SOHOware™ Fast base's-TX Fast Ethernet Hub SFH105A/SFH108A Installation Guide PIN 183-300105-00 Revision: Al February 1998 NDC Communications, Inc. 263 Santa Ana Court, Sunnyvale CA 94086. US Tel: +1 (408) 730-0888 Fax: +1 (4083) 730-0889 Technical Support E-mail: NDC World Wide Web www. clubland.
TRADEMARKS NDC is a trademark of NDC Communications, luc. All other names mentioned in this document are trademarks registered trademarks of their respective owners. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits ure designed to provide reasonable protection against harmful interference when the equipment is operated iu a residential installation.
Table of Contents INTRODUCTION Features... Hardware De HARDWARE INSTALLATION i Quick installation Procedure Up linking Multiple Subs oor, é PRODUCT SPECIFICATIONS .
Introduction , Features o VLASIC technology application eliminates the need for cooling fans, ensuring silent operation and increasing reliability by eliminating a potential point vi failure » Ten tines the speed and performance of tradition Ethernet networks. «Up link switch provides easy interconnecting hui expansion: no sim-piugging problems. * Auto-partition isolates problem connectives front tie rest of the artwork. + Complies with IEEE 802.3u.
Mee my 8 Hardware Installation . Quick Installation Procedure 1 Place hub on a smooth au surface 2. Comet DC power adapter to jack on rear panel and plug wn. 3 Connect workstations to hub using Category § Twisted-Pair cabling, Notes Tia RI-45 connector io port whitish disconnected “other end port on Fast Aestheticism in “Forestation: Distance: between the Hub aid the Workstation: Sar bei monomers than £06: meters.
1. Disconnect power supply. 2 Connect a Category 5 Twisted-Pair cable to the Up link port {Port # 1) ot the thirst hub. Set the Up link Switch 10 Up link mode. 3 Connect the either end of the Category $ Twisted-Pair cable to any empty port of the second hub. Set ihe Up link Switch to Normal (node) mode. 4. Cowed workstations to the hub using Category 5 Twisted-Pair cabling, Connect each device our network using the same process as in Step 3. 6.
EC DECLARATION OF CONFORMITY . For the following equipment: Tee conduct Name: Louse TX Fast Ethernet Hus Model Number SFH103A/SFHI0SA Produced by! Manufacturers Nome NATIONAL DATA COMM CORPORATION \manufacturer's Address 26, NO. 28, INDUSTRY EAST 9 ROAD SCIENCE PARK, L SIN-CHU TAIWAN, ROC.