User's Manual Part 3

ManualsBrandsNanjing IOT Sensor Technology ManualsElectronicsSmart PIR Motion Detector

Network Setting

1. Add to network

Quick click [Multi-functional Key] 4 times and [System Indicator]would flash in green to request

to add to the ZigBee network. Then [System Indicator] goes out after staying green for 2s when it

is added to the ZigBee network.

Front of body Back of body

Quick click [Multi-functional

Key] 4 times

Flash in searching for the network

Go out after staying on for 2s

when added to the network

1 2

Summary of content (8 pages)

PAGE 1
Network Setting 1. Add to network Quick click [Multi-functional Key] 4 times and [System Indicator]would flash in green to request to add to the ZigBee network. Then [System Indicator] goes out after staying green for 2s when it is added to the ZigBee network.
PAGE 2
.Exit the network. Long press [Multi-functional Key ]for 10s and [System Indicator] goes out after flashing 4 times to exit the ZigBee network successfully and restore to factory settings at the same time.
PAGE 3
Note: ●First make sure ZigBee network of the wireless gateway (additional purchase) is working well. Meanwhile, make sure this product is connected to power and is placed within the effective communication distance of the gateway. If remote control is needed, connect the gateway to WAN. ●When need adding this product to other gateways, please exit the current gateway ZigBee network then add it to the new gateway following above instruction. ●Factory settings defaults to out of ZigBee network.
PAGE 4
How to use Under normal conditions [System Indicator] would not flash. In the state of “armed”, once motion is detected in detection area, [System Indicator] would flash red for once. And at the same time, the mobile smart terminal would receive alarm notification.
PAGE 5
Cautions ●This product shall be installed according to the height specified in the user manual. Installing too high or too low would cause adverse effect to the angle and distance of detection. The shield, furniture, potted plant and other partitions shall not be placed in the detective range of this product. ●This product shall be placed away from air conditioners, refrigerators, stoves and other places as it is sensitive to change in temperature.
PAGE 6
Specifications Communication Protocol IEEE 802.15.4 ZigBee/SmartRoom Detection Range Circumference with 6m of Diameter ( Installation Height 3m) Detection Sensitivity Once event Detection Speed 0.2～3.5m/s Standby Consumption/Standby Current 30μA Mounting Height（m） 2.
PAGE 7
Net Weight（g） 50 Material& Color PC，White Flame Retardant Rating UL94 V-2 Operating Temperature -10℃～+45℃ Operating Humidity ≤95%RH (Noncondensing) 14
PAGE 8
Statement: Hereby, Nanjing IOT Sensor Technology Co., Ltd declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.