User's Manual

ManualsBrandsNapco Security Technologies ManualsCamera & PhotoCONSUMER CAMERA

8 NAPCO iBridgeVideo ISV2-DOME-WIFI Installation Guide

NAPCO SECURITY TECHNOLOGIES, INC. (NAPCO) warrants its

products to be free from manufacturing defects in materials and

workmanship for twelve months following the date of manufacture.

NAPCO will, within said period, at its option, repair or replace any

product failing to operate correctly without charge to the original

purchaser or user.

This warranty shall not apply to any equipment, or any part thereof,

which has been repaired by others, improperly installed, improperly

used, abused, altered, damaged, subjected to acts of God, or on

which any serial numbers have been altered, defaced or removed.

Seller will not be responsible for any dismantling or reinstallation

charges.

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH

EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.

THERE IS NO EXPRESS OR IMPLIED WARRANTY OF

MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE. ADDITIONALLY, THIS WARRANTY IS IN

LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE

PART OF NAPCO.

Any action for breach of warranty, including but not limited to any

implied warranty of merchantability, must be brought within the six

months following the end of the warranty period. IN NO CASE

SHALL NAPCO BE LIABLE TO ANYONE FOR ANY

CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF

THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,

EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S

OWN NEGLIGENCE OR FAULT.

In case of defect, contact the security professional who installed and

maintains your security system. In order to exercise the warranty, the

product must be returned by the security professional, shipping costs

prepaid and insured to NAPCO. After repair or replacement, NAPCO

assumes the cost of returning products under warranty. NAPCO shall

have no obligation under this warranty, or otherwise, if the product

has been repaired by others, improperly installed, improperly used,

abused, altered, damaged, subjected to accident, nuisance, flood,

fire or acts of God, or on which any serial numbers have been

altered, defaced or removed. NAPCO will not be responsible for any

dismantling, reassembly or reinstallation charges.

This warranty contains the entire warranty. It is the sole warranty and

any prior agreements or representations, whether oral or written, are

either merged herein or are expressly cancelled. NAPCO neither

assumes, nor authorizes any other person purporting to act on its

behalf to modify, to change, or to assume for it, any other warranty or

liability concerning its products.

In no event shall NAPCO be liable for an amount in excess of

NAPCO's original selling price of the product, for any loss or damage,

whether direct, indirect, incidental, consequential, or otherwise

arising out of any failure of the product. Seller's warranty, as

hereinabove set forth, shall not be enlarged, diminished or affected

by and no obligation or liability shall arise or grow out of Seller's

rendering of technical advice or service in connection with Buyer's

order of the goods furnished hereunder.

NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE

COMPLETELY TESTED WEEKLY.

Warning: Despite frequent testing, and due to, but not limited to, any

or all of the following; criminal tampering, electrical or

communications disruption, it is possible for the system to fail to

perform as expected. NAPCO does not represent that the product/

system may not be compromised or circumvented; or that the product

or system will prevent any personal injury or property loss by

burglary, robbery, fire or otherwise; nor that the product or system will

in all cases provide adequate warning or protection. A properly

installed and maintained alarm may only reduce risk of burglary,

robbery, fire or otherwise but it is not insurance or a guarantee that

these events will not occur. CONSEQUENTLY, SELLER SHALL

HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY

DAMAGE, OR OTHER LOSS BASED ON A CLAIM THE PRODUCT

FAILED TO GIVE WARNING. Therefore, the installer should in turn

advise the consumer to take any and all precautions for his or her

safety including, but not limited to, fleeing the premises and calling

police or fire department, in order to mitigate the possibilities of harm

and/or damage.

NAPCO is not an insurer of either the property or safety of the user's

family or employees, and limits its liability for any loss or damage

including incidental or consequential damages to NAPCO's original

selling price of the product regardless of the cause of such loss or

damage.

Some states do not allow limitations on how long an implied warranty

lasts or do not allow the exclusion or limitation of incidental or

consequential damages, or differentiate in their treatment of

limitations of liability for ordinary or gross negligence, so the above

limitations or exclusions may not apply to you. This Warranty gives

ou specific legal rights and you may also have other rights which

vary from state to state.

NAPCO LIMITED WARRANTY

FCC Statement

1. This device complies with Part 15 Of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause un-

desired operation.

2. The user's manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes, or modifi-

cations not expressly approved the party responsible for compliance could void the users authority to the equipment. In cases

where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information

required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to

have the capability to access information in that form.

3. (b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement,

placed in a prominent location in the text of the manual: NOTE: This has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician help.

4. RF exposure warning

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this trans-

mitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operat-

ing in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation in-

structions and transmitter operating conditions for satisfying RF exposure compliance.

NAPCO iBridgeVideo ISV2-DOME-WIFI Installation Guide 1

Camera Mounting

The mounting surface must support a minimum of 3lbs.

1. Match the Template to the Mounting Plate holes to lo-

cate the correct mount-

ing holes for prop

amera posi

tion.

Affix

the Template to

ceiling or wall. For wall

mounting, position the

UP arrow at the top.

