to communicate with the HRM belt. TIME Setting mode: Press and hold S4 for 1 seconds until the watch will display “SET HOLD”.
PAGE 2
National Electronics & Watch Co,. Ltd. From any view selected, press S1 to start/ stop exercises. Press and hold S4 to reset the current Run. Once the user starts running exercises, the watch will auto display the Heart Rate, exercise Time, %max HR calories. If Chrono is not started, the Calorie will not calculate. Press and hold S2 to save current Run. A total of 50 Runs can be saved in HRM data mode. User set the recovery Timer to 10 minutes.
PAGE 3
National Electronics & Watch Co,. Ltd. HRM DATA MODE: Alarm Setting mode: Press S3 from HRM mode to HRM DATA mode. The watch will display ‘DATA”. If there is no data available, it will display “- - -“. Press and hold S4 for 1 seconds to enter Alarm setting mode. The watch will show “SET HOLD” and 2 seconds later, the hour digit will start to blink. Press S1 to increase setting, press and hold S1 for fast forward setting. Press S2 for backward setting, press and hold S2 for fast backward setting.
PAGE 4
National Electronics & Watch Co,. Ltd. Water Resistance: This watch is water resistant up to 5 ATM. Battery Replacement: If the Display dims or the EL light is dim, the user is recommended to go to authorized service center for correct battery replacement (CR2032). FCC NOTE: This device complies with Part 15 of the FCC Rules.
PAGE 5
National Electronics & Watch Co,. Ltd.