User Manual

InstantWave 11Mbps Wireless Ethernet Client 7
Using the WEC COMFig Tool
The WEC COMFig Tool is a Windows based utility used to configure the WEC
via a COM port connection between the WEC and a PC.
It provides the following functions:
• Sets WEC parameters (e.g., Network Mode, Domain Name (SSID), Security,
etc.)
• Diagnoses the WEC hardware and shows the diagnostic results
• Upgrades the WEC firmware
• Resets the WEC Configuration
To start the WEC COMFIG Tool, click Start/Programs/Wec/WEC COMFig Tool.
Connect
The program opens with the WEC COMFig Tool/Connect card (Figure 5). Once a
valid COM port is selected, the WEC COMFig tool will remember this port
number and use it as the default port when the program is next run. The program
will show Connected when a connection is made.
Figure 5. Connect