Federal Communications Commission (FCC) Compliance Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Wall Switch User Manual Thank you for choosing the products of Julian. Manual is devoted to guiding you the installation steps and features of Julian products This manual is protected under international copyright laws.
Wall Switch User Manual | .Production Introduction Wall Switch is based on Zambezi protocol, allows users to control indoor switches remotely by any smart mobile terminals, very simple operation. This product is also widely applied in smart building, smart hospital, smart hotel, and smart breeding etc besides for the smart home system Il .
Wall Switch User Manual IV. Installation steps 1.Connect this product with the wire of the wall box. Fix Live Line into Line, Null Line into Neutral, Earth Line into Traveler Load Input into Load Null Line — Live Line Load Input Earth Line Note: Please make sure that the power has been turned off before installation! Dangerous, non-professionals are prohibited operating without authorization.
Wall Switch User Manual 2.Embed the screws in the wall box into mounting holes and tighten.Make sure the indication light upward direction.
Wall Switch User Manual V. Application methods 1 Networking Setup (1) Please make sure the gateway (need to additional purchase} Zambezi network is working with power within the valid communication distance of gateway before configuring the wall switch.
Wall Switch User Manual { 2) Quickly click Open Key 4 times to join Zambezi network. LED Indicator Light stays flickering when searching network.
Wall Switch User Manual 2 Software download { 1) Choose the related software according to different smart mobile terminal.
Wall Switch User Manual Installation If you are new 1o using it, please read this product instruction carefully before installation. Cleaning This product should be installed in a clean and dry place to avoid humidity or other material entering internal components which will influence its work. When the surface is stained with dust, dry it with soft cloth, cleaning fluid with corrosive composition and other chemical solvent are forbidden.
Wall Switch User Manual IX.