Peculiar Gateway WL-ZGWMDPB-G110-02 Quick Guide Please read the manual carefully and keep it properly before using the product.
Federal Communications Commission (FCC) Compliance Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against armful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Federal Communications Commission (FCC) Compliance Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Preface The copyright of this manual belongs to Nanjing 10T Sensor Technology Co., Lid., pirated reserved. Julian is the registered trademark of Nanjing 10T Sensor Technology Co., Lid. The reproductions of the content of the manual, in whole or in part, are strictly prohibited without the written consent from Nanjing 10T Sensor Technology Co., Ltd. The using of the trademark above is also forbidden. Nanjing OT Sensor Technology Co., Ltd.
Product Features e Support new technology Smart Room ® Saving and running settings by special software e Simple structure, easy to use e® New appearance design, depend on intelligent access, more secure
Functions 3G Network Indicator Light SYS Key Zambezi Network Indicator Light Zambezi Network Setting Indicator Light WiFi Indicator Light Ethernet Indicator Light System Indicator Light Power Indicator Light SET Key © LEIS AIRTIGHT Side
Installation illustration It can be placed on platform for use. When using 3G card, please push the bottom cover plate away in the direction of the arrow, insert the 3G cards when use.
Internet settings Connect WiFi Open the equipment with WiFi function (For example: smart phone, pad, notebook computer, etc), and search WiFi network of this product. Choose WiFi signal of the name for "Julian_ {X for last six numbers of this products 1D) to connect. (initial password: 12345678). Notes: For security, please modify the initial password in time.
Network setting Open a browser by wife, the website is 192.168.188.1. Then user can enter the gateway management background. After login, user can have Ethernet setting, WiFi setting, and 3G setting.
Network setting 3G Network Light —) {3G network set up correctly, 3G Indicator Light flashes slowly at ordinary state, flashes rapidly in the data flow} s SHEER Ethernet Indicator Light ® {Ethernet set up correctly, Ethernet Indicator Light fishes rapidly in the data flow) WiFi Indicator Light {WiFi set up correctly, WIF! Indicator Light flashes rapidly in the data flow} »
Zambezi Network Connection Setup 1. Power on, | Power indicator light ] is constant on, it means that power is working normally; Network cable connection is right and Ethernet configuration is right too, after the gateway work (about 50 seconds), [ System Indicator light } turn on one time every 2 seconds. If the [ System Indicator light ] turn on every second. It means gateway can not connect to the internet.
Network Connection Setup 2. It can build network after the gateway start working completely, quickly click the [ SET Key] six times, and then the [ Zambezi Network Indicator shine quickly. After the [ Zambezi Network Indicator] turn on once every second, it means the Zambezi network can work normally.
Network Connection Setup 3. Quickly click SET Key four times, Zambezi Network Indicator Light is constant on, it means other devices are allowed to join the network; Quickly click SET Key 3 times, Zambezi Network Indicator Light goes off, it means new devices are not allowed to join the network. Zambezi Network * Setting Indicator Light . § SET Key The default time is 4 minutes. The Zambezi Network Indicator Light will go out when the time arrives.
Network Connection Setup 4. Press SYS Key 10 seconds, network restores to factory setting. Zambezi network will not be influenced.
Software Download Method Two: 1. iPhone and iPad users can log into “APP Store” and search “eolian” or select * for downloading; 2. Android users can search “eolian” in ‘Google Play *, a "for downloading; select Method Three: Users can also directly download from our official website: HTML Notes: if it is first time to use it, please read the software user manual carefully and download the newest version.
Product Standard Name Gateway Model Communication Mode IEEE802.15.