Specifications

Blue Tooth
These three Models connects to a wide range of Bluetooth Headset, compatible with Bluetooth
specification V4.0 and backwards compatible with 1.1, 1.2, 2.0 and 3.0.
How to enable headset mode?
1) Find Menu then navigate as follows：Menu->Settings->Basic Setting->Headset:
2) Enable the Headset priority
3) Choose the “User HeadSet” or “Both” from “ringer Device for headset” option
4) Press the save button to save the configuration。
5) Press the headset key on phone’s during the idle status when you accomplish the above-
mentioned configuration. Headset icon will display on phone status bar
How to activate Bluetooth via phone interface？
1) Find Menu then navigate as follows:
Menu Settings Basic Setting Bluetooth
2) Press the save button to save the configuration.
3) You will see the Bluetooth icon on phone’s homepage status bar during the idle status.
(Now the icon should have a fork sign, which means the phone is not connected to the Bluetooth
headset.Please refer to the following manual to connect the Bluetooth headset.)
How to activate Bluetooth feature via web interface?
1) Login the phone’s webpage Setting Feature Bluetooth
How to open the Bluetooth pairing mode on Bluetooth headset?
1) Turn on the Bluetooth headset.
2) Long press the multifunction key on the Bluetooth headset until the indicator LED alternately
flashes red and blue.
The Bluetooth headset is in pairing mode.
How to scan the Bluetooth headset device on phone interface？
1) Press the Scan button on phone interface.
2) The phone will enter the scan interface.
The phone starts searching for Bluetooth headsets within the working range of 32 feet.
3) There will display all detected Bluetooth headsets on the phone.
4) Choose the desired Bluetooth Device from the list and connect to it.
5) you will see the "Connect Success!" prompt and the Bluetooth icon without fork sign appear
on the status bar.
Note: If the Bluetooth headset has a PIN, you need to configure the PIN via web
interface: Default PIN is 0000.
1) Login the phone’s webpage->Setting->Feature->Bluetooth
How to edit device information on phone interface?
1) Find Menu then navigate as follows:
MenuSettingsBasic SettingBluetooth: Edit Device Information
2) Press the enter button, you can edit the Device Name.
How to adjust the earphone volume during a call?
With the Bluetooth headset paired, you can do the following:
Press the Volume key (+) on the Bluetooth headset to increase the volume.
Press the Volume key (-) on the Bluetooth headset to decrease the volume.
How to Ending Calls?
With the Bluetooth headset paired, press the multifunction key on the Bluetooth headset
to end a call.
Troubleshooting
Why can’t the phone detect the Bluetooth headset?
1) Ensure the Bluetooth headset is turned on.
2) Ensure the Bluetooth headset is in pairing mode, when the phone is searching for Bluetooth
headsets.
Why there is a noise?
1) Check the battery level. If the battery level is low, charge the Bluetooth headset.
2) Ensure the Bluetooth headset and the phone are within the working range of 10 meters
(32 feet) and there is no obvious interference (walls, doors, etc.) between them.
WIFI
How to enable WiFi feature via phone interface:
1) Find Menu then navigate as follows
Menu->Settings->Basic Setting->WiFi
2) Press the Switch button to turn on WiFi feature.
3) Press the Save button to save the configuration.
How to connect to an available wireless network via phone interface:
1) Find Menu then navigate as follows
Menu->Settings->Basic Setting->WiFi: Available Network(s)
2) Press the Enter button, you will see many available wireless networks.
3) You can press the “scan” button to scan the wireless network.
4) You can press the “Detail” button to view a wireless network’s detail information.
5) Choose desired wireless network and then press the “Connect” button.
6) Enter the password if needed.
7) Normally, the phone will successfully connect to WiFi.
How to add a Wireless Network Manually via phone interface?
1) Find Menu then navigate as follows
Menu->Settings->Basic Setting->WiFi: The Storage Network.
2) Press the “Add” button to add a wireless network.
Select a Security Mode.
Enter the desired wireless network (SSID).
Enter the password if needed
3) Press the “Save” button to save the configuration.
You can choose this wireless network to connect it.
How to view Wireless Network status?
1) If the connection is successful, a wireless network icon will be displayed in the idle status bar.
If the connection is unstable, the icon will have a yellow exclamation point. If failed, the icon will
have a red fork sign.
Note: Contact your network administrator for the WiFi password.
How to Disable WiFi feature?
To disable the WiFi feature via phone interface:
1) Find Menu then navigate as follows:
Menu->Settings->Basic Setting->WiFi
2) Press the Switch button to turn off WiFi feature.
3) Press the Save button to save the configuration.