Smart PIR Motion Detector WL-ZSPWBPW-PI11-01 User User User Manual ©Nanjing IOT Sensor Technology Co., Ltd.
Federal Communications Commission (FCC) Compliance Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Federal Communications Commission (FCC) Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation.
Function Illustration Multi-functional Key System Indicator Magnet Detection Area Front of body 3 Battery Compartment Back of body Base
Features ●Realize remote monitoring and management via APP Client. ●In the state of “Armed” , when motion is detected in detection area, the mobile smart terminal would receive alarm notifications immediately. This product could also interwork with security devices to secure your home in all aspect. ●Wireless alarm notification, quick response, robust to interference, low false alarm rate. ●Self-adjustment to sensitivity in case of environment temperature change.
Installation Steps Note: it is recommended to install this product 2.4m to 5m above ground. Option A:Place it on any fixed flat surface Option B:Wall/Ceiling-mounted Step One: Mount two expansion plugs on the desired location of the wall/ceilings. Then fix the base with the self-tapping screws.
Step Two: Open the cell cover and put in a CR2 battery.