Mark the 3 mounting

hole

Usi

ng a drill bit slightly

smalle

r than the diameter of the Expansion Bolts, drill

hole

s into the mounting surface. Fully insert the 3 Ex-

pan

sion Bolts.

Secure the Mounting Plate usin

g the 3 Mounting

Scre

ws inserted into the three Expansion

Bolts.

Route the Power and Ethe

rnet

Cabl

e: Connect the Wate

rproof

Con

nector to the Ethernet plug.

Snake both cables through

the

cente

r of the Mounting Plate (drill a 3/4" hole) or ru

n the

cabl

e through the notch in the Mountin

g Plate and

along the mo

unting surfac

Align the notch in the Camera base with

the front of the

Mounting Plat

e. Push the Camera base into the Mount-

ing Plate and slide away from the tab until it snaps se-

curely in place.

Adjust the Tilt, Pan angle and

lens Rotation.

Description

The NAPCO ISV2-DOME-WIFI is an HD 1080P indoor / out-

door, network wired / wireless dome video camera that allows

the viewing of live and recorded video clips through the

iBridgeVideo App (Android or iOS). The ISV2-DOME-WIFI

also allows for motion-triggered video clip push notifications.

The camera is equipped with Active Deterrence, namely an

integral spotlight and 110dB siren. The selective Smart De-

tection option helps to reduce false alerts. In addition, the

Two-way Talk feature includes integral speaker and micro-

phone with echo cancellation technology to allow the home-

owner to clearly interact with pets and family, or dissuade

unwelcome guests.

To activate the camera, an active NAPCO ComNet Dealer

account at www.NapcoComNet.com is required.

 Wi-Fi Support (IEEE802.11b/g/n)

 Dual Internal

Antenna 2x2

MIMO

 Wire

d Ethernet Connections Supported

 Maximum 30fps@ 2.0MP (1920 x 108

 True Day/Nig

ht Vision

 2.8mm Fixed Len

 Smart IR 30m (98ft.)

 Outdoo

r Rate

d IP67

 Ac

tive Deterrence: Integral Spotlight and 110dB Sire

 Smart Motion Detec

ion

 Two

-way talk: Integral speaker and micropho

Included

Components

 ISV2-DOME-WIFI Camera

 Mounting Plate and Templa

 12V Power Adapter

 Wate

rproof Conne

ctor

 Mounting S

crews and Expansi

on Bolts

 Installation G

uide (these instructions

)

Compa

tible Accessories

ISV2-WIFI-BOX ................... Round Back Box for ISV2-DOME-WIFI

ISV2-DOME-BKT ................ Wall Mounting Bracket for ISV2-DOME-WIFI

Quick Install Summary:

Activate camera at www.NapcoComNet.com

b. Install the iBridgeVideo app on the mobile device.

ower camera.

Connect the mobile device to a 2.4MHz Wi-Fi netwo

rk.

Launch the iBridgeVideo app and lo

g in.

Add camera to the app via the wireless method (Wi-Fi

connection) or wired (hardwired) options in the app.

Mount camera at desired location

NAPCO iBridgeVideo ISV2-DOME-WIFI

HD Indoor / Outdoor Wired / Wireless Dome Camera

with Active Deterrence

Installation Guide

WI2461ALF 11/21

333 Bayview Avenue, Amityville, New York 11701

For Sales and Repairs, (800) 645-9445

For Technical Service, (800) 645-9440 or visit us at

http://tech.napcosecurity.com/

(Note: Technical Service is for security professionals only)

Publicly traded on NASDAQ Symbol: NSSC

Wall Mounting

Waterproof Connector

Mounting Surface

Template

Expansion Bolt

Mounting Plate

Mounting Screw

Camera

Ceiling Mounting

Summary of content (4 pages)

PAGE 1
N A P C O L I M I T E D WA R R A N T Y NAPCO SECURITY TECHNOLOGIES, INC. (NAPCO) warrants its products to be free from manufacturing defects in materials and workmanship for twelve months following the date of manufacture. NAPCO will, within said period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user.
PAGE 2
Camera Wi-Fi Enrollment Using the App First activate the camera(s) at www.NapcoComNet.com, then perform the steps below. The camera must be powered and its green LED must be flashing continuously. Proceed as follows: 4. Scan the QR code located on the base of the camera, then tap OK. If you have trouble scanning the code, tap Manually enter SN and type the serial number. LED Status Indications Audio Compression ........ G.711 Audio Input ..................... Omnidirectional Mic Audio Output ............
PAGE 3
Device Info Screen Features 6. The camera's green LED will be flashing, indicating it is not connected to a network. The Device Info screen includes the following additional features: With Android devices, the screen below will appear. Tap Connect to continue.  If using a hardwired connection without Wi-Fi, tap No, I want wired connection (skip steps 7-10).  If using a Wi-Fi connection, in the screen below (left) tap Yes, go to Wi-Fi settings, then tap Next.
PAGE 4
9. Type the SSID password of the Wi-Fi network (tap the "eye" icon to the right of the Password field to display the characters). The app will remember this password if Save password is checked. When finished, tap Connect (the camera's LED will start to flash). The password must be typed correctly or the camera will not connect to the wireless network. To select another network, tap Select other network. screen (below).