Instructions / Assembly

25 Forge Pkwy Franklin, MA 02038
1-800-343-7875 Fax [phone]
www.berryglobal.com
10/4/17
Backing:
Printed 2 mil Foil
Adhesive: Butyl Rubber Adhesive
Liner: Blue LDPE Film
! !
! !
!
!
!
! !
! Forms tight seals around complex shapes
! !
! !
Standard Shelf Life (at 25C): 36 months from date of manufacture.
UL 723
Flame Spread
<25
UL 723
The information presented herein was prepared at BERRY GLOBAL, INC. (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry's knowledge it is true and accurate. However,
the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the
intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's information and consideration, and do not
constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY assumes any legal responsibility.
Operating Temperature
VOC Content
Recommended Storage Conditions: 60-80 °F at 40-60% RH
Tensile Strength
ASTM D-1000
40 to 200 °F
4 to 93 °C
* Results verified by the SMACNA Research & Testing Institute.
<1 g/L
Smoke Developed
<50
ASTM D-1000
Total Thickness
PSTC-101
90
oz/in
PSTC-101
Adhesion to Backing
Adhesion to Steel
ASTM D-1000
Foil Thickness
17.0
mils
0.432
mm
2.0
mils
Standard UOM
Typical Test Values
Metric UOM
Test Method
Provides permanent water and air-tight seal
UL 181B-FX Listed
toward requirements for EA Credit 1 (Optimize
Low VOC Content
(Low Emitting Materials) under LEED®
Aggressive butyl mastic adhesive
Energy Performance) under LEED®
Can contribute toward satisfying EQ Credit 4.1
Performs to SMACNA 0.5", 1", 2", 3", 4", 6" up to 10"
Resistant to moisture and solvents
w.g. pressure classes and seal classes A, B, and C*
Easy to use in tight spaces
Features
Benefits
367-17
FoilMastic™ UL 181B-FX Foil Tape
Standard Sizes:
Specifications:
Listed flexible, non-metallic ducts
Aluminum
Colors:
48mm x 31M, 72mm x 31M
high pressure sheet metal duct systems and UL
Applications
Indoor/Outdoor sealing of low, medium, and
Seal cracks and seams in gutters, sheet metal
roofing, trailers, and more
UL 181B-FX Listed; Pressure testing validated
by SMACNA Testing & Research Institute
Repositionable for several minutes for easy install
0.051
mm
23
lb/in
40.28
N/cm
9.85
N/cm
40
oz/in
4.38
N/cm
Conformable foil backing
Meets code requirements and can contribute
Adhesive
Liner
Backing