Awesome for Kids ARTIFICIAL GRASS GENERAL PROJECT INSTALLATION TIPS Buy or Rent HAND TOOLS & POWER EQUIPMENT Pets love it! Find Quality TUNDRA BRAND Artificial Grass Installation Supplies SHOP ONLINE or AT YOUR LOCAL HOME DEPOT STORE ONLINE at HomeDepot.
ARTIFICIAL GRASS INSTALLATION TIPS STEP 1: Prepare the turf & project area surfaces • Measure the area you want to cover - take a measure of both width and depth - SURFACE MATERIALS ARE 15 FEET wide, Order materials: Some pre-cut products may be a different size MOST are 15 feet wide BY any length.
ARTIFICIAL GRASS INSTALLATION TIPS Step 2‐Installation of Turf • SWEEP and clean the area BEFORE YOU unroll the grass & expose the grass face. Let the grass "relax" on a flat, open area. Once you relax the turf trim the EXTRA black edge off of each edge of the turf (with a razor knife or carpet cutter) so that the edges are very straight. Don't cut rows of blades unless the edges seem uneven. You may need to cut it the turf into smaller sections measure, each side - mark and cut.
ARTIFICIAL GRASS INSTALLATION TIPS Seaming: Step 1: Set the Grain & Position Setting GRAIN - Make sure to point each section of grass in the same direction, (our diagram shows the 2 pieces set in the wrong way) Lay each section of grass down, side by side, in the way in which you want them seamed together.
ARTIFICIAL GRASS INSTALLATION TIPS Seaming Step 2: Add Seam Fabric & Align Seam Flip the edges of your turf over, by about 12 inches and weight down to keep "open". Set an 8 inch wide piece of seam fabric from one edge of the seam to the other (you can secure the fabric down with a few nails (or spikes), to keep it from sliding. Then move each piece of grass into place, and align the edges as far apart as the GAUGE (space) of the rest of the rows, for a perfect seam.
ARTIFICIAL GRASS INSTALLATION TIPS Option 1: Using Seam Glue Seaming Step 3 (Option 1): Secure Seam Open the two sides of grass, at the seam and fold edges back, about 12 inches, hold edges down with weight. Lay out your seam fabric - shiny side down.
ARTIFICIAL GRASS INSTALLATION TIPS Option 2: Using 6 inch Seam Spikes: Seaming Step 3 (option 2): Secure Seam Use 8 inch Seam Fabric & set a 6 inch seam spike, every 4 inches, approximately ½ inch from the edge; in a diagonal pattern, on either side of the seam. One spike on each side of both ends of the seam to secure in for general use.
ARTIFICIAL GRASS INSTALLATION TIPS Step 3‐Secure the Outside Edge & Infill BEFORE you infill - SECURE THE OUTSIDE EDGE by using 6 inch seam spikes, every 6 inches, around the edge. Place the spike approximately ½ inch from the outer edge. In addition to nailing the turf, you will need to place “infill” granules on top of the turf. The infill material helps to protect the blades and backing from UV exposure and weathering and assists the blades to stand, upright, while weighing the surfaces down.
ARTIFICIAL GRASS INSTALLATION TIPS KEEPING YOUR GRASS LOOKING NEW While this is a low maintenance product, there still is some maintenance required. Following these simple suggested routines will insure that you will protect and enjoy your new artificial grass for years to come. 1. Once every month you should blow off your turf with a leaf blower to get the leaves and dust off the turf fibers. This will take only a few minutes but will keep your turf looking beautiful. 2.
ARTIFICIAL GRASS INSTALLATION TIPS Need Help? Design, Estimating & Installation Customer Support HELP LINE Call Us Toll Free 877-99-TUNDRA Mon to Fri 9am - 7pm Sat 9am - 1pm Pacific Standard Time Find Quality TUNDRA BRAND Artificial Grass Installation Supplies ONLINE at HomeDepot.