Leak Alert Sensor Sensor de alerta de filtración Capteur d’alerte de fuite Sensore di avviso perdita Leckwarnsensor EN Quick Start Guide ES Guía de inicio rápido IT Guida rapida DE Schnellstartanleitung FR Guide de démarrage rapide EN 1
OVERVIEW Status light Cable length 1.
BATTERY INSTALLATION 1 Unscrew the sensor cover with the supplied screwdriver and lift it off. 2 Insert the supplied two AAA batteries into the battery compartment according to the polarity markings (+ and -) shown. Pairing mode will automatically activate on the sensor for 3 minutes when batteries are inserted. The sensor status light will blink blue slowly during pairing mode.
DOWNLOAD THE SWANN SECURITY APP EN 4 1 Download the latest version of the Swann Security app from the Apple App Store® or Google Play™ Store on your iOS or Android device. Simply search for "Swann Security". 2 Open the app and create your Swann Security account by tapping “Not yet registered? Sign Up” at the bottom of the screen. Then, activate your Swann Security account by confirming the verification email that is sent to the registered email address.
SET UP THE SENSOR Open the Swann Security app and tap the Pair Device button on the screen. If you have already paired a device, tap the menu icon in the top left and select “Pair Device”. The app will now guide you through the pairing process and set up the sensor. Before you begin, have the sensor with you and be close to your router. Please note that the sensor can connect to a 2.4GHz Wi-Fi network only.
MOUNTING THE SENSOR EN 6 • Place the sensor using the included double-sided tape in areas around your home where there is the potential for water leaks, for example, under the kitchen sink, near the washing machine, next to the toilet, water heater, etc. Also included is a pack of cable clips to keep the cable tidy and out of the way. • Make sure the sensor location has strong, reliable Wi-Fi reception available so you can get timely alerts.
HELP AND RESOURCES Mounting Examples Laundry room Toilet Status Light Guide The status light on the sensor tells you what is happening with the device connection. When the sensor is functioning normally, the status light will be off (unless it is out of battery/unpaired). Slow Blinking Blue Pairing mode Solid Blue (5 seconds) Leak Detected. Connecting to Wi-Fi.
FCC STATEMENT This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.