sarcoma Instruction Manual 1. Introduction Hear-Bud is a wireless auditory assistance device designed for persons who are handicapped in listening and expect to enjoy audio signal with the freedom of wireless. Hear-Bud can be used for auricular training in an education institution, for auditory assistance at places of public gatherings, such as a church, theater, auditorium. 2. User Manual 2.1 Transmitter A 3.
F — Reset Button To reset the receiving frequency to the lowest frequency band G — Scan button To scan the closest available frequency channel H — On/off switch To power on/off the receiver I Power indication LED ‘Turn on/off when power is on/off respectively J — Volume level control To adjust the audio volume output of the receiver NOTE: This device complies with Part 15 of the FCC Rules.
2.3 Figure 1 shows the connectivity diagram of Hear-Bud transmitter for connection of the TV set and power. Select one of the 4 radio channels by switching the channel selection switch. 2.4 Switch on the power at the receiver using On/off switch. 2.5 Press the reset button once to reset the receiver 2.6 Press the scan button to scan the active radio channel 2.7 If the scanned channel is not the ene you expected, press scan again OR press reset and than scan again